Visualizzazione stampabile
-
Quote:
Originariamente inviato da
Michelasso
Is your governor always set to "performance"?? That would be wrong, it always keeps the highest frequency (832Mhz in your case). use ondemand or lagfree.
For testing you should try to use the other frequencies. Set them MAX=MIN=freq, with freq starting from 156MHz and raising. For each step you should try to reproduce the reboot. Then write it here the list of frequencies when the phone reboots.
Still, if you say that with Cor Plenus v2.0 it was fine I believe that something may be wrong in the installation and/or /data. 2.0 is supposed to be much worse than 2.02 in terms of reboots.
Which kernel are you sing right now anyway? I've got a bit lost.
PS: Biancale, ma non avevi detto che i tuoi reboot erano spariti?
Now i'm using cor optimi v1 with JellyPlus 2.0
Yesterday, i'm using fresh stock rom with cor plenus 2.0.2 with 624Mhz-156Mhz and governor is Ondemand. I/O is sio (I'm always use this for saving my battery if i'm go to school and no problem with CPlenus 2.0)
That condition still make my phone restarting (I'm not turning WiFi, but calling my friend ask for HW)
Maybe next time i'll try your solution, time to sleep here and tomorrow is exam.. thanks for helping michel, keep work if you have much time with better kernel for our device :D
Nice to join here
-
Quote:
Originariamente inviato da
Fahmi1597
Now i'm using cor optimi v1 with JellyPlus 2.0
Yesterday, i'm using fresh stock rom with cor plenus 2.0.2 with 624Mhz-156Mhz and governor is Ondemand. I/O is sio (I'm always use this for saving my battery if i'm go to school and no problem with CPlenus 2.0)
That condition still make my phone restarting (I'm not turning WiFi, but calling my friend ask for HW)
Maybe next time i'll try your solution, time to sleep here and tomorrow is exam.. thanks for helping michel, keep work if you have much time with better kernel for our device :D
Nice to join here
Well, when you have time please do. I forgot to ask which ROM people are using in the list. The mix of the two could cause issues too. But you were on stock ROM anyway. Still I need you to test it. You can install Cor Plenus v2.02, do the tests and install Cor Optimi v1 over it.
PS: Ma gli italiani sono tutti con la Wind?!
-
Quote:
Originariamente inviato da
Michelasso
PS: Ma gli italiani sono tutti con la Wind?!
Beh la TIM e la Vodafone hanno delle tariffe troppo care e la tre non prende dappertutto. Resta la Wind. :)
Del resto, c'è crisi rotfl
-
Ecco la mia esperienza:
- Tipo di scheda SIM: usim 3
- Età della scheda: 11 mesi
- Situazione in cui si verificano i reboot: frequentando un posto sconveniente (roaming rotfl), solo una volta
- Ogni quanto accadono: massimo 2-3 volte al mese se succede
- Quale CPU Governor/Frequenze usate (lo vedete con NO Frills CPU): 156-832 ondemand sio
- Se con il kernel stock perdevate il segnale e/o la connessione dati: no
- Se con il kernel Cor Plenus v2 avete mai perso il segnale e/o la connessione dati: no
Io ho avuto un'esperienza positiva con i vari kernel, probabilmente questo telefono predilige le sim recenti.
-
Il grafico inizia a mostrare quello che si sospettava da sempre… ossia che il problema è soprattutto con le schede Wind. Ma servono più dati…
Forza ragazzi!! Non siate timidi!! Votate e riportate la vostra esperienza!! :)
PS: peccato che il sondaggio sulla perdita del segnale/conessione dati nella sezione principale sia stato fatto male. Sarebbe stato interessante correlare i diversi dati!
-
- Tipo di scheda SIM: Wind 128K
- Età della scheda: 1 anno
- Situazione in cui si verificano i reboot: poco dopo l'inizio della chiamata
- Ogni quanto accadono: spesso
- Quale CPU Governor/Frequenze usate: quello standard
- Se con il kernel stock perdevate il segnale e/o la connessione dati: SI
- Se con il kernel Cor Plenus v2 avete mai perso il segnale e/o la connessione dati: non mi pare
-
Quote:
Originariamente inviato da
windman73
- Tipo di scheda SIM: Wind 128K
- Età della scheda: 1 anno
- Situazione in cui si verificano i reboot: poco dopo l'inizio della chiamata
- Ogni quanto accadono: spesso
- Quale CPU Governor/Frequenze usate: quello standard
- Se con il kernel stock perdevate il segnale e/o la connessione dati: SI
- Se con il kernel Cor Plenus v2 avete mai perso il segnale e/o la connessione dati: non mi pare
hai rom stock+kernel, oppure rom optimus+kernel? :)
-
Quote:
Originariamente inviato da
ZackFair84
hai rom stock+kernel, oppure rom optimus+kernel? :)
Custom Rom Optimus Pro Beta 3.1
Kernel Cor Plenus V.2.02
-
grazie per le info :) comunque, dato che ho visto che hai frequenti reboot, potresti provare a mettere il kernel cor optimi v.1, e vedere se la situazione migliora, intanto
-
Vabbè, mi pare ormai un dato di fatto che il problema è con il modulo 3G del kernel (stock) e alcune schede Wind. Che a quanto pare non gradiscono le nuove frequenze/voltaggi. Per chi ha i reboot, se mettete il telefono in 2G, questi finiscono?