Visualizzazione stampabile
-
Quote:
Originariamente inviato da
kalel77
Noti differenze di consumo col pocket detection?
NO, direi di no ... considerando che ultimamente, senza il pocket detection, spesso mi ritrovavo lo schermo acceso !!!
ma ... da quando ho la zenROM ho attivato da subito il pocket detection, quindi il paragone non è reale
in quanto il confronto lo posso fare solo con le precedenti ROM
-
Chiedo perché magari sbaglio,ma il sensore di prossimità è sempre in funzione
-
Quote:
Originariamente inviato da
kalel77
Chiedo perché magari sbaglio,ma il sensore di prossimità è sempre in funzione
si lo so ... avevamo già trattato questo argomento.
ma io che uso il double tap, senza pocket detection, avrei lo schermo sempre acceso che mi tira giù la batteria !!!
-
Ragazzi a voi funziona il bln?
-
Quote:
Originariamente inviato da
emlock
Ragazzi a voi funziona il bln?
Sul mio funziona, ma ho lasciato tutto attivo, tu hai disabilitato qualche features ?
-
Sì swype2wake e quelle associate che non mi servono
-
Quote:
Originariamente inviato da
emlock
Sì swype2wake e quelle associate che non mi servono
Devi tenere attivo almeno doubleTap2wake per avere anche il BLN funzionante
-
Come faccio per modificare il file elementalx.config?
-
Quote:
Originariamente inviato da
emlock
Come faccio per modificare il file elementalx.config?
Con un file explorer (es. ES File Explore, Root Explore)
direttamente dal telefono
cerchi il file che ti interessa, e lo modifichi
salvi e riavvii il telefono !
Quote:
NOTES:
Configuration
Your choices in the Aroma installer are used to build a configuration file. The config file is located at /etc/elementalx.conf. You can edit this file to change kernel settings. Whatever is set in this file will take effect when the device is booted (unless other scripts or apps interfere!)
The settings can be changed by editing /etc/elementalx.conf and rebooting. Advanced users can apply settings on the fly by running /etc/init.d/99elementalx as root.
There is no need to edit /etc/init.d/99elementalx. All settings are configured in /etc/elementalx.conf.
If settings are not sticking, make sure the file permissions for /etc/init.d/99elementalx are set to execute. Every time the settings are applied, a log file is created at /data/local/tmp/elementalx-kernel.log. Problems can be diagnosed by looking at the log file.
Please check to see if any /etc/init.d scripts or apps are interfering with your settings If you're on ViperXL, make sure your settings in Venom Tweaks are the same as the ones in /etc/elementalx.conf (for example, sweep2wake settings)
Sweep2Wake
Sweep2wake allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep). There are now options for sweep2wake/sweep2sleep, sweep2sleep only, and disabled. If you use ViperXL, make sure to enable sweep2wake in Venom Tweaks. Note that in Venom Tweaks, the sweep2sleep only option can be selected by choosing Enable (no buttons backlight).
DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the capacitive buttons.
/sys/android_key/doubletap2wake
0=disabled
1=enable doubletap2wake using back button
2=enable doubletap2wake using home button
3=enable doubletap2wake using recent apps button
Pocket Detection
Pocket detection protects against accidental wakes while S2W or DT2W are enabled and the phone is in your pocket. Pocket detection uses the proximity sensor. This is disabled by default. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/android_key/pocket_detect
0=disabled
1=enable pocket detection
Button Light Notification
With Button Light Notification (BLN), the capacitive buttons will blink on and off when you have a new notification. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/class/leds/button-backlight/bln
0 = disabled
1 = BLN enabled
-
Grazie ho fatto comunque ho notato che è meno fluido il telefono rispetto a quando avevo solo la source col kernel stock. Possibile?