SYIAH KERNEL con CWM 5
1. non c’è il bug del “Sistema Operativo Android”! Se guardi l’elenco delle app che ti hanno utilizzato la batteria, non hai percentuali assurde di consumo di questa voce, ma deve stare sempre tra il 2 e il 3 percento o ce qualcosa che non va!
2. BLN, così con un colpo d’occhio so se ho una chiamata persa, un sms una mail…
3. aggiunta la frequenza minima della CPU a 100mhz, con il giusto governor la CPU consumerà per forza un po’ meno.
4. supporto dell’app “2nd core”, utile per risparmiare batteria
5. personalizzazione delle bus frequency, molto facile con l’app “Voltage Control”, utile per risparmiare batteria
6. aggiunti governor della CPU personalizzati, in particolare da provare intellidemand, smartass e lulzactive
7. supporto dell’app “Lulzactive”, per personalizzarsi da soli il comportamento di questo governor
8. automounting delle chiavette formattate ntfs, quando con l’adattatore OTG attacco la chiavetta al telefono stendo tutti i colleghi/amici, non c’è dubbio!
9. backup automatico della partizione EFS (non si sa mai…)
10. possibilità di under-voltare, ma non serve poi molto
11. voodoo louder app support (thanks to supercurio), ma non serve poi molto
12. personalizzazione della boot animation, ma non la uso
(thanks to Scoman per le traduzioni ecc.)
Versione Odin 2.6.12
http://forum.xda-developers.com/atta...2&d=1328469219
Versione CWM 2.6.12
http://forum.xda-developers.com/atta...3&d=1328469219
SiyahKernel v2.6.12
FEATURES
Can be flashed on Samsung ROMs and AOSP Based ROMS. Currently all Samsung 2.3.4, 2.3.5, 2.3.6, 2.3.7 based ROMS, CM7 (CM9 or any other ICS based ROMs are not supported) and MIUI ROMS are supported.
Based on linux kernel 2.6.35.14 + drivers from Samsung sources
Auto-Rooting
Custom CWM compatible Redpill Recovery from af974 (For more info: http://forum.xda-developers.com/show...postcount=9680 )
Custom boot animation support
Supports SetCPU (OC upto 1600MHz, UC downto 100MHz)
User customizable frequency steps. You can edit "freq_table" and use 25MHz as the lowest step and 1696MHz as the highest. You have 8 steps (it is fixed) but the frequencies can be set.
Supports undervolting (UV between 800 mV and 1500 mV)
Supports voltage control via SetCPU (thanks to netarchy, ninpo, hacre)
Stock voltages as default
smartassV2, lulzactiveV2 governors. and lots of other governors which are available as modules
Default governor is lulzactive (200-1200MHz)
Tweaked ondemand and conservative governors
no compiler optimization. it is just a myth.
Touchscreen fix (thanks to vitalij)
Increased touchscreen sensitivity
GPU clock (thanks to netarchy), voltage and scaling thresholds control interface.
I/O, scheduler, hotplug and vm tweaks
automatic battery calibration. (removed. thanks to Entropy512. we do not need battery calibration for SGS2)
Available I/O schedulers: noop, deadline, CFQ, BFQV3r1, V(R), SIO(default)
Available CPU governors: see this thread for the list of available governors and modules (thanks to droidphile)
/system/etc/init.d startup scripts support
Automatic backup of efs partition. You will have the files in your sdcard as well as /data/.siyah directory. copy them to a safe location in case you may need them later.
BLN (thanks to creams), liblights is autoinstalled if the existing one doesn't support BLN
supports advanced touch tune driver. thanks to vitalij Link. the control app from Web, from Mobile. Thanks to tegrak for the driver patch file download
2nd core application support (thanks to tegrak)
Automounting of NTFS volumes for USB sticks (ntfs on external card is not supported). although your rom says "clear storage", just check /mnt/usb folder. ntfs drives will be automatically mounted in read-only mode.
LZOP compression for the kernel to have very fast decompression. We have a VERY BIG kernel image because we have ntfs-3g, CWMManager and lots of other things both in initramfs and payload.
Integrated new&faster sha-1, crc32 slice-by-8, crc32c, jhash and rwsem algorithms
SCHED_MC enabled to have less power consumption.
Lower brightness levels for low-light conditions to save battery.
Brightness behaviour modification via setting min_bl, min_gamma and max_gamma values. you can control the lowest and hightest levels used in autobrightness.
Native BLN support for CM7 based roms.
Three GPU stepping (160-267-300) instead of two
optimized and configurable hotplug thresholds and rates.
Thunderbolt! script integrated (thanks to pikachu01)
Voodoo louder app support (thanks to supercurio)
Current Widget support while charging the device.
Charging the battery stops when the battery draws less than 100mA (stock value is 200mA).
CIFS, SLUB, FUSE, NTFS, cgroup_timer_slack, autogroup,... and lots of other mambojambo that I forgot...