Originariamente inviato da
miticofuro
ECCO IL FIRMWARE in lingua italiana aggiornato al 29 settembre 2016
ecco le istruzioni, comunque ci sono diversi video su Youtube
Steps:
1. Copy the following 3 files to the SD card / U disk:
① recovery.img
② factory_update_param.aml
③ xxxx.zip
Note:“--update_package=” in the factory_update_param.aml, Determines the path to read the upgrade package.
If the SD card upgrade should be
--update_package=/sdcard/xxxxxxx.zip
If the u disk upgrade should be
--update_package=/udisk/xxxxxxx.zip
2. in the case of Unplug, insert the SD card / USB stick, and then use a small stick to stab into the AV jack, hold down the upgrade button inside. (Note: different models may be different buttons, the following figure to G9C as an example)
3. While holding down the Upgrade button, turn on the power until you see the upgrade progress bar on your TV (indicating that the system has started auto-upgrade), then release the Upgrade button and wait for the upgrade to complete. Do not disconnect the power supply.
4. After the upgrade, the system will automatically restart.
https://www.youtube.com/watch?v=yKcqjd-YEfk
in sintesi mettete i tre file in una sd appena formattata in fat 32, inserite la sd da tvbox spento, poi infilate uno stuzzicandenti dentro il buco AV e tenete premuto, accendete il tv box e dovrebbe partire la procedura (fa tutto da solo), poi si riavvia ed è fatta