scusa da dove scarico il software? potresti gentilmente linkarmi il sito? perchè io ho trovato questo: [FIRMWARE FLASHER] Latest Pheonix Suite 1.06 for A31 devices va bene?
scusa da dove scarico il software? potresti gentilmente linkarmi il sito? perchè io ho trovato questo: [FIRMWARE FLASHER] Latest Pheonix Suite 1.06 for A31 devices va bene?
LG G2
ROM STOCK 4.2.2 RECOVERY TWRP 2.6.3.4 (Loki / usb-OTG)
Questo il link al firmware originale :Mediacom
se non ricordo male dentro c'è anche il soft
ciara81 (25-04-14)
Ho appena installato TWRP recovery + CM11 e funziona tutto molto bene: c'è solo qualche blocco nel menu impostazioni, ma che però non causa problemi.
Grazie schizo per questo ottimo porting!
Per quanto riguarda la durata della batteria e la ricezione del si fi c'è qualche miglioramento? Perchè a me mediamente dura dalle 2 alle 3 ore e quando è sotto carica giunto al 100%,inizia a decrescere.a voi risulta?
Inviato dal mio LG-D802 usando Androidiani App
LG G2
ROM STOCK 4.2.2 RECOVERY TWRP 2.6.3.4 (Loki / usb-OTG)
Hi
I would like to downgrade my device (current rom cm11)
i lost my backup (wrong sd card)
Please upload twrp recovery momo10s or mediacom 1040s2 original rom backup
Thx Csaba
hi ,
This is the direct link Mediacom Italy : 1040s2.zip
Hi
The button combination doesn't work after cm11 install. (Before cm11 install everything was ok)
So this is the reason,why ineed backup.
Thank you for your help
After installation of CM11 for the combination of keys you need to change the bootloader.
enter into TWRP recovery from system
install zip and reboot.
Pressing vol + and power for 5 sec. will enter TWRP
Bootloader-mod
i'm installing bootloader-keys.zip
screen text:
Updating partition detalils...
E:Unable to mount '/ recovery '
Installing ' /sdcard/bootloader-keys.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Updating partition dateils...
E:Unable to mount '/recovery'
after attempt
volume up and power 5mp => will enter TWRP recovery
long push volume up and power => starting system os
i will enter terminal (su) and i write reboot bootloader => will enter TWRP recovery
connect to pc (adb) and i write reboot bootloader => will enter TWRP recovery
phoenix suite clikk upgrade => will enter TWRP recovery
my device momo10s but hardwer not differ 1040s2
i'm look inside momo10s
Hardwer info
Battery: T-30100140P momo10s 3.7v 4200mah lion
Wifi: Reltek RTL8188ETV
Touchscreen: Goodix GT928
Nand flash: Toshiba TC58TEG6DCJTA00
Ultima modifica di donjon; 02-06-14 alle 19:19
Ciao,
anche io ho montato la CM11 by Schizo sul 1040s2: una bomba!
Grazie mille a Schizo che ha prodotto una ROM e una guida essenziale ed efficace.
Installare TWRP e CM11 è stato facile ed indolore, mai visto un sistema più semplice. A parte qualche voce del menù impostazioni che causa la chiusura forzata delle impostazioni per il resto il sistema è stabile e il 1040s2 si gode un bel KitKat croccante croccante (anche se il launcher di default, Trebuchet, è stato immediatamente sostituito, ma son gusti personali).
Domanda: sarà possibile seguire future release da parte di CM?
Sempre onore e gloria a Schizo