[ROM] [ZTE Z7MAX] [Android 6.0] CM 13.0 unofficial

Visualizzazione stampabile

Visualizza 40 messaggi di questa discussione in una pagina

09-12-15, 10:55
narutonote

Ha, I almost forgot. From Beta1 beginning, insert the SD card name garbled, but will display SD card brand before Beta1.

Beta2 fast pull switch failure. Even close down the shortcut, from the right side of the pull or open the shortcut. It's very annoying...
09-12-15, 11:15
tigreos

Quote:

Originariamente inviato da LiveMoto

After formatting the SD-card in Android 6.0 and return it to a state of "portable" it ceased to be read in TWRP. If you select SD-card recovery TWRP freezes.

TWRP sees space on the sd-card, but when choosing a card in the section Restore permanently hangs. Mount does not work from a recovery.

I tried to format the card to FAT32 and extFAT on the PC. Did not help.
SD-Card is readable on a computer and in the CM12, but TWRP freezes and I can not make a backup or recover from it.:smoke:

Another SD card works in TWRP without problems. Her I have not formatted in Android 6.0. So the problem is in the SD-card.

I have the same problem....How to read the memory card (SDCard) on CM13 without make format??
10-12-15, 08:58
narutonote

Good morning, Paolo. I found ways to modify front-facing camera photo resolution size can be normal use front camera. But this is take temporary solution not effect a permanent cure method.
10-12-15, 09:08
PaoloW8

Quote:

Originariamente inviato da narutonote

Good morning, Paolo. I found ways to modify front-facing camera photo resolution size can be normal use front camera. But this is take temporary solution not effect a permanent cure method.

I have already fixed this bug :)
the only problem is that I have to upload the whole rom and not only a little fix
...so today (or tomorrow at the latest) I will upload the beta3
10-12-15, 09:15
narutonote

Thank you, Paolo. Thanks to you, we can experience the great CM13. Looking forward to your Beta3.:love:
10-12-15, 13:24
jadar

Hello Paolo,
I have installed beta2. Since then (because I travel much) I have lost my Wi-Fi connection and the phone is unable to scan Wi-Fi networks and connect to them
Thanks for great job (and help to come 😁)
Regards
11-12-15, 13:48
PaoloW8

link beta3 and changelog in first page
11-12-15, 14:53
Pstelios

I can't find it, it stops to beta2 :(
11-12-15, 14:58
PaoloW8

Quote:

Originariamente inviato da Pstelios

I can't find it, it stops to beta2 :(

lol right....
try now :)
11-12-15, 16:34
awssong

Quote:

Originariamente inviato da paolothlw8

link beta3 and changelog in first page

Your private library has not been updated for a long time? When to upload? Thank you for your excellent ROM
11-12-15, 17:19
awssong

Quote:

Originariamente inviato da paolothlw8

link beta3 and changelog in first page

Ask a more mentally retarded question, CM's source code is generally in a day when the update is appropriate? Is it morning or afternoon? Or at night, thank you!
11-12-15, 19:06
mai62

Stock browser crashes when trying to download the file.
12-12-15, 00:29
awssong

Quote:

Originariamente inviato da paolothlw8

link beta3 and changelog in first page

You provide the latest ROM the status bar and desktop time not update automatically? Don't know if you have this problem, I am after all wipe brush into the.
12-12-15, 14:27
flasher

Pablo, thanks for your work. The Cm is amazing and my issue from Post 179 is away. The Rom is very smooth. Thanks an i look at the final CM13. Thanks
13-12-15, 14:42
awssong

You provide the WIFI beta3 drop-down menu, click no response, the new CM source code in the synchronization today has been normal use. WIFI connection is relatively stable.
13-12-15, 15:58
hobo

hey I have a few questions:

1. Can I use xposed on this rom without problems?
2. Can I update from 5.1.1 directly to this rom?
3. Are the security isseus (like starfright) fixed

thanks in advance
13-12-15, 19:57
PaoloW8

Quote:

Originariamente inviato da awssong

You provide the WIFI beta3 drop-down menu, click no response, the new CM source code in the synchronization today has been normal use. WIFI connection is relatively stable.

I know
I sync & compile every day
13-12-15, 19:58
PaoloW8

Quote:

Originariamente inviato da hobo

hey I have a few questions:

1. Can I use xposed on this rom without problems?
2. Can I update from 5.1.1 directly to this rom?
3. Are the security isseus (like starfright) fixed

thanks in advance

1) I don't know, I not use xposed...if exist xposed for marshmallow 6.0.1 I think yes
2) no
3) sure :)
13-12-15, 20:21
inigoml

Quote:

Originariamente inviato da hobo

hey I have a few questions:

1. Can I use xposed on this rom without problems?
2. Can I update from 5.1.1 directly to this rom?
3. Are the security isseus (like starfright) fixed

thanks in advance

It's important to read first post. I doesn't take a lot of time. If you had read it, questions 2 and 3 would be already responded. Remember starfright bug was solved months ago.
Xposed framework has issues with Marshmallow. If you read first page at official thread at XDA, it would have also already answered.

Thank you!
13-12-15, 23:01
inigoml

One possible bug and/or unexpected behavior.
When charging device, screen turns on and off without randomly, between seconds and minutes without receiving any event (message, etc).
This only happens when charging.

Anybody has experienced this issue?
14-12-15, 03:54
awssong

Quote:

Originariamente inviato da paolothlw8

I know
I sync & compile every day

What is the problem with the front camera? Can you tell me? Thank you Bother you
14-12-15, 07:21
PaoloW8

Quote:

Originariamente inviato da awssong

What is the problem with the front camera? Can you tell me? Thank you Bother you

try with this patch
Gerrit Code Review
14-12-15, 09:13
awssong

Quote:

Originariamente inviato da paolothlw8

try with this patch
Gerrit Code Review

Thanks!Paolo
14-12-15, 15:43
awssong

Quote:

Originariamente inviato da awssong

Thanks!Paolo

I will not use GIT download, I downloaded the tar file directly, and then replace all the files under hardware/qcom/display/msm8974, the problem is there, is not the replacement hardware/qcom/display-caf/msm8974?
15-12-15, 00:39
awssong

Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/instrumentation_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/indirect_reference_table_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/invoke_type_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/jdwp/jdwp_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/jdwp/jdwp_constants_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/lock_word_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/mirror/class_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/oat_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/object_callbacks_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/profiler_options_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/quick/inline_method_analyser_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/runtime_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/stack_operator_out.cc
Copy: /home/syai2012/android/aicp/out/target/product/nx505j/obj/SHARED_LIBRARIES/libart_intermediates/thread_operator_out.cc
Makefile:130: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory '/home/syai2012/android/aicp/kernel/nubia/nx505j'
build/core/tasks/kernel.mk:233: recipe for target 'TARGET_KERNEL_BINARIES' failed
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: *** 正在等待未完成的任务....

#### make failed to build some targets 48m:08s

I was in the process of compiling, encountered this error, what is the reason?
15-12-15, 05:45
nubiaz7max

HiPaolo
There is already some guys in chinese forum using your device code to compile rom with bloatware.

bbs.nubia.cn/thread-573319-1-2.html

there is no dfference compared to your cm13 but MORE BUGS AND SEVERAL JUNK APPS.
15-12-15, 16:10
hobo

I updated yesterday, and it worked perfect for a few hours but then it got stuck in a bootloop. Then I reflashed everything and it seems to be fixed so thank you very much paul for this awesome rom!!
16-12-15, 03:17
awssong

Quote:

Originariamente inviato da nubiaz7max

HiPaolo
There is already some guys in chinese forum using your device code to compile rom with bloatware.

bbs.nubia.cn/thread-573319-1-2.html

there is no dfference compared to your cm13 but MORE BUGS AND SEVERAL JUNK APPS.

Resolutely refused to add third hair or software
17-12-15, 16:00
hobo

hey paul is it possible to use 3g on both simcards?, I only get 3g on sim1 :/
18-12-15, 08:44
RoboTrigger

Quote:

Originariamente inviato da hobo

hey paul is it possible to use 3g on both simcards?, I only get 3g on sim1 :/

Paolo can't help you with that, it's a hardware limitation of the device. It's only capable of 3g/4g on one sim and 2g on the other.
18-12-15, 11:33
hobo

that's weird because on the other rom (Lollipop Nubia Z7 Max mod by pesa1234) you can use both cards for 3g and 4g
18-12-15, 11:37
PaoloW8

Quote:

Originariamente inviato da hobo

hey paul is it possible to use 3g on both simcards?, I only get 3g on sim1 :/

you can one sim at a time (hardware limitation)
just set the sim 1 in gsm only and sim 2 in global
18-12-15, 16:23
hobo

It might be a bug then? I can only choose global on sim1(slot 1), even if I only have sim 2(slot 2)in my phone I can't change it. (only gsm can't choose global on slot2)
18-12-15, 18:17
flasher

Yesterday i make a Backup with Titanium. The Backupfile ia on the SD Card. This is a SanDisk with 64GB Storage. But Titanium says It is not enough memoryspace available. But there is about 30Gb free. What is the issue? And what can i do?
19-12-15, 09:13
narutonote

Hello, Paolo. Recently there is a new version released? Beta3 is very good. Looking forward to your reply.If not, we will continue to wait for your new work. Thanks
19-12-15, 10:09
PaoloW8

Quote:

Originariamente inviato da flasher

Yesterday i make a Backup with Titanium. The Backupfile ia on the SD Card. This is a SanDisk with 64GB Storage. But Titanium says It is not enough memoryspace available. But there is about 30Gb free. What is the issue? And what can i do?

for backups it is preferable to use the internal memory

Quote:

Originariamente inviato da narutonote

Hello, Paolo. Recently there is a new version released? Beta3 is very good. Looking forward to your reply.If not, we will continue to wait for your new work. Thanks

beta 4 today or tomorrow at the latest :)
19-12-15, 13:14
PaoloW8

beta4 in first page
20-12-15, 17:28
flasher

Thanks for Rom. Now i have H+ with German Vodafone.:lol:
24-12-15, 12:51
narutonote

Hi, Paolo. Recently Nubia official forum appeared a lot of self compiled ROM CM13.
They are all more or less a problem. Some ROMer even built third party junk software to profit. Use your source, but no thanks.
We strongly resisted these ROMer. CM series of ROM, we still trust Paolo's work We will always support you.
Thanks.
25-12-15, 00:29
narutonote

Merry X‘mas!

Visualizza 40 messaggi di questa discussione in una pagina