Visualizzazione stampabile
-
Quote:
Originariamente inviato da
TheSolutor
Non esistono licenze a 32 o 64 bit esistono le licenze di win 7 ultimate, professional ecc...
Col seriale che possiedi puoi installare una 32 o una 64bit a parità di versione.
Annotato per il prossimo formattone ;)
Quote:
Originariamente inviato da TheSolutor
Peraltro puoi usare legalmente, per un mese qualsiasi versione di seven, senza neanche bisogno di immettere un seriale.
beh questo week end potrei provare a lanciarlo dal KVM sotto linux e vedere se riesco a flashare in virtuale ;)
Quote:
Originariamente inviato da TheSolutor
In ogni caso i driver flash a 32 bit dovrebbero essere installati e funzionare col sw di flash ufficiale One touch upgrade S.
Non ho provato personalmente ma tentare non costa nulla.
oki allora prima di tutto provo questa e vi faccio sapere.
Grazie
-
Hello, i ask one question :
I did with Sp Flash Tools a read back ROM but created file is one file i don't know how can I restore this file if something wrong with my phone ? Alcatel STAR
-
Quote:
Originariamente inviato da
androidn1
Hello, i ask one question :
I did with Sp Flash Tools a read back ROM but created file is one file i don't know how can I restore this file if something wrong with my phone ? Alcatel STAR
You need to split that file ROM_* (should be 900+MB) in single images of each partition. Mtk droid dools can do it.
The process was already detailed in message #45 and #55
But I try to summarize it again, in English.
#1 connect the phone (normally turned on and with the usb debug option enabled) and open MTK droid tools.
#2 Select the tab " root , backup, recovery", then click the button "to prepare file ROM_from Flash Tool".
#3 Select your oun ROM_* file, and you should be OK
After a while you will find a backup directory inside the MTK DT ones with all your partitions ready to be flashed via SP flash tool
-
Quote:
Originariamente inviato da
TheSolutor
You need to split that file ROM_* (should be 900+MB) in single images of each partition. Mtk droid dools can do it.
The process was already detailed in message #45 and #55
But I try to summarize it again, in English.
#1 connect the phone (normally turned on and with the usb debug option enabled) and open MTK droid tools.
#2 Select the tab " root , backup, recovery", then click the button "to prepare file ROM_from Flash Tool".
#3 Select your oun ROM_* file, and you should be OK
After a while you will find a backup directory inside the MTK DT ones with all your partitions ready to be flashed via SP flash tool
Thanks for your reply !
Do I need to set name of this single file with extension .bin or or just write the name "Read Back" process lasted about 20 minutes and size of this single file is 885mb.
Finally do i need to root my phone before split file from MTK DROID TOOLS ?
-
The single READ BACK file is done via Sp flash tool and should be called ROM_0_"something" (where something, is the name you choose when SP flash tool asked for a file name).
Quote:
Finally do i need to root my phone before split file from MTK DROID TOOLS ?
No you don't need the phone rooted.
BTW if you rooted the phone before the readback process, the big ROM_ file will be already rooted and so also the splitted sistem.img will be already rooted
In short if you flash it your phone will be already rooted.
Could be a good idea to do the process twice.
One to have a really virgin image (useful to restore it to the stock condition, for warranty reasons or to install the official updates) and one already rooted and with the recovery replaced (useful to restore it in a good condition, with a single step process, instead to flash the virgin image, then replace the recovery, then root the phone again)
-
Don't remember to flash the original custpack.img too if you want to apply official updates (not only recovery and system)
Inviato dal mio ALCATEL ONE TOUCH 4030D usando Androidiani App
-
R
Don't forget... :-D
Inviato dal mio ALCATEL ONE TOUCH 4030D usando Androidiani App
-
TheSolutor
Another thing I ask you: If I want only to read back recovery must to add .img extension after name and also for bootimg but I don't know start adress and lenght for e.g. recovery on scatter file hex is 0x1f8c000 what I should write respectively for recovery ?
Quote:
Originariamente inviato da
rimmon1971
Don't remember to flash the original custpack.img too if you want to apply official updates (not only recovery and system)
Inviato dal mio ALCATEL ONE TOUCH 4030D usando
Actually custpack is read/write without root and there is a framework. I have not seen on another android phones
-
Miscuso per l'ignoranza ma posso sapere qiali sono i vantaggi di roottare il telefono rispetto alla versione originale?
-
Quote:
Originariamente inviato da
giraffoz
Miscuso per l'ignoranza ma posso sapere qiali sono i vantaggi di roottare il telefono rispetto alla versione originale?
Nel caso del 6030D pochi, avevo il root e dopo qualche settimana ho preferito riportarlo originale.