[KERNEL][4.4.x | 4.3 | 4.1.2][Samsung tw rom] AGNI pure stock - OC, ULTRASMOOTH

[diegolandia1981]

Ho la Ketan

Inviato dal mio GT-N7100 usando Androidiani App

[Robyj80]

OK io ho la DN4 con le vecchie release per adesso nessun problema, questa la devo ancora provare, ma sembrano tutte molto simili, quindi non credo di cambiare per adesso..

[8thphloor]

• 30-04-2015 Update v4.4.1
  drivers/usb/gadget: add required modifications for CM builds | Accumulative squashed fixes + changes from SAMSUNG OSRC I9305 Update | Revised AGNi Control profiles v2.0 | Revised AGNi Control CPU-UV v2.0 based on device's detected asv_level

Reuploaded repacked v4.4.1:-

• Revised AGNi Control CPU-UV v2.0 based on device's detected asv_level

Device's asv level is detected (0 to 12) and corresponding cpu-uv scripts for that asv are shown in agni control

Advantages:-

• Each device can be undervolted according to its original optimal chip voltages as categorised by asv_level.
• One can know accurately how much device is capable of undervolting.
• Undervolting not done on basis of arbitrary cpu voltages (EARLIER, CPU UNDERVOLTING WAS DONE ON BASIS OF MY ASV_LEVEL 4 DEVICE).
• Brings similarity in level of undervolting for most users as arbitrary base values from one device of particular ASV will not be stable on other device of different ASV. (this is reason of uv voltages being working good for one, and unstable for another).
• Further, in v2.0 of AGNi Control cpu-uv, the overclocking frequencies (2000,1920,1800,1704 MHz) are not undervolted. Also, low cpu frequencies (200,300 MHz) are not undervolted and stay on device's optimal voltages; this helps reduce chances of SOD's due to cpu dying out of power resulting from low voltages on low frequencies.
• Effectively, cpu frequencies 1600 - 400 MHz can be undervolted from AGNi Control.
• Now AGNi Control shows one's device's ASV_LEVEL in CPU UV area. A device of ASV_LEVEL of 0 means it needs more power (higher voltage) to operate optimally than a device of higher ASV_LEVEL.

Spoiler:

/* ASV0, ASV1, ASV2, ASV3, ASV4, ASV5, ASV6, ASV7, ASV8, ASV9, ASV10, ASV11 ASV12 CPUFREQ */ { 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000, 1450000 }, /* L0 2000MHz */ { 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000, 1425000 }, /* L1 1920MHz */ { 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000 }, /* L2 1800MHz */ { 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1400000, 1387500, 1375000, 1362500, 1350000 }, /* L3 1704MHz */ { 1312500, 1312500, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000, 1237500, 1212500, 1200000, 1187500 }, /* L4 1600MHz */ { 1275000, 1262500, 1262500, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1162500, 1150000, 1137500 }, /* L5 1500MHz */ { 1237500, 1225000, 1225000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1125000, 1112500, 1100000 }, /* L6 1400MHz */ { 1187500, 1175000, 1175000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1075000, 1062500, 1050000 }, /* L7 1300MHz */ { 1150000, 1137500, 1137500, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1037500, 1025000, 1012500 }, /* L8 1200MHz */ { 1112500, 1100000, 1100000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1000000, 987500, 975000 }, /* L9 1100MHz */ { 1087500, 1075000, 1075000, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 975000, 962500, 950000 }, /* L10 1000MHz */ { 1062500, 1050000, 1050000, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, 950000, 937500, 925000 }, /* L11 900MHz */ { 1025000, 1012500, 1012500, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500, 912500, 900000, 887500 }, /* L12 800MHz */ { 1000000, 987500, 987500, 987500, 975000, 962500, 950000, 937500, 925000, 912500, 887500, 887500, 887500 }, /* L13 700MHz */ { 975000, 962500, 962500, 962500, 950000, 937500, 925000, 912500, 900000, 887500, 875000, 875000, 875000 }, /* L14 600MHz */ { 962500, 950000, 950000, 950000, 937500, 925000, 912500, 900000, 887500, 887500, 875000, 875000, 875000 }, /* L15 500MHz */ { 950000, 937500, 937500, 937500, 925000, 912500, 900000, 887500, 887500, 887500, 875000, 875000, 875000 }, /* L16 400MHz */ { 937500, 925000, 925000, 925000, 912500, 900000, 887500, 887500, 887500, 887500, 875000, 875000, 875000 }, /* L17 300MHz */ { 925000, 912500, 912500, 912500, 900000, 887500, 887500, 887500, 887500, 887500, 875000, 875000, 875000 }, /* L18 200MHz*/

[NiloGlock]

Per quando riguarda il backup dell'attuale configurazione eseguibile dall'AGNi Control (utile in quanto ad ogni aggiornamento viene ripristinata quella di default), dove viene salvato di preciso?

[diegolandia1981]

A me su rom ketan a parte il mio solito problema iniziale che a volte se si spegne display non si accende più e devo forzare riavvio. Che risolvo cambiando i vari settaggi che tanto quelli di default non mi piacciono. X il resto come kernel va bene.

Inviato dal mio GT-N7100 usando Androidiani App

[Robyj80]

Io l'ho montata sulla Dn4 per adesso tutto OK ma va come era la 4.3.9 nessun cambiamento...

[Robyj80]

Sono tornato alla 4.3.9. Perche l'ultima versione mi dava problemi di SOD...

[NiloGlock]

Sono tornato alla 4.3.9. Perche l'ultima versione mi dava problemi di SOD...

Hai provato a fare un wipe cache ed un wipe dalvik cache? Dall'app hai modificato qualche parametro in particolare?

[Robyj80]

Hai provato a fare un wipe cache ed un wipe dalvik cache? Dall'app hai modificato qualche parametro in particolare?

Non ho provato, a te funziona?

[Robyj80]

Non ho provato, a te funziona?

Ho provato 30 minuti fa... Non funziona... Tornato alla 4.3.9