[KERNEL][5.x.x| 4..x.x][CM/AOSP rom] AGNI pure CM

ULTIMA RELEASE PER CM12 e derivate: AGNi pureCM 4.4.7
ULTIMA RELEASE PER CM10, CM11 e derivate: AGNi pureCM v2.9.3




DOWNLOADS

AGNi Kernel - xda-developers DevDB


Questo kernel è compatibile con tutte le ROM AOSP (4.x.x e 5.x.x in base alle versioni) disponibili per questo dispositivo, e in particolare supporta la CyanogenMod 10, 11 e 12 e tutte le Rom derivate da queste.


THREAD UFFICIALE XDA

[KERNEL][AGNi][CM] 25-01-2015 AGNi pureCM v2… | Samsung Galaxy Note II GT-N7100, N7105 | XDA Forums


ISTRUZIONI PER IL FLASH

-Scarica il Kernel
-Fai un Nandroid Backup prima di eseguire il flash
-Puoi facoltativamente svuotare la cartella /system/etc/init.d (se presente e se sai ciò che rimuovi, principalmente script lasciati dai vecchi kernel)
-Fai un wipe cache/dalvik
-Flasha il Kernel via recovery
-Riavvia il sistema e NON TOCCARE NULLA PER 2-3 MINUTI !
-Usa l'app Agni Control per settare il kernel


CREDITS

Contributors
psndna88
Source Code: https://github.com/psndna88/AGNI-pureCM

Kernel Special Features: Based on Cyanogenmod smdk4x12 Sources, upstreamed to 3.0.101 with selected picked mods/patches to be near to stock as possible.

Version Information
Status: Stable

Created 2014-01-18
Last Updated 2015-10-25

Thanks to
CM TEAM
[ADI & TEAM]
andreilux
AndiP for Boeffla App and other works
Yank555 for support


TOOL PER LA MODIFICA DEL FILESYSTEM (PER UTENTI AVANZATI)

F2FS Format tools : LINK
EXT4 Format tools : LINK
WARNING: Formating /data with above format tools will wipe your entire internal storage in a single shot, so backup first

FEATURES E CHANGELOG versione per CM12 (AGNi pureCM 4.4.7)

Spoiler:

CPU GOVERNORS: conservative, ondemand, powersave, interactive, performance, userspace, lulzactive, lulzactiveq, pegasusq, zzmoove (since v2.3.1) I/O GOVERNORS: deadline, cfq, row, sio (additional V(R) & BFQ v5r1 I/O schedulers since v2.3) default cpu governor: lulzactiveq default I/O governor: row NTFS R/W kernel support CIFS & NFS Network FileSystems swap support enabled KSM enabled cleancache enabled automatic efs backup on /data/media/psn-efs-backup scoobydoo sound implemented (replaced by boeffla sound v1.6 since v2.3) 512MB Zram with zcache Zram with SNAPPY compression as first swap priority (Google SNAPPY-v3 in v2.3) (LZ4 since v2.3.1) (LOW CPU LOAD FOR COMPRESSION of ram memory blocks with little loss of compression ratio compared to default LZO compression) uses my compiled busybox (v1.22) to support swap device priorities kernel uses LZMA compression 25-01-2015 Update v4.3.7(ANYROM+AROMA) (Lollypop-NewBuilds) Changelog disable the extra kernel debugging | remove power supply,battery,charging updates from SAMSUNG OSRC I9305 Update (SOD fix) | mali r3p2: IGNORE MALI R3P2 rel 3 blobs API COMPATIBILITY CHECK - This disables the MALI API checking and assumes compatibility, thereby not resorting to black screen - now any r3p2 blobs are supported | samsung-battery : Implement a newer "Charge Level Interface v2" (andip71) | Touch to wake: Add option to keep touch-to-wake active all the time when connected to charger (andip71) | ignored "charger_softreg" wakeLocks for MAX77693 charger | kernel version bumped to v4.3.7 as it shares same stock base with cm specific differences[*] 16-03-2015 Update v4.3.8 Modifications to Charge Level Interface v2, samsung battery and max77693_charger (fixed 2000mA charging) | mdm: Update mdm | mm/ashmem.c: fixed a typo introduced by samsung | CIFS: force into modules | Integrate MDNIE CONTROL for digital brightness support (you need to play with tunables manually in /sys/class/misc/mdnie for now) | Update kexec-hardboot | Offline charging bug fix for old bootloader and KK Stock by scholbert@xda 29-03-2015 Update v4.3.9 Revert "MDNIE CONTROL modifications" for now | Backport random driver from Linux 3.19+ | Changes from SHV-E210S_KK_Opensource_Update2.zip | Revert support in fs/ for "mark_buffer_dirty_inode_sync" | Again cleanly Implement kexec-hardboot | pegasusqpluso set as default in AGNi Control 27-04-2015 Update v4.4.0 REUPLOADED N7100 any CM12+ based on stock kernel sources Revert: "cpu_pm: Add cpu power management notifiers" | MobiCore: skip initializations with AOSP ROMs (arter97) | lzo: check for length overrun in variable length encoding. | block: disable add_random | selinux: allow unknown by default | selinux: always grant access | fs/f2fs: update (arter97) | Disable CONFIG_BATTERY_MAX77693_CHARGER_SKIP_WAKELOCKS | fimc-is: Adjust to CM/Omnirom implementation | mali: fix Kconfig warning messages | mfc5x: Adjust to CM/Omnirom implementation | Input: Send events one packet at a time | Power/Battery/Charger: Bring back to N7100 preNI1 base 29-04-2015 Update v4.4.1 drivers/usb/gadget: add required modifications for CM builds | Accumulative squashed fixes + changes from SAMSUNG OSRC I9305 Update | Revised AGNi Control profiles v2.0 SHOULD KILL ANY SOD. 04-05-2015 Update v4.4.2 Changelog: Revert "freezer: shorten freezer sleep time using exponential backoff" | net/bluetooth/hci_conn.c : fix compiler warnings | sound/soc/codecs: implement proper way of on-the-go switching between Boeffla Sound and Wolfson sound control 09-05-2015 Update v4.4.3 sound/soc/codecs: increase wolfson sound default earphone level to 57 | USB keyboard/mouse role support: fix MacOS compatibility | Revert lot of commits | Switched to GCC 4.8 google prebuilt toolchain 12-05-2015 Update v4.4.4 (Stock-sources based) Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits | smdk4412: reboot bootloader boots into download mode | mfc5x-cm: for CM implementation to fix video recording issue 12-05-2015 Update v4.4.4(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds) update wm8994, Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits 03-06-2015 Update v4.4.5 (Stock-sources based) 03-06-2015 Update v4.4.5(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds) Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option. Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented. I had frequent SOD's with smartassV2 governor on pureCM, be informed. 18-10-2015 Update v4.4.6 (Stock-sources based) Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | dm-crypt: allow trailing "0" argument for compat with Android 5.1.1 vold | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE 18-10-2015 Update v4.4.6(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds) Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE 25-10-2015 Update v4.4.7 (Stock-sources based) accessory: fix false disconnect due to a signal sent to the reading process | pstore: selinux: add security in-core xattr support for rootfs, pstore and debugfs | tcp: add a sysctl to config the tcp_default_init_rwnd | misc: uidstat: avoid create_stat() race and blockage | bcmdhd wifi modifications | Staging/Android/binder modifications | drivers: video: samsung: implement vsync sysfs handling | s3cfb: fix S3CFB_SET_VSYNC_INT ioctl | squashed updates/changes for cgroup.c futex.c bio.c | AGNi control's installation of every boot issue fixed | Zzmoove-zanezam-optimised as new default governor GOT 30300 Antutu score on Ivan's rom with default AGNi settings

Riservato per aggiunte future ;)

Aggiunto al cafè point ;)

Scusate, vorrei chiedervi un consiglio, potete dirmi come dovrei configurare questo kernel sulla resurrection remix per consumare meno batteria?
Grazie in anticipo

Domanda, come si comporta a consumi? C'è un modo per avere una rom based 4.4.2? Odio lollipop e vorrei downgradare

io mi sto trovando bene. ora sto testando con il profilo di risparmio energetico e mantiene una buona fluidità. certo se giochi spesso conviene mantenersi sul profilo "normale" o ottimizzato.

03-06-2015 Update v4.4.5 (Stock-sources based)
03-06-2015 Update v4.4.5(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)

Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option.
Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented.
I had frequent SOD's with smartassV2 governor on pureCM, be informed.

è compatibile con miui v6?poichè non so che versione sia la miui..

Quote:

---

Originariamente inviato da bubugaga

è compatibile con miui v6?poichè non so che versione sia la miui..

---

Intendi questa? http://forum.xda-developers.com/gala...r-ota-t3097023

Essendo CM-Based si, dovrebbe esserlo.


Su questa però no, essendo stockbased: http://forum.xda-developers.com/gala...based-t3130842

Quote:

---

Originariamente inviato da NiloGlock

Intendi questa? http://forum.xda-developers.com/gala...r-ota-t3097023

Essendo CM-Based si, dovrebbe esserlo.


Su questa però no, essendo stockbased: http://forum.xda-developers.com/gala...based-t3130842

---

sisi,intendevo quella,ma per passare da resurrection remix 5.1.1 a questa bastano i wipe giusto?

18-10-2015 Update v4.4.6 (Stock-sources based)
Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | dm-crypt: allow trailing "0" argument for compat with Android 5.1.1 vold | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE

18-10-2015 Update v4.4.6(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE

25-10-2015 Update v4.4.7 (Stock-sources based)
accessory: fix false disconnect due to a signal sent to the reading process | pstore: selinux: add security in-core xattr support for rootfs, pstore and debugfs | tcp: add a sysctl to config the tcp_default_init_rwnd | misc: uidstat: avoid create_stat() race and blockage | bcmdhd wifi modifications | Staging/Android/binder modifications | drivers: video: samsung: implement vsync sysfs handling | s3cfb: fix S3CFB_SET_VSYNC_INT ioctl | squashed updates/changes for cgroup.c futex.c bio.c | AGNi control's installation of every boot issue fixed | Zzmoove-zanezam-optimised as new default governor

GOT 30300 Antutu score on Ivan's rom with default AGNi settings

Consigli sui settaggi?