[ROOT] [help] Lenovo tablet 2 pro 1380L (13'3 con proiettore)

[nuvolaspeedy]

salve, ho bisogno di aiuto per fare il root a questo tablet.
principalmente xkè skygo si vede schiacciato e quindi vorrei provare qualke programma che mod i Dpi
e non ne ho trovati che funzionano senza Root (ne conoscete qualcuno?)

SkyGo_v2.7.1_Tablet_Ondemand_Ita_By_DFoX NON FUNZIONA crasha dopo il mes di non compatibilità del dispositivo
quindi ho dovuto installare SkyGo_v1.7.3_Smartphone_Ita_By_DFoX che FUNZIONA dopo il mes di non comp del disp.

ho gia provato di tutto.. Framaroot, root genius, towelroot, kingroot...
ma niente




(Ps. è strano non abbiate fatto una sezione per tablet Lenovo.. si vendono così poco?)

[nuvolaspeedy]

......niente?

[nuvolaspeedy]

uppete....

[nuvolaspeedy]

ho trovato questa guida... ma non sono molto pratico. qualk1 + pratico ha voglia di provare?

make sure you have downloaded and installed the adb / fastboot drivers for your device . . .
make sure you have enabled developer options / adb debugging under settings on your device . . .

make sure you have download the latest : UPDATE-SuperSU-vX.Xx.zip (http://download.chainfire.eu/supersu) and place it on your internal or external_sd

1 : download and extract IntelAndroid-FBRL-01-17-2015.7z (https://www.androidfilehost.com/?fid=95897840722644693) some where on your computer.
2 : double click the launcher.bat file to start , type " ACCEPT " case sensitive without quotes to continue

check that the tool is reporting as either :
DEVICE STATUS: ADB-ONLINE
DEVICE STATUS: FASTBOOT-ONLINE

If " DEVICE STATUS: UNKNOWN " please check your cable connection and driver installation under Windows Device Manager
If " DEVICE STATUS: UNAUTHORIZED " please check if your devices is displaying an authorization prompt be sure to check Always allow from this computer and then press ok

3 : select the trigger to launch the Temporary CWM Recovery Session support fastboot oem triggers are :

T1 oem startftm ( very few devices support this command , but its the original used so )
devices supported : coming soon

T2 oem backup_factory ( limited devices support this command )
devices supported : coming soon

T3 oem stop_partitioning ( should work on alot of kitkat builds )
devices supported : coming soon

4 : after selecting the trigger your device should reboot in to fastboot and begin to copy files to your device
note : if your device hangs at the waiting-for-device screen and you see droidboot CMD Waiting on your devices double check that the fastboot driver installed correctly.
note : if you see unknown oem command the trigger isn't supported by your device.

5 : The temporary cwm recovery session should be started at this point select install zip from the recovery menu using vol up / vol down to navigate and power to select
6 : select install zip from sdcard / external_sd depending on where you placed the file and select the UPDATE-SuperSU-vX.Xx.zip you downloaded earlier
7 : confirm the installation
8 : after install completes reboot your device

[nuvolaspeedy]

arrivo al punto 5... vado a selezionare recovery con i tasti volume... e poi come faccio a dare l'ok nn avendo il tasto fotocamera?? con il tasto proiettore nn funziona!!!

[nuvolaspeedy]

x ora questo metodo non funziona!!

[nuvolaspeedy]

aggiornati driver e nuova versione del programma - funziona con kitkat 4.4 e windows 7
CLOSED