Qualcuno molto gentilmente potrebbe postare una copia completa della NVRAM fatta da MtkDroid (.bin+.tar) dello STAR N9002. Ho lo stesso problema dell'utente Jijino.. Il touchscreen completamente scalibrato.. Ormai le ho provate tutte, mi manca solo questo. Per favore..
hai un messaggio con i link per scaricare i file che ti servono. una volta scaricato sposta tutto nella cartella backupnvram di mtkdroidtool. fatto ciò, collega il telefono con debug usb attivo al pc, lancia mtkdroidtool, ripristino imei, restore e scegli i file che hai spostato nella cartella. attendi il ripristino, riavvia il telefono e deve essere tutto ok. spero che il tuo pronlema si risolva. un saluto...fammi sapere
ps. se non hai la cartella backup nvram creala facendo un backup dei tuoi imei, cancelli i file all'interno e sposti quelli che ti ho inviato.
quindi nessuno mi sa dire se ci sono sviluppatori di rom per STAR N9002 che fregatura
@AM3
Indica per favroe nel tuo primo post il baord iD (simcom89_wet_jb2) del tuo modello onde verificare che chi ha un altro 9002 stiamo parlando della stessa board.
Suggerisco una serie di imporvemnts per la tua ROM
/system/build,prop
ro.product.locale.language=it
ro.product.locale.region=IT
net.bt.name=N9002
ro.product.model=N9002
ro.product.name=N9002
ro.product.device=N9002
/system/etc/custom.conf
dm.Manufacturer = KINGZONE
dm.Model = N9002
bluetooth.HostName = N9002
wlan.SSID = N9002
Questo per avere i settaggi correttiu by default come lingua/tastiera/SSID Wifi e BT.
Poi bisognerebbe vedere se funzionano questi settings nel build.prop
ro.build.date.format=dd-MM-yyyy
ro.build.time.format=24
persist.sys.language=it
persist.sys.country=IT
; Install non market apps
ro.install.nonmarket.switch=yes
# set prouct brand name
ro.product.brand=KINGZONE
ro.product.manufacturer=KINGZONE
; set product model
ro.product.model=N9002
ro.product.name=N9002
ro.product.device=N9002
# set WIFI SSID and Bluetooth name
ro.build.bluetooth.name=N9002
ro.build.wifi.ssid=N9002
# disable boot aniimation
debug.sf.nobootanimation=0
# Incraese GPS accuracy
dalvik.vm.execution-mode=int:fast
@AM3
Indica per favroe nel tuo primo post il baord iD (simcom89_wet_jb2) del tuo modello onde verificare che chi ha un altro 9002 stiamo parlando della stessa board.
Suggerisco una serie di imporvements per la tua ROM
/system/build,prop
ro.product.locale.language=it
ro.product.locale.region=IT
net.bt.name=N9002
ro.product.model=N9002
ro.product.name=N9002
ro.product.device=N9002
/system/etc/custom.conf
dm.Manufacturer = KINGZONE
dm.Model = N9002
bluetooth.HostName = N9002
wlan.SSID = N9002
Questo per avere i settaggi correttiu by default come lingua/tastiera/SSID Wifi e BT.
Poi bisognerebbe vedere se funzionano questi settings nel
/system/build.prop
persist.sys.timezone=Europe/Amsterdam
ro.build.date.format=dd-MM-yyyy
ro.build.time.format=24
persist.sys.language=it
persist.sys.country=IT
# Install non market apps
ro.install.nonmarket.switch=yes
# set prouct brand name
ro.product.brand=KINGZONE
ro.product.manufacturer=KINGZONE
; set product model
ro.product.model=N9002
ro.product.name=N9002
ro.product.device=N9002
# set WIFI SSID and Bluetooth name
ro.build.bluetooth.name=N9002
ro.build.wifi.ssid=N9002
# disable boot aniimation
debug.sf.nobootanimation=0
# Incraese GPS accuracy
dalvik.vm.execution-mode=int:fast
Ultima modifica di bovirus; 21-04-14 alle 12:28