Oggi pomeriggio mi è uscita la notifica dell'aggiornamento a Android 10
Ho fatto l'aggiornamento e dopo il riavvio compare la scritta Android one e schermo nero, l'ho lasciato per una decina di minuti ma nessuna variazione, schermo completamente nero.
Ho provato quindi a riavviarlo e permane lo schermo nero dopo la scritta Android one.
Ho collegato il telefono al pc per seguire questa procedura https://c.mi.com/thread-2508611-1-1.html che di seguito riporto
So, you will need fastboot and adb tools: ADB and Fastboot
Than you will have to download and install: Mi Flash Tool
After that, you have to download latest rom: Mi A2 / Mi A2 Lite
This downloaded file, you have to extract.
Than boot your phone into fastboot mode and connect it via USB to Pc.
Than use these commands in CMD:
1. fastboot flashing unlock_critical (will reboot phone, you have to go again into fastboot and continue on step 2)
2. fastboot oem edl (phone screen will be blank)
Than open Mi Flash Tool and click on select and choose extracted folder. (image)
Than select on botton: clean all
After that check if your device is recognised as: com1,2,3...(any number)
Than select it and click on flash.
Flashing process takes 8-15 minutes and first boot can take 10 minutes.
Tuttavia il comando fastboot flashing unlock_critical non funziona. Mi dice Unknown command
Aiuto?