ho provato jodin ho fatto partire S3 in download mode jodin a rievato perfettamente il telefono poi ho provato a fleshare la recovery https://www.androidiani.com/forum/mo...-gt-i9300.htmlQuote:
Originariamente inviato da mattylux
seguendo questa guida, tanto jodin funziona come odin quindi i procedimenti, cf-autoroot per S3 funzionano uguali?? se non sbaglio pero quando faccio partire jodin si riavvia il cellulare e fine cosi non flesha nulla....
Galaxy s3 come rootare con archlinux
Visualizzazione stampabile
-
04-12-14, 10:30mattylux
-
04-12-14, 19:11edosossiHai installato gli android usb driver? Se non ricordo male è una delle prime cose trattate nella guida. Dovrebbe essere sufficiente collegare il telefono a Jodin in modalità download: dovrebbe provvedere automaticamente a scaricare ed installare i driver.Quote:
Originariamente inviato da mattylux
-
04-12-14, 21:17mattylux
Si infatti quando cinnetto il cell al pc jodin mi dice connect device ho provato a fleshare la recovery e partito mi chiedeva di scaricare il pit dell s3 ho riavviato il cell riconnesso con jodin fato niovente start e partito a fatto vedete una solita serie di sfringhe ol cell si e riavviato e nulla..
-
04-12-14, 21:18mattylux
Non e che devo sbloccate il bootloader? Poi flrshare la recovery?
-
05-12-14, 00:16edosossi
No, il GT-I9300 non ha il bootloader bloccato
-
05-12-14, 09:13mattylux
Scusami non lo sapevo stamattina provo con heimdell
-
05-12-14, 12:18mattylux
niente da fare mi dice che il pit non va bene
udo heimdall flash --RECOVERY recovery-clockwork-touch-6.0.0.7-i9300.imgcodice:[unitadistrada@unitadistrada galaxy S3]$ sudo heimdall print-pit
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Entry Count: 16
Unknown 1: 1598902083
Unknown 2: 844251476
Unknown 3: 30797
Unknown 4: 0
Unknown 5: 0
Unknown 6: 0
Unknown 7: 0
Unknown 8: 0
--- Entry #0 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 80
Attributes: 2 (STL Read-Only)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 0
Partition Block Count: 1734
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOTLOADER
Flash Filename: sboot.bin
FOTA Filename:
--- Entry #1 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 81
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 1734
Partition Block Count: 312
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: TZSW
Flash Filename: tz.img
FOTA Filename:
--- Entry #2 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 70
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 34
Partition Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash Filename: mx.pit
FOTA Filename:
--- Entry #3 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 71
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 50
Partition Block Count: 2048
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5HDR
Flash Filename: md5.img
FOTA Filename:
--- Entry #4 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 8192
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA0
Flash Filename: -
FOTA Filename:
--- Entry #5 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 2
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 16384
Partition Block Count: 8192
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOTA1
Flash Filename: -
FOTA Filename:
--- Entry #6 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 3
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 24576
Partition Block Count: 40960
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: EFS
Flash Filename: efs.img
FOTA Filename:
--- Entry #7 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 4
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 65536
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PARAM
Flash Filename: param.bin
FOTA Filename:
--- Entry #8 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 5
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 81920
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: BOOT
Flash Filename: boot.img
FOTA Filename:
--- Entry #9 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 6
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 98304
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RECOVERY
Flash Filename: recovery.img
FOTA Filename:
--- Entry #10 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 7
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 114688
Partition Block Count: 65536
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: RADIO
Flash Filename: modem.bin
FOTA Filename:
--- Entry #11 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 8
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 180224
Partition Block Count: 2097152
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: CACHE
Flash Filename: cache.img
FOTA Filename:
--- Entry #12 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 9
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 2277376
Partition Block Count: 3145728
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SYSTEM
Flash Filename: system.img
FOTA Filename:
--- Entry #13 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 10
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 5423104
Partition Block Count: 1146880
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: HIDDEN
Flash Filename: hidden.img
FOTA Filename:
--- Entry #14 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 11
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 6569984
Partition Block Count: 16384
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: OTA
Flash Filename: -
FOTA Filename:
--- Entry #15 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 12
Attributes: 5 (Read/Write)
Update Attributes: 5 (FOTA)
Partition Block Size/Offset: 6586368
Partition Block Count: 0
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: USERDATA
Flash Filename: userdata.img
FOTA Filename: remained
Ending session...
Rebooting device...
Releasing device interface...
Re-attaching kernel driver...
[unitadistrada@unitadistrada galaxy S3]$ sudo heimdall detect
Device detected
[unitadistrada@unitadistrada galaxy S3]$ sudo heimdall flash --recovery recovery-clockwork-touch-6.0.0.7-i9300.img --cache cache.img
ERROR: Failed to open file "cache.img"
[unitadistrada@unitadistrada galaxy S3]$ sudo heimdall flash --recovery recovery-clockwork-touch-6.0.0.7-i9300.img
[sudo] password for unitadistrada:
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
ERROR: Partition "recovery" does not exist in the specified PIT.
Ending session...
Rebooting device...
Releasing device interface...
Re-attaching kernel driver...
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading RECOVERY
100%
RECOVERY upload successful
Ending session...
Rebooting device...
Releasing device interface...
Re-attaching kernel driver...
pero ho sempre la vecchia recovery non mi ha fatto nulla
Secondo me questo s3 ha qualche blocco magari e il brand della tre che non ku fa fare nulla non e che sono incapace il galazy nexus li rootato in tre secondi qui sonk tre giorni e non ci riesco magari non si puo in questo .. -
05-12-14, 13:24edosossi
Hai ottenuto almeno i privilegi di root? Se sì, potresti provare ad installare la recovery tramite Mobile Odin reperibile da qui
-
05-12-14, 14:01mattylux
No soni riuscito a fare nulla na un modo per rootare il cell senza pc?? direttamente dall s3? E possibole con rom manager?
-
06-12-14, 07:10dieguccioDovresti fare la cortesia di rileggere quello che scrivi, prima di inviare il postQuote:
Originariamente inviato da mattylux
È veramente faticoso capire quello che hai scritto
Per i nuovi firmware non c'èQuote:
Originariamente inviato da mattylux
Ma un amico con Windows? Alla fine servono 5 minuti esatti per fare tutto
