CERCA
PER MODELLO
FullScreen Chatbox! :)

Utente del giorno: 4eyes81 con ben 1 Thanks ricevuti nelle ultime 24 ore
Utente della settimana: elmegio con ben 7 Thanks ricevuti negli ultimi sette giorni
Utente del mese: bluemask con ben 43 Thanks ricevuti nell'ultimo mese

Pagina 1 di 597 1231151101501 ... ultimoultimo
Ultima pagina
Visualizzazione dei risultati da 1 a 10 su 5965
Discussione:

[KERNEL][ICS/JB][ExTweaks][All-in-1kernel][DualBoot][Eargasm] SiyahKernel v4.x.x

Se questa discussione ti è stata utile, ti preghiamo di lasciare un messaggio di feedback in modo che possa essere preziosa in futuro anche per altri utenti come te!
  1. #1
    Androidiano VIP L'avatar di luca_vivi


    Registrato dal
    Nov 2011
    Località
    Arosio (Como)
    Messaggi
    3,672

    Ringraziamenti
    322
    Ringraziato 462 volte in 355 Posts
    Predefinito

    [KERNEL][ICS/JB][ExTweaks][All-in-1kernel][DualBoot][Eargasm] SiyahKernel v4.x.x

    Quote Originariamente inviato da JacOcaJ Visualizza il messaggio
    ATTENZIONE:
    Se con il siyah si fa un ripristino dati di fabbrica da menù impostazioni il telefono si blocca e non si riesce a fare più niente... Entra solo in download mode e si può solo flashare un firmware... Niente di irreparabile, basta flashare un firmware.

    L'altro problema è delle app Samsung, essendo un pacchetto che si estrae ed istalla autonomamente alla prima configurazione, con il siyah se si fa il wipe data si cancellano; polaris office, per esempio, non lo puoi trovare nei market, quindi devi riistallare la rom.

    RICORDATE COMUNQUE CHE CON IL SIYAH NON CI SONO PROBLEMI DI HARDBRICK


    Se comunque avete bisogno di fare un ripristino dati di fabbrica o un wipe data ma non volete perdere le samsung apps allora potete mettere un altro kernel (SpeedWizz, Phenomenal, DM Dharam Maniar....) fare le operazioni che volete e poi rimontare il Siyah




    Ecco a voi il miglior kernel per ICS



    Sito ufficiale del team: SiyahKernel for SGS2 | "One kernel to rule them all"

    Forum XDA: [KERNEL][ICS][ExTweaks][All-in-1kernel][DualBoot] SiyahKernel v3.1rc2 - xda-developers

    Ultima RELEASE:

    Quote Originariamente inviato da gokan
    SiyahKernel S2-v4.1.2
    Posted on August 21 2012

    Changelog

    Linux 3.0.40**Linux 3.0.15CWM-Based Touch Recovery v6.0.1.2fixed led timeout not being savednew GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz(Removed in beta4)added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)removed 25MHz and 50MHz CPU stepsfixed led activity on brightness changeExTweaks settings will be reset because of GPU changes. *if you revert back to a previous version make sure you reset ExTweaks settings manually.update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.update beta4 -> beta5gesture support by*Tungstwenty*(sample flashable zip)*here is the XDA thread. some minor fixes in ExTweaks. swappiness set to 90 (effective only if you are using zram or swap). removed battery and performance profile settings during the beta phase (they will be the same as default settings)rc1 -> release:4 gpu steps (100,160,200,266MHz default).gpu boost on touch to prevent UI lags (gpu freq will be set to step2, 160MHz in default set, for one second after you touch the screen).pegasusq behavior modified and tweaked.CWM-based recovery updated to 6.0.1.2.fixed mounting the internal sdcard in recovery. fixed user gamma settings.Tested backup&restore using nandroid dedupe and tar formats (tar format may not be compatible with previous version. make sure you create new backups after you install the kernel).made a small modification in init script to create “.nomedia” files in clockworkmod folders to prevent media scanning on blob folder.update 4.1 -> 4.1.1: fixed the problem with external sdcard in some roms because of forgotten unmount in init script.update 4.1.1 -> 4.1.2: added lulzactiveq (added hotplug logic and some fixes & tweaks, by*robertobsc@XDA). fixed recovery not being usable with 3-button combo. set default backup format to tar in recovery. some other initramfs changes & fixes.

    DOWNLOAD TAR (for Odin) http://www.gokhanmoral.com/public/fi...-s2-v4.1.2.tar

    DOWNLOAD ZIP (for CWM Recovery) http://www.gokhanmoral.com/public/fi...v4.1.2-CWM.zip


    Quote Originariamente inviato da gokan
    SiyahKernel S2-v4.1beta6

    Posted on August 9, 2012
    Changelog:

    Linux 3.0.40
    CWM-Based Touch Recovery v6.0.1.1
    fixed led timeout not being saved
    new GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz (Removed in beta4)
    added one more GPU step, we now have 4 GPU steps with 108, 160, 266, 330MHz defaults. (Removed in beta4)
    added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)
    fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)
    removed 25MHz and 50MHz CPU steps
    fixed led activity on brightness change
    ExTweaks settings will be reset because of GPU changes. if you revert back to a previous version make sure you reset ExTweaks settings manually.
    update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.
    update beta4 -> beta5: gesture support by Tungstwenty (sample flashable zip) here is the XDA thread. some minor fixes in ExTweaks. swappiness set to 90 (effective only if you are using zram or swap). removed battery and performance profile settings during the beta phase (they will be the same as default settings)
    update beta5 -> beta6: removed additional gpu steps and new frequencies
    Download: http://d-h.st/users/siyah/testing
    Quote Originariamente inviato da gokan
    SiyahKernel S2-v4.0.1
    Posted on August 5, 2012
    Changelog:

    based on update7 sources
    supports Samsung 4.0.3/4.0.4 (no camera problem), CM9, CM10 and MIUI
    all the changes from v3.5.2 are applied
    no CAP_ERASE, no hardbrick
    fixed CM10 led behavior
    fixed led_fadeout behavior
    fixed autorotation problem with CM10 and 4.0.3 ROMs
    enabled swap and zram options in config. enabled zram as default with 150MB swap. you can disable it in extweaks.
    CWM-based Touch Recovery v6.0.1.1 Postponed
    Update v4.0 -> v4.0.1: some changes in initramfs to fix boot problems with some ROMs.
    Download: Dev-Host - The Ultimate Free File Hosting / File Sharing Service
    PER INSTALLARE: se si arriva da altri kernel prima si flasha da recovery lo script cleaner e dopo il kernel!

    2.6.5

    http://db.tt/cuI0PGxi

    Applicazione ufficiale Siyah:

    http://db.tt/D0h6NXVy









    Features:
    All-in-1kernel because it supports CM9, Samsung and MIUI ROMs with a single kernel image.
    Dual booting support for all supported ROM types. See droidphile's post for Dual Booting FAQ
    Custom CWM touch recovery with swipe gestures
    8 freq steps (100MHz to 1600MHz)
    3-step GPU frequency levels. Samsung default is 160-267 whereas SiyahKernel default is 160-200-267 which saves power without sacrificing performance.
    Auto-root. You can also remove root via ExTweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
    CPU Overclock/Undervolt support (we have two interfaces for that. both of them are defacto standard)
    Tweakable vitalij's value (set to 5 as default)
    Fixed fuelalert wakelocks
    You can completely disable android logger using ExTweaks app
    Faster charging for misc and USB modes. There are 3 modes (AC, Misc, USB) and normally last two of them support only slow charging. You can have charging speed of AC by increasing it (especially user while charging in car or using USB port)
    Cpu governor optimizations
    Gpu voltage, clock and stepcount interfaces (GPU Overclock/Undervolt)
    Tegrak's touchmove support.
    Brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio's voodoo display app when it is released. brightness modification will only change auto-brightness response.
    BLN support both for Samsung and CM9 ROMs (use BLNControl app from the market to enable it)
    Better touch sensitivity (especially while charging)
    Available CPU Governors: Ondemand (default), Pegasusg (new hotplug aware governor from Samsung), Lulzactive, SmartassV2, Interactive and Conservative governors added
    CIFS
    Available I/O schedulers: CFQ (default), noop, Deadline, SIO, V(R)
    J4FS as module
    ARM topology support (SCHED_MC)
    Automatic EFS Backup
    Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
    Voodoo louder support (already default in all kernels but people ask it if it is supported)
    USB Mass Storage mode is working in CWM Touch Recovery
    built-in profile support with default, battery and performance presets (you can change them in CWM Recovery). Even using everything default will save you a lot of battery juice.
    Almost everything is configurable such as scheduler features, hotplug thresholds, GPU frequencies, voltages, arm topology modes... and they are configurable via simple and free ExTweaks App from Google Play
    More to come...

    Known Problems:
    no known problems yet
    Thanks To:
    Chainfire, Codeworkx, Arighi, Tegrak, Vitalij, Entropy512, Netarchy, koush, Creams, sk8erwitskil, hardcore, Pikachu,
    This part will be expanded. most of the patches I applied are coded by someone else. please remind me if I forget to give credits to anybody..
    Changelog:

    See SiyahKernel for SGS2 | "One kernel to rule them all" for changelog.

    You can find the sources at http://github.com/gokhanmoral/siyahkernel3
    and initramfs at http://github.com/gokhanmoral/initramfs3
    Todo:
    these are my future plans and some of them are dreams only...
    BLN without wakelocks
    implement progress bar in cloning process (dual-booting related)
    fix USB OTG for mouse&keyboard
    implement nandroid backup/restore for the second rom (dual booting)
    lower the lowest brightness
    remove 100mhz
    remove 1600mhz
    modify pegasusq and make a pegasusd
    add optional teamwin recovery
    add enable/disable bln checkbox to extweaks
    fix ntfs-3g and automounting issues
    implement dynamic freq table support with dynamic step size
    a setting in extweaks to adjust the vibration intensity
    ...



    NON SONO, IL RESPONSABILE SE VI BRIKKATE IL TELEFONO, NE' TANTO MENO IL BLOG "ANDROIDIANI", SIAMO TUTTI MAGGIORENNI!.
    Immagini allegate
    Ultima modifica di Anna; 01-09-12 alle 22:38

    LeEco Le MAX 2
    Rom: AICP 8.1.0
    Kernel:

  2. I seguenti 28 Utenti hanno ringraziato luca_vivi per il post:

    BadBoyRM (02-08-12),cel400 (26-05-12),corbinus (13-04-12),criptas (13-04-12),crisgen (13-04-12),cybern (14-07-12),federico54 (04-06-12),forgiaro (30-05-12),fpego (14-05-12),Gasato94 (26-07-12),gioleone0541 (31-08-12),hiace (19-04-12),illuminato67 (11-05-12),jcoax (16-08-12),kitomobile (16-08-12),Leo2589 (15-06-12),ludorexmundi (13-04-12),malu88 (15-08-12),Marvelix (17-08-12),masterdoo (14-08-12),myrianto (13-04-12),ram918 (14-04-12),robo25 (03-08-12),robygt (25-08-12),salvopetrucci (14-04-12),sportman (15-04-12),zui (07-08-12)

  3.  
  4. #2
    Androidiano VIP L'avatar di luca_vivi


    Registrato dal
    Nov 2011
    Località
    Arosio (Como)
    Messaggi
    3,672

    Ringraziamenti
    322
    Ringraziato 462 volte in 355 Posts
    Predefinito

    Questa è una guida per il dualboot:
    Guida per il Flash di una ROM come "secondary"

    Questa è una traduzione per il dualboot: Grazie MYRIANTO

    "Requisisti: kernel siyah3.1 rc e rom che lo supportano

    -Per fare diventare la vostra rom attuale come secondary e poter così installare una nuova rom che diventerà primary.

    Entrare in recovery
    troverete una nuova opzione disponibile in CWM per la clonazione della vostra primary ROM come secondary rom(dual-boot option>clone primary rom to secondary)


    -Se si desidera avere un nuova ROM come secondary ROM, seguire questi passi:

    entrare in recovery
    fare un nandbackup della vostra attuale ROM .
    wipe cache, data, dalvik cache
    installare nuova ROM
    Boot ROM e personalizzazioni
    Non dimenticate di reflash SiyahKernel se la ROM installa un kernel diverso
    entrare in recovery
    clonare la vostra rom come secondary rom (dual-boot>clone prymary rom to secondary)
    Ripristinare backup nandroid fatto all’inizio.

    ricorda che non potri flashare da CWM pacchetti aggiuntivi per la secondary rom.
    Pertanto, è importante personalizzare bene prima di fare il clone a secondary rom.
    dopo aver creato la secondary rom, ad ogni riavvio avrai 3 secondi per premere il tasto home ed avviare la secondary rom

    Alcune note di dualbooting:

    se non fate la clonazione non sarà richiesto di avviare la seconda rom.
    Si potrebbe aver bisogno di reflash questo kernel dopo un ripristino nandroid se il vostro backup è creato con un altro kernel.
    Vi è barra di avanzamento durante il processo di clonazione.
    Ci sono alcuni controlli mancanti. Per esempio, se non avete abbastanza spazio nella vostra sdcard interna(avete bisogno 2,1 GB liberi).
    Lo swap tra le rom serve per portare la secondary come primary e la primary come secondary in un unico comando per poter così aggiornare con pacchetti zip da recovery la rom che era secondary in partenza"

    PER INSTALLARE UNA NUOVA ROM DIRETTAMENTE SULLA SECOND ROM :

    -installare il syahkernel dalla versione 3.2b8 in poi*
    -come si può leggere dal changelog prima di installare la second rom bisogna fare un format di data e cache a cui si accede da "mount and storage" (no advance Nihil )
    -Procedere,una volta terminate le operazioni sopra descritte, ad installare lo zip della rom tramite i comodi comandi nella sezione dual boot options
    ECCO DESCRITTA DUNQUE LA MANIERA PIU COMODA E VELOCE PER INSTALLARE LA SECONDA ROM SENZA DOVER FARE IL LENTISSIMO SWIPE TRA PRIMA E SECONDA ROM!!!
    METODO APPENA TESTATO E FUNZIONANTE


    SIYAH KERNEL
    Thread | App - ExTweaks - settaggi



    ExTweaks è una semplice applicazione che permette di tenere sotto controllo le impostazioni avanzate del kernel. Nato inizialmente per il kernel Siyah (2.6.13+) ma adesso è stato integrato e riadattato anche in altri kernel come NEAK (NEAK configurator) e Fecalty.

    GUIDA PER ICS NEL SECONDO POST

    Da qui potete scaricare l'applicazione (ExTweaks): https://play.google.com/store/apps/d...n.extweaks.app

    x NEAK: https://play.google.com/store/apps/d...K_Configurator

    *nel secondo post trovate dei settaggi stabili testati da me
    **nel terzo post trovate la configurazione Morpheus

    Questa è una mini guida per impararne a conoscere le funzioni principali con il kernel Siyah.


    CPU: Controlla la CPU

    1) Hot-Plug Mode: Il processore ci mette pochi istanti per passare da single a dual core quindi conviene usare entrambi i core.

    2) loadl, loadh: Valore in percentuale più basso per passare dal dual core al single e valore più alto per passare dal single al dual. Consigliati: 50 85

    3) loadl_scroff, loadh_scroff: Come prima ma abbinato allo schermo spento. Utile per l'utilizzo di bluetooth, wifi/3g downloads, ascolto della musica. Consigliati: 70 100

    4) rate, rate_cpuon, rate_scroff: Valore misurato in jiffies. Corrispondono rispettivamente al tempo che il processore deve metterci per passare da una frequenza all'altra, per accendere il secondo core e per le frequenze in screen off. Consigliati: 200 500 1100

    5) freq_cpu1on: freq minima per accendere il secondo core. Consigliati: 500mhz se si usa come frequenza massima di CPU 1000mhz; 800mhz se si usa 1200mhz

    6) Idle Mode, Sched_mc: Lasciare questi valori invariati cioè 3 e 0.

    7) smooth_target, smooth_offset, smooth_step: Controlla il governor facendo in modo che con valori più alti, salga più lentamente alle frequenze superiori. Funziona solo con governor ondemand e conservative. Per non condizionare le attività del governor impostare questi valori a 0. Consigliati: 1 1 1

    GPU: Controlla la gpu

    1) GPU Frequency Steps: 3 Steps per la frequenza di GPU. Maggiori sono i valori, maggiori saranno i frames. Consigliato: 160 200 267. Batteria: 100 160 200; Performance:200 267 400

    2) GPU Voltages: Voltaggi della GPU. è importante considerare gli step che si sono scelti. Ovviamente se si sono scelti steps Performance si useranno voltaggi più alti altrimenti si può scendere ma senza esagerare altrimenti si avranno crash durante l'uso di giochi. Consigliati: 850 950 1000

    3) GPU UP and DOWN Thresholds: Valori in percentuale minimi e massimi per passare da uno step all'altro. Dipende dai valori che si sono scelti. Consigliati: 80 40 85 55

    4) GPU Stay Counts: Numero di cicli che la gpu fa su un singolo step. Anche qui dipende dagli steps che si sono scelti quindi consiglio di lasciare in ogni caso 1 1 1

    SCREEN: Controlla lo schermo

    1) Touch Move Sensitivity: controlla la sensibilità dello schermo. Consigliato: 7

    2) min_bl, min_gamma, max_gamma: controlla la luminosità. Consigliato: 30 0 20 per una luminosità inferiore(minor consumo di batteria); 20 1 24 per una luminosità maggiore.

    MISC: Governor, Scheduler, ecc

    1) Backup EFS: Backup di EFS per salvare l'IMEI.

    2) Android Logger: Attiva/disattiva logging

    3) Default Ondemand Suspend Frequency: massima frequenza da schermo spento.

    4) Default CPU Governor: imposta il governor (differenze tra i governor:https://www.androidiani.com/forum/mo...ifferenze.html)

    5) Default I/O Scheduler: imposta lo scheduler. Io preferisco sio.(guida scheduler:https://www.androidiani.com/forum/mo....php?p=1327208)

    6) Charge Current: Intensità di corrente per caricare il terminale. Consigliato: 1 o 2

    7) Reset Fuel Gauge Chip: da usare se avete dei valori anomali della batteria durante l'utilizzo.

    Qui trovate i thread di XDA dei vari kernel sopraelencati:
    Siyah: [KERNEL][ExTweaks] SiyahKernel v2.6.14 - "One kernel to rule them all" - xda-developers
    NEAK:[KERNEL][18.03.12][APP/PRO][OTA] N.E.A.K. Kernel for I9100 - The last one!! (v1.4.2x) - xda-developers
    Fecalty: [Kernel][ CWM ]Fecality I9100 3/7/2012 (GPU Voltage Fix) - xda-developers

    Con questa guida e un po' di esperienza diventerete dei veri e propri esperti per trovare la vostra migliore configurazione! Buon modding a tutti...



    vecchia discussione


    https://www.androidiani.com/forum/mo...ml#post1392514
    Ultima modifica di Anna; 26-06-12 alle 10:50

    LeEco Le MAX 2
    Rom: AICP 8.1.0
    Kernel:

  5. I seguenti 11 Utenti hanno ringraziato luca_vivi per il post:

    BadBoyRM (17-08-12),illuminato67 (03-08-12),jcoax (16-08-12),masterdoo (14-08-12),micca (01-09-12),mlazzarotto (29-08-12),myrianto (14-04-12),ram918 (14-04-12),salvopetrucci (19-05-12),seeerg (23-06-12),zui (02-09-12)

  6. #3
    Senior Droid


    Registrato dal
    Jan 2012
    Messaggi
    532
    Smartphone
    G2 G4

    Ringraziamenti
    73
    Ringraziato 71 volte in 63 Posts
    Predefinito

    Ottimo! Seguo con interesse!

    Inviato dal mio GT-I9100 con Tapatalk 2

  7. #4
    Administrator L'avatar di Anna


    Registrato dal
    Jun 2011
    Messaggi
    36,924

    Ringraziamenti
    1,959
    Ringraziato 14,518 volte in 9,621 Posts
    Predefinito

    Inviato dal mio GT i9100 con ROM AOKP BEZKE
    Sono un clown, e faccio collezione di attimi ....


    Sto guidando. (cit. DIEGUCCIO)

  8. #5
    Androidiano VIP


    Registrato dal
    Jun 2011
    Località
    robecchetto con induno
    Messaggi
    1,183

    Ringraziamenti
    207
    Ringraziato 52 volte in 45 Posts
    Predefinito

    Scusate l'ignoranza ma dual boot vuol dire che posso installare due rom contemporaneamente e scegliere all'avvio quale usare?


    Inviato dal mio GT-I9100 usando Androidiani App

  9. #6
    Androidiano VIP


    Registrato dal
    Dec 2011
    Messaggi
    1,321

    Ringraziamenti
    426
    Ringraziato 74 volte in 71 Posts
    Predefinito

    Ragazzi c'é qualcuno con l'ultimo Siyah e la Cyano9? Mi può postare i suoi settaggi? Voglio trovare un buon compromesso fluidità/batteria.

    Inviato dal mio GT-I9100 usando Tapatalk

  10. #7
    Androidiano VIP L'avatar di luca_vivi


    Registrato dal
    Nov 2011
    Località
    Arosio (Como)
    Messaggi
    3,672

    Ringraziamenti
    322
    Ringraziato 462 volte in 355 Posts
    Predefinito

    Quote Originariamente inviato da dade82 Visualizza il messaggio
    scusate l'ignoranza ma dual boot vuol dire che posso installare due rom contemporaneamente e scegliere all'avvio quale usare?


    Inviato dal mio gt-i9100 usando androidiani app
    si vuol dire proprio quello ed il siyah attualmente è l'unico kernel che lo consente

    LeEco Le MAX 2
    Rom: AICP 8.1.0
    Kernel:

  11. #8
    Androidiano VIP L'avatar di luca_vivi


    Registrato dal
    Nov 2011
    Località
    Arosio (Como)
    Messaggi
    3,672

    Ringraziamenti
    322
    Ringraziato 462 volte in 355 Posts
    Predefinito

    Quote Originariamente inviato da iEzZo Visualizza il messaggio
    Ragazzi c'é qualcuno con l'ultimo Siyah e la Cyano9? Mi può postare i suoi settaggi? Voglio trovare un buon compromesso fluidità/batteria.

    Inviato dal mio GT-I9100 usando Tapatalk
    primA DI TUTTO HAI PROVATO DA RECOVERY A SETTARE DI DEFAULT IL PROFILO BATTERY?

    LeEco Le MAX 2
    Rom: AICP 8.1.0
    Kernel:

  12. #9
    Androidiano VIP


    Registrato dal
    Jun 2011
    Località
    robecchetto con induno
    Messaggi
    1,183

    Ringraziamenti
    207
    Ringraziato 52 volte in 45 Posts
    Predefinito

    Quote Originariamente inviato da luca_vivi
    Originariamente inviato da dade82
    scusate l'ignoranza ma dual boot vuol dire che posso installare due rom contemporaneamente e scegliere all'avvio quale usare?


    Inviato dal mio gt-i9100 usando androidiani app
    si vuol dire proprio quello ed il siyah attualmente è l'unico kernel che lo consente

    La cosa e molto interessante! Le due rom immagino che devono essere entrambe ics, giusto? E piu complicata la procedura? C'e qualche svantaggio?


    Inviato dal mio GT-I9100 usando Androidiani App

  13. #10
    Senior Droid L'avatar di criptas


    Registrato dal
    Feb 2011
    Località
    Selargius
    Messaggi
    886
    Smartphone
    Sg4, Sg2,

    Ringraziamenti
    85
    Ringraziato 97 volte in 84 Posts
    Predefinito

    Grande Luca grazie! Ho messo anche la rc2 e va benissimo!!!

Pagina 1 di 597 1231151101501 ... ultimoultimo
Ultima pagina

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire risposte
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Torna su
Privacy Policy