[CUSTOM KERNEL][MOD] Cor Plenus et Cor Optimi v2

[gius01]

Da betterbatterystats ho visto kernel wakelock e since screen off.. il più alto è PowerManagerService seguito da wlan_rx_wake,poi bcm_sdhc.1 e bcm_sdhc.3. Ma questi ultimi 2 non sono tanto alti

Inviato dal mio iPhone 6 giallo con SO Android 4.3 e grafica Metro WP8 in esclusiva spaziale con Tapatalk 2

[Michelasso]

Da betterbatterystats ho visto kernel wakelock e since screen off.. il più alto è PowerManagerService seguito da wlan_rx_wake,poi bcm_sdhc.1 e bcm_sdhc.3. Ma questi ultimi 2 non sono tanto alti

Inviato dal mio iPhone 6 giallo con SO Android 4.3 e grafica Metro WP8 in esclusiva spaziale con Tapatalk 2

Tutto nella norma. Al limite hai il wifi che connette male. Il Deep Sleep a quanto era?

[Fahmi1597]

Michelle, it's normal when i'm making kernel and this is the out put text

c: At top level:
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3446: warning: function declaration isn't a prototype
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c: In function 'get_CHAL_AUDIO_MIXER_en':
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_NONE' not handled in switch
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_EP_STEREO' not handled in switch
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_IHF_STEREO' not handled in switch
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_HS' not handled in switch
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_PCM_IF' not handled in switch
../modules/../modules/drivers/sound/brcm/alsa_athena/soc/csl/audio/src/csl_aud_drv_hw.c:3483: warning: enumeration value 'AUDDRV_SPKR_V
and manny warning again
like this

In file included from net/core/netpoll.c:43:
net/core/../../drivers/usb/gadget/rndis.h:255: warning: 'struct gether' declared inside parameter list
net/core/../../drivers/usb/gadget/rndis.h:255: warning: its scope is only this definition or declaration, which is probably not what you want
net/core/netpoll.c: In function 'find_skb':
net/core/netpoll.c:337: warning: unused variable 'qlen'

and more,

it's correct? or not?

[Michelasso]

Yes, it's normal. That's how Broadcom is coding its software: badly. Still, this is not a thread to discuss about how to make a kernel. It's polluted enough. If have questions make a specific thread.

[gius01]

Tutto nella norma. Al limite hai il wifi che connette male. Il Deep Sleep a quanto era?

Come lo vedo?? Scusa non ho mai usato questo programma e con l'inglese tecnico non vado proprio d'accordo

Inviato dal mio iPhone 6 giallo con SO Android 4.3 e grafica Metro WP8 in esclusiva spaziale con Tapatalk 2

[samurri]

Il Deep Sleep è una voce che trovi in Other - Since unplugged

[Michelasso]

Come lo vedo?? Scusa non ho mai usato questo programma e con l'inglese tecnico non vado proprio d'accordo

Inviato dal mio iPhone 6 giallo con SO Android 4.3 e grafica Metro WP8 in esclusiva spaziale con Tapatalk 2

Lo vedi da qui, dove continueranno le discussioni sulla batteria:

https://www.androidiani.com/forum/sa...ml#post2033153

C'è una breve spiegazione su come usare BBS. Se abiliti il widget 2x2, come è scritto, vedi i parametri più importanti, tra i quali l'awake e il deep sleep.

[Fahmi1597]

Yes, it's normal. That's how Broadcom is coding its software: badly. Still, this is not a thread to discuss about how to make a kernel. It's polluted enough. If have questions make a specific thread.

arch/arm/mach-bcm215xx/board-tassve.c:173: warning: function declaration isn't a prototype
arch/arm/mach-bcm215xx/board-tassve.c:1321: warning: function declaration isn't a prototype
arch/arm/mach-bcm215xx/board-tassve.c:1336: warning: function declaration isn't a prototype
arch/arm/mach-bcm215xx/board-tassve.c: In function 'pmu_event_callback':
arch/arm/mach-bcm215xx/board-tassve.c:1443: warning: unused variable 'bat_adc_volt_mul'
arch/arm/mach-bcm215xx/board-tassve.c:1432: warning: unused variable 'i'
arch/arm/mach-bcm215xx/board-tassve.c: At top level:
arch/arm/mach-bcm215xx/board-tassve.c:1744: warning: initialization from incompatible pointer type
arch/arm/mach-bcm215xx/board-tassve.c: In function 'board_sysconfig':
arch/arm/mach-bcm215xx/board-tassve.c:2370: warning: ISO C90 forbids mixed declarations and code
arch/arm/mach-bcm215xx/board-tassve.c:2816: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c:2817: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c:2818: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c:2819: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c:2820: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c:2821: warning: suggest parentheses around arithmetic in operand of '|'
arch/arm/mach-bcm215xx/board-tassve.c: In function 'tassve_init_gpio':
arch/arm/mach-bcm215xx/board-tassve.c:2978: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2980: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2981: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2982: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2983: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2984: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2985: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c:2986: warning: left shift count is negative
arch/arm/mach-bcm215xx/board-tassve.c: At top level:
arch/arm/mach-bcm215xx/board-tassve.c:548: warning: 'wifi_pdata' defined but not used
arch/arm/mach-bcm215xx/board-tassve.c:1235: warning: 'update_power_sysparm' defined but not used
arch/arm/mach-bcm215xx/board-tassve.c:1808: warning: 'athenaray_i2c2_board_info' defined but not used
arch/arm/mach-bcm215xx/board-tassve.c:1818: warning: 'athenaray_i2c3_board_info' defined but not used

last question , sorry about it
and this?

[Michelasso]

Fahmi… What isn't clear about "if you have questions [about how to make a kernel] open a new thread"?

Anyway they are all warnings, not errors. If you don't understand what those warnings are I am afraid you should first work on your C programming skills. Because when those warnings will turn into errors, and trust me, they will as soon as you will start to modify the code, it will be a nightmare.

Now, if you want to discuss about how to make a kernel open a new thread. This is for the Cor kernels only.

[Marfor71]

Michelasso volevo darti un thanks per l'aggiornamento che hai postato ma non potevo farlo dal post specifico......una domanda, cosa è il wipe e a cosa serve e soprattutto quando lo si fà? da quello che ho capito mi sembra un operazione che se non si conosce bene si rischia di fare un gran bel casino...cmq il bootlogo a specchi colorati che volteggiano è troppo bello !!