Ok Mussonero,
ho installato i drivers che mi hai indicato e ha funzionato.
Sono riuscito a tirare fuori sia il logcat che il dmesg.
Nel dmesg perņ ho notato che da 1.688187 a 2.098612 tenta di installare il driver per il touchscreen Focaltech FT5406.
L'installazione fallisce e non vedo alcun tentativo successivo di installare il Goodix Gt928.
Ti mando di seguito il pezzo di dmesg, con un po' di righe prima e dopo il pezzo del focaltech. (come devo fare se voglio mandarti i file completi?)
<6>[ 1.687161] android_usb gadget: Number of LUNs=2
<6>[ 1.687187] lun0: LUN: removable file: (no medium)
<6>[ 1.687212] lun1: LUN: removable file: (no medium)
<6>[ 1.687396] android_usb gadget: android_usb ready
<6>[ 1.687577] mousedev: PS/2 mouse device common for all mice
<6>[ 1.687760] input: rk29-keypad as /devices/platform/rk29-keypad/input/inpu
t0
<4>[ 1.688037] +++++++++++++++++++++++++++++liqing.
<6>[ 1.688187] ft5x0x_ts 2-0038: ft5x0x_ts_probe!
<3>[ 2.096433] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 2...
<3>[ 2.096584] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 1...
<3>[ 2.096730] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 0...
<3>[ 2.096878] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 2...
<3>[ 2.097023] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 1...
<3>[ 2.097168] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 0...
<3>[ 2.097315] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 2...
<3>[ 2.097459] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 1...
<3>[ 2.097605] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 0...
<3>[ 2.097752] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 2...
<3>[ 2.097898] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 1...
<3>[ 2.098043] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 0...
<3>[ 2.098190] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 2...
<3>[ 2.098336] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 1...
<3>[ 2.098481] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnorm
al power-on, retry 0...
<4>[ 2.098525] FT5406 I2C TEST ERROR!
<3>[ 2.098579] Error: Driver 'ft5x0x_ts' is already registered, aborting...
<4>[ 2.098612] Register 5406_ts driver failed.
<4>[ 2.098634] ft5x0x module init
<3>[ 2.098663] Error: Driver 'ft5x0x_ts' is already registered, aborting...
<4>[ 2.098909] sensor_register_slave:lis3dh,id=4
<4>[ 2.098934] sensor_register_slave:light_photoresistor,id=40
<6>[ 2.109239] using rtc device, wm831x, for alarms
<6>[ 2.109285] wm831x-rtc wm831x-rtc: rtc core: registered wm831x as rtc0
<6>[ 2.111308] Linux media interface: v0.10
Touchscreen Goodix
Visualizzazione stampabile
-
22-03-15, 15:45Fernando74
-
22-03-15, 15:57mussonero
Fai un allegato meglio,, o vai a patebin.com e mandaci il link
Inviato dal mio RockChip<RK> usando Androidiani App -
22-03-15, 16:14sfumato
Forse intendevi pastebin.com?
Oppure in alternatica Copy-Paste online
Specifica anche il dmesg di quale kernel e da chi e stato compilato. Ciao -
22-03-15, 16:25mussoneroSi intendevo pastebin.com,,, grazie sfumatoQuote:
Originariamente inviato da sfumato
Inviato dal mio RockChip<RK> usando Androidiani App -
22-03-15, 18:26Fernando74
Ciao sfumato e mussonero,
ecco i link di pastebin
Logcat 1/2: Logcat 1/2 - Pastebin.com
Logcat 2/2: Logcat 2/2 - Pastebin.com
Dmesg: Dmesg - Pastebin.com
La rom che ho utilizzato č quella di mussonero: CM12_Experimental_V2_Build_Med -
22-03-15, 18:47sfumato
Potresti fare un dmesg con il mio di kernel?
Se vuoi ti rimando il link -
22-03-15, 18:53Fernando74
Ok per sicurezza ridammi link del kernel. Devo repackarlo nella rom di mussonero giusto?
-
22-03-15, 19:43Fernando74
ecco il dmsg con il kernel di sfumato:
<6>[ 1.828840] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.829089] xt_time: kernel timezone is -0000
<6>[ 1.829224] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.829339] arp_tables: (C) 2002 David S. Miller
<6>[ 1.829390] TCP cubic registered
<6>[ 1.829408] Initializing XFRM netlink socket
<6>[ 1.829771] NET: Registered protocol family 10
<6>[ 1.830276] Mobile IPv6
<6>[ 1.830308] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.830423] IPv6 over IPv4 tunneling driver
<6>[ 1.830987] NET: Registered protocol family 17
<6>[ 1.831027] NET: Registered protocol family 15
<6>[ 1.837274] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.837305] Bluetooth: RFCOMM socket layer initialized
<6>[ 1.837331] Bluetooth: RFCOMM ver 1.11
<6>[ 1.837351] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.837377] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.837495] NET: Registered protocol family 35
<6>[ 1.837574] [BT_RFKILL]: Enter rfkill_rk_init
<6>[ 1.837678] [BT_RFKILL]: Request irq for bt wakeup host
<6>[ 1.837715] [BT_RFKILL]: ** disable irq
<6>[ 1.863586] [BT_RFKILL]: bt shut off power
<6>[ 1.893528] [BT_RFKILL]: rk903_26M device registered.
<5>[ 1.893603] Registering the dns_resolver key type
<6>[ 1.893991] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t 9 rev 4
<5>[ 1.894045] Registering SWP/SWPB emulation handler
<3>[ 1.894505] rk_cam_cif(3093):rk30-camera version: v0.3.9 Zoom by ipp<<-GT
P-INFO->>[1281]GTP driver install.
<4>[ 1.895862] <<-GTP-INFO->>[985]GTP Driver Version:V1.2<2012/06/08>
<4>[ 1.895895] <<-GTP-INFO->>[986]GTP Driver build@16:01:52,Mar 18 2015
<6>[ 1.973646] input: Goodix Capacitive TouchScreen as /devices/virtual/input
/input1
<4>[ 1.973850] <<-GTP-INFO->>[1052]GTP works in interrupt mode.
<4>[ 1.974232] <<-GTP-INFO->>[738]IC VERSION:00_0000
<4>[ 1.974282] <<-GTP-FUNC->> Func:goodix_ts_init@Line:2676
<4>[ 1.974308] <<-GTP-INFO->> GTP driver installing...
<3>[ 1.974396] Error: Driver 'ft5x0x_ts' is already registered, aborting...
<6>[ 1.974459] i2c i2c-0: sensor_probe: gs_mma8452,0xf01bc800
<3>[ 1.974726] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 2...
<3>[ 1.974989] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 1...
<3>[ 1.975249] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 0...
<3>[ 1.975510] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 2...
<3>[ 1.975769] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 1...
<3>[ 1.976028] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 0...
<3>[ 1.976288] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 2...
<3>[ 1.976547] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 1...
<3>[ 1.976805] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnorm
al power-on, retry 0...
<4>[ 1.976848] sensor_chip_init:fail to read gs_mma8452 devid:0xff
<3>[ 1.976878] i2c i2c-0: sensor_probe failed -11
<3>[ 1.976883]
<4>[ 1.976913] sensors: probe of 0-001d failed with error -11
<6>[ 1.976950] i2c i2c-0: sensor_probe: gs_lis3dh,0xf01bca00
<4>[ 1.977210] sensor_chip_init:gs_lis3dh:devid=0x33,ops=0xc0d064 00
<6>[ 1.979377] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-0019/in
put/input2
<4>[ 1.983621] sensor_irq_init:use irq=304
<4>[ 1.983733] sensor_misc_device_register:miscdevice: mma8452_daemon
<4>[ 1.983765] sensor_probe:initialized ok,sensor name:lis3dh,type:1,id=4
<4>[ 1.983772]
<6>[ 1.983827] sensor_init: Probe name sensors
<4>[ 1.983860] sensor-dev.c v1.3 add sensor debug support 2013-3-15
<6>[ 1.986119] wm831x-rtc wm831x-rtc: setting system clock to 2011-01-01 12:1
3:04 UTC (1293883984) -
22-03-15, 21:10mussoneromolto intestante :),perche (vedo i driver per gt801plus_819_8105_8110 ma non per GT9XX seria ) prova questo kernel e fammi un dmesg veloce link kernel.img ho tolto tutti i extra input touche configurazione che avevo per vedere come vaQuote:
Originariamente inviato da Fernando74
-
22-03-15, 21:17sfumato
infatti ha caricato il driver "<6>[ 1.973646] input: Goodix Capacitive TouchScreen as /devices/virtual/input
/input1" ora pero bisogna scoprire qual'č l'indirizzo i2c e quali sono i piedini di reset e interrupt io non conoscendoli ho tentato con i mie tu invece mussonero dovresti saperli.
per poi inserirli nel file gt928.h gt928.c puoi prenderli dal mio kernel postati in github in /drivers/input/toucscreen/
e cambiare anche la risoluzione
#define GTP_MAX_HEIGHT 800 in 1280
#define GTP_MAX_WIDTH 480 in 800
e
#define GTP_I2C_NAME "ft5x0x_ts" //"Goodix-TS" in "Goodix-TS"
lo fai tu?
