[ROM] [JB] Team EOS 3 * Jellybean * Le nightly - Maguro

Quote:

---

Originariamente inviato da giannib

Dipende dalle gapps se sta o no la fotocamera..non sò perché ma e cosi

---

ho anche provato ad installare le gapp vecchie che prima mi funzionavano, ma niente

maguro #117 [Jenkins]

Changes
crespo common: Use the crespo kernel and defconfig.

Change-Id: I2987d4046203e7e89b6e65bbb90623ea32574c09

-- Chris Trotman / detail
Add the essentials that are needed to get a device to boot.

Change-Id: If70f83c1874e53af8d9b5513d6212a126fe2e370

-- Chris Trotman / detail
Add crespo4g to the lunch menu.

Om nom nom nom.

Change-Id: If86a2e2ad9c51a65a6aba5018affeae3c64394a8

-- Chris Trotman / detail
Merge "Improve StatusBar Volume Control" into jellybean


-- Chris Trotman / detail
Improve scrolling cache

Scrolling cache helps make short scrolls/flings smooth but will
cause stutter when long flings are made. This patch disables
scrolling cache when long flings are made.

This patch also fixes a related bug where scrolling cache will
not be enabled properly when transitioning from flinging to scrolling.

Patch Set 2: Calculate threshold based on maximum velocity (Sang Tae Park)

Change-Id: I1fdbaad92263c9f983a32900e74eba1f0367902b

-- Pawit Pornkitprasan / detail
ARM: Makefile: tuning: Adapt makefile tuning to use MACH_GROUPER

These makefile tuning options where originally developed by Kenny Crudup, for
the stingray.

Change-Id: Ia839cd9dba49b43dc28b997f292459b9ba7596d5

-- Chris Trotman / detail
ARM: Makefile: tuning: improve compatibility with several compilers

With these changes, I have been able to successfully build with:

arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc [1]
arm-eabi-4.4.3/bin/arm-eabi-gcc
arm-linux-androideabi-4.6/bin/arm-linux-androideabi-gcc
arm-linux-androideabi-gcc (Linaro GCC 4.7-2012.05) 4.7.1 20120514 (prerelease)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010q1-202) 4.4.1

[1] - section heading error in arch/arm/mach-tegra/pm-t2.c

-- Kenneth R. Crudup / detail
ARM: Makefile: Unify custom per-machine GCC build options to one place

commit 7478c7f0 (hardfloat + toolchain change) scattered a bunch of
GCC options all over "Makefile" and "arch/arm/Makefile", some of them
either redundant, unnecessary or duplicated. Roll back both Makefiles
to their kernel.org standard, and add the "CONFIG_EOS_MAKE_TUNING"
Kconfig option so that any GCC build options may be consolidated
there (and customized per-machine or per-cpu if desired).

Add some preferred options for the Moto Xoom (MACH_STINGRAY) to start.

Conflicts:
arch/arm/Kconfig
arch/arm/Makefile

Change-Id: I32c632bddcd2cc911cbb5ebca9d3273ebba73432

-- Kenneth R. Crudup / detail
defconfig: Enable MMC_SDHCI_NATIVE_BLOCKSIZE

Change-Id: Ia748a06100a6b666a043bfda852b14376f3ea234

-- Chris Trotman / detail
mmc: host: sdhci: Allow use of controller's native max blocksize

Currently, any controller supporting a blocksize of 4K or higher
is bumped back down to 512 bytes. This change allows using the
controller's native blocksize on a per-hardware basis.

Conflicts:

drivers/mmc/host/sdhci.c

-- Kenneth R. Crudup / detail
defconfig: Use ext4 for ext2 and ext3 file systems.

Change-Id: Ib49282f7a8975abe067d44c2079d8b4f4bfd639a

-- Chris Trotman / detail
defconfig: Add eos to the local version.

Change-Id: I35557333a3bcae9910860dd860dd5ff63b9789a0

-- Chris Trotman / detail
defconfig: Align the local version number with the rest of the kernels.

Change-Id: I9505c5cabeb5dda52790bab23cd739729f9e3555

-- Chris Trotman / detail
defconfig: Align the local version with the rest of the kernels.

Change-Id: I5f982c2003d102b29d4b774d4f943cd2e881a177

-- Chris Trotman / detail
defconfig: Switch to Eos3 Local version number.

Change-Id: I2d430ffb20721534315ba7e1253fdfea1a5455c0

-- Chris Trotman / detail
This project was added to the manifest.
-- unknown / detail
ARM: Makefile: tuning: Adapt makefile tuning to use MACH_TUNA

These makefile tuning options where originally developed by Kenny Crudup, for
the stingray.
Also disable a few flags that result in the tuna device not booting.

Change-Id: Ia270431084db9da102bede51248e401984dee61c

-- Chris Trotman / detail
ARM: Makefile: tuning: improve compatibility with several compilers

With these changes, I have been able to successfully build with:

arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc [1]
arm-eabi-4.4.3/bin/arm-eabi-gcc
arm-linux-androideabi-4.6/bin/arm-linux-androideabi-gcc
arm-linux-androideabi-gcc (Linaro GCC 4.7-2012.05) 4.7.1 20120514 (prerelease)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010q1-202) 4.4.1

[1] - section heading error in arch/arm/mach-tegra/pm-t2.c

-- Kenneth R. Crudup / detail
ARM: Makefile: Unify custom per-machine GCC build options to one place

commit 7478c7f0 (hardfloat + toolchain change) scattered a bunch of
GCC options all over "Makefile" and "arch/arm/Makefile", some of them
either redundant, unnecessary or duplicated. Roll back both Makefiles
to their kernel.org standard, and add the "CONFIG_EOS_MAKE_TUNING"
Kconfig option so that any GCC build options may be consolidated
there (and customized per-machine or per-cpu if desired).

Add some preferred options for the Moto Xoom (MACH_STINGRAY) to start.

Conflicts:
arch/arm/Kconfig
arch/arm/Makefile

Change-Id: I32c632bddcd2cc911cbb5ebca9d3273ebba73432

-- Kenneth R. Crudup / detail
defconfig: Enable MMC_SDHCI_NATIVE_BLOCKSIZE

Change-Id: I67db9382380f2aeae9ea28f6e7c2d133a047c22b

-- Chris Trotman / detail
mmc: host: sdhci: Allow use of controller's native max blocksize

Currently, any controller supporting a blocksize of 4K or higher
is bumped back down to 512 bytes. This change allows using the
controller's native blocksize on a per-hardware basis.

Conflicts:

drivers/mmc/host/sdhci.c

-- Kenneth R. Crudup / detail
defconfig: Add eos to the local version.

Change-Id: If52923e0b898584cd6084282e74d13349c19f66a

-- Chris Trotman / detail
Build "fstrim"

Now that we're turning on "discard" on /data, "fstrim" can be used
to have the EMMC controller reset/erase any blocks the filesystem
isn't currently using (helps reduce NAND fragmentation, and write-
amplification when the EMMC becomes full).

Change-Id: I1d4742b81aa8080c705141fdac8131566c8c9724

-- Kenneth R. Crudup / detail
This project was added to the manifest.
-- unknown / detail
Crespo(4G) JRO03H broadcom binaries.

Change-Id: I8439c90eeef77f6279e7ba63e0a69f9bd7cc3c7a

-- Chris Trotman / detail
CameraLauncher: Change to use the same code as the lockscreen.

This is to avoid using the somewhat buggy method of calling the camera
intent directly.

Change-Id: I20d7945076ec0bdbc9205cb2f52c52b0d343bed3

-- Chris Trotman / detail
Add the "fstrim" binary

Change-Id: I941a30e1d28b26b0d197da6a1c2dfc1ae72095b5

-- Kenneth R. Crudup / detail
Crespo(4G) JRO03H imgtec binaries.

Change-Id: I012cbf273045275c797bc3f9094afd9995445c9d

-- Chris Trotman / detail
Cleanup of NVidia proprietaries (2 of 2)

Remove proprietaries now in JRO03H-level NVidia proprietaries
Remove build-supplied /system/etc/audio_effects.conf

Change-Id: If7c0d463fc53ea7c89b4e2abc1a963c2d2ec5e7c

-- Kenneth R. Crudup / detail
Cleanup of NVidia proprietaries (1 of 2)

Resume building libpkip.so from NVidia-supplied source

Change-Id: Ie62b28b9fdf35f5c0eba98c0c99de384c64e53df

-- Kenneth R. Crudup / detail
Wingray JRO03H

Change-Id: Iaee69f0d7126740ab047292832a1d4c0721b10c6

-- Kenneth R. Crudup / detail
This project was added to the manifest.
-- unknown / detail
Crespo4g: Only define packages if the target is crespo4g

Change-Id: Iba1309e07f8126c8b0483ec15782ebd4068c5f9b

-- Chris Trotman / detail
Crespo(4G) JRO03H samsung binaries.

Change-Id: Ic29a767500f5e7bccef838058d1229c25c66c8af

-- Chris Trotman / detail
Crespo(4G) JRO03H widevine binaries.

Change-Id: I89cca8b74ee6ded091afcf2ba2b902c04327b091

-- Chris Trotman / detail

Ei ciao ragazzi sono nuovo! Arrivo da un S2 con le experimental CM10 dopo aver passato un sacco di tempo su cm9! Ora monto la jellybro con leankernel...a questo punto dello sviluppo..ad oggi...è migliore questa EOS rispetto alla euroskank che monto? Grazie per l'aiuto in anticipo!

Tapatalk @ Galaxy Nexus

Quote:

---

Originariamente inviato da edwardeutsch

Ei ciao ragazzi sono nuovo! Arrivo da un S2 con le experimental CM10 dopo aver passato un sacco di tempo su cm9! Ora monto la jellybro con leankernel...a questo punto dello sviluppo..ad oggi...è migliore questa EOS rispetto alla euroskank che monto? Grazie per l'aiuto in anticipo!

Tapatalk @ Galaxy Nexus

---

a batteria sicurmente si ma a personalizzazione la euroshank è superiore..se vuoi usare la cyano10 ti consiglio la official build (c'è un post apposta :D )..io monto la EOS è mi bastano i toggle, power menù e la % nella batteria ;)

Quote:

---

Originariamente inviato da giannib

a batteria sicurmente si ma a personalizzazione la euroshank è superiore..se vuoi usare la cyano10 ti consiglio la official build (c'è un post apposta :D )..io monto la EOS è mi bastano i toggle, power menù e la % nella batteria ;)

---

La batteria qui cala a vista d'occhio...grazie ancora!

Tapatalk @ Galaxy Nexus

Quote:

---

Originariamente inviato da fritz87

ho anche provato ad installare le gapp vecchie che prima mi funzionavano, ma niente

---

devi scaricare le ultime Gapps dal 1 post il link

118 in upload :) stasera vi faccio lo screenshot della 117 ;) quasi 1 giorno e mezzo di utilizzo e ancora il 49%

Gianni!! manca poco e la #118 esce dalla cucina! .. io sto aspettando la fila per ultimo quasi.. interessante quella di oggi per lo xoom.. :D

Quote:

---

Originariamente inviato da giannib

devi scaricare le ultime Gapps dal 1 post il link

---

Ho risolto cosi grazie

Inviato dal mio GT-P5100 con Tapatalk 2