codice:
Based on CM 11.0 official version:
https://github.com/CyanogenMod/andro...f/tree/cm-11.0
Linux version: 3.4.0
v35 - 03/09/2014
Added gamma control.
Added GPU UV CONTROL TABLE.
Made i/o read-ahead for Internal sd card configurable by STweaks.
Optimized MM and SCHED.
Update WORKQUEUE to 3.8Y.
Adapted cpu, hotplug governors to new Workqueue.
Tuned intelli_hotplug.
Added support for MIUI v5 KK.
General performace optimizations.
It is absolutely recommended to delete /data/.alucard folder before flashing
v34 - 19/08/2014 (Kernel-Alucard-V2.7.1)
Look at AOSP V2 changelog.
v33 - 14/08/2014 (Kernel-Alucard-V2.7.0d)
Upgraded to Linux v.3.4.103
Optimized interactive governor. Thanks to @neobuddy89.
Fixed MSM MPDecision hotplug. Now all cores work well when system is resumed from suspended state.
Fixed Default MSM Thermal that should work for all hotplug governors and cpu governors.
Compiled with new Linaro 4.9 2014-08 compiled by @dorimanx with optimization flags. It works very well.
v32.1 - 10/08/2014 (Kernel-Alucard-V2.7.0b)
Reverted new MSM GPU drivers imported from official CM Kernel. They caused phone rebooting for someone.
Upgraded to Linux v.3.4.102
Optimized ondemand governor. Thanks to @dorimanx
Optimized alucard governor.
Optimized interactive governor.
Optimzed Intelliplug, alucard_hotplug, MSM_hotplug hotplug governor.
BIG Patch regarding sched, rcu. Overall smothness is improved. Thanks to @neobuddy89, @dorimanx.
Updated CMA, ARM, MM, Random, CPUFREQ, cpuboost, kernel time etc parts. (about 500 commits including sched patch)
Optimized F2FS part. I took last changes from CM kernel.
Implemented new api function to easy configure scaling_min_freq, scaling_max_freq, scaling_governor for each cpu. Now we can set different governor, min/max frequency for each cores using Stweaks.
Imported script updates from Kantjer Ramdisk branch. Thanks to @KANTjer. (OFF TOPIC: I find out that you are swedish.... I worked in Gothenburg last year for six Months. I like sweden :))
General performance increment.
Many changes on Profiles so It is absolutely recommended to delete /data/.alucard folder before flashing new kernel.
PS. Kernel is not compatible with new CM Nightly rom because I need to patch kernel again. I don't know if I have to start from zero again using last cm kernel and patching all my commits.(about 3000 commits) or merge only new parts. It will take alot of time.
v31 - 10/07/2014 (Kernel-Alucard-V2.6.9b)
Upgraded to Linux v.3.4.98
Optimized ondemand governor. Thanks to @dorimanx
Tune Kernel Flags after checking with GccOptimizationTests. It seems to provide 4~7% boost in cpu performance. Thanks to @dorimanx
Enabled config_cma.
Implement optimized percpu variable access.
Optimized mm.
General performance increment.
Compiled with latest Sabermod 4.9.1(compiled by @KANTjer). Thanks to him.
PS. if you come from last 2.6.9 AOSP kernel, you don't need to delete /data/.alucard folder.
v30 - 05/07/2014 (Kernel-Alucard-V2.6.9)
Upgraded to Linux v.3.4.96
Optimized cpu governors (alucard, nightmare, darkness, ondemand, interactive)
Added pump_inc_step_at_min_freq for alucard_governor.
Made Pump_inc_step_at_min_freq, pump_inc_step and pump_dec_step configurable differently on every cpu by stweaks. Increased also freq for responsiveness to 1134000.
Optimized hotplug governors (Alucard_hotplug, intelliplug, MSM_Hotplug)
Optimized cpuboost
Patched sched, mm, kernel time parts.
Added arch_power configurable by stweaks. (it is on by default)
Reverted commit on sched that caused audio problem when phone is in sleep mode.
Increased default maxcoreslimitsleep to 2 cores and increased scaling_max_freq_sleep to 1242000.
Imported general kernel commits.
Many changes have been done on settings so delete /data/.alucard before flashing the new kernel.
v29 - 14/06/2014 (Kernel-Alucard-V2.6.8)
Upgraded to Linux v.3.4.93
Optimized cpu governors (alucard, nightmare, darkness, ondemand, interactive)
Optimized hotplug governors (Alucard_hotplug, intelliplug, MSM_Hotplug)
Optimized cpuboost
Made faux sound control configurable by stweaks. (NEW for GE & TW Kernel)
Enhanced AC/USB Fastcharger and made it configurable by stweaks. Thanks to @Ktoonsez (NEW for TW Kernel)
Imported LED control and made it configurable by stweaks. Thanks to @googyanas. (NEW for AOSP & TW Kernel)
Removed cpu hotplugging (SLEEP) tab on stweaks. It was not so useful.
Removed cpu tuning(SLEEP) tab on stweaks. It was not so useful.
Charging animation when phone is turned off works on TW, GE, AOSP Kernel.
GE, TW, AOSP kernels are aligned among them. They contain the same features :)
Imported many commits for SMP, MM, timers etc parts.
Many changes have been done on settings so delete /data/.alucard before flashing the new kernel.
v28.1 - 05/06/2014 (Kernel-Alucard-V2.6.7la)
Optimized alucard_hotplug, msm_hotplug, intelli_plug.
Optimized alucard, ondemand cpu governors
Optimized cpuboost.
Enhanced FAST CHARGE and made configurable on stweaks. Many options.... :) Thanks to Ktoonsez.
Added Sound Control configurable on Stweaks. Thanks to googyanas. FIXED BY ME :) Headphon PA Gain has been restored to 12 as default. For people that need more power, change it to 20 :)
Fixed charging when phone is turned off. Pressing power to restart phone when it is turned off and connected to AC/USB cable doesn't cause animation loop. TO Restart phone is necessary to hold power button pressed for 2-3 sec. :)
USB HID Keyboard and mouse is restored. It works properly, I have already tested :):)
Added HYBLA as TCP congestion control. Thanks to Kantjer.
General performace increment.
Improved battery consuming (just a bit more) in sleep mode.
DELETE /data/.alucard before flashing new kernel. I have done many changes to profiles. :)
v27 - 31/05/2014 (Kernel-Alucard-V2.6.7g)
Optimized mm.
Optimized sched.
Enabled VMALLOC_SAVINGS by default.
Optimized alucard, darkness, nightmare, ondemand, interactive cpu governors.
Optimized cpuboost.
Optimized alucard_hotplug govenor.
Optimized intelli_plug governor.
We have a new hotplug governor called "msm_hotplug". It is very good and it can be enabled by stweaks. Thanks to @dorimanx, @neobuddy89
Added tcp congestion control configurable by stweaks. Default is cubic.
Added sched_mc_powersaving configurable by stweaks. Default was 2 but now can be configured.
Added gentle fair sleepers configurable by stweaks.
Removed useless cortex tcp, tcp_ram, ipv6 options.
Fixed a bug in cortex awake/sleep switching. Thanks to @dorimanx.
Now all settings show "kHz" as unit instead of MHz/Hz in stweaks. Thanks to @Formhault
Now Cifs can be enabled and should work. Thanks to @dorimanx.
Removed "CM" profiles overwriting for who use CM ROM with my kernel.
Added two push buttons on stweaks. 1) My XDA thread kernel link. 2) Donation link :)
General performance improvements.
PS. DELETE /data/.alucard folder before flashing new kernel.
v26 - 24/05/2014 (Kernel-Alucard-V2.6.7a)
Upgraded to Linux v.3.4.91
Removed 162, 270 Mhz step frequency. They were useless.
Removed ZRAM, ZCACHE and ZSMALLOC. We have 2gb ram, so we don't care.....
Optimized all cpu governors.
Optimized alucard hotplug governor.
Optimized intelli-thermal.
Set ROW I/O scheduler as default.
Include tcp congestion control in the kernel but it is not configurable on stweaks. Maybe in the next release :)
Use phone as USB KEYBOARD/MOUSE(Thanks to @dorimanx):
Base project: https://github.com/pelya/android-keyboard-gadget
Required app: https://play.google.com/store/apps/d...eyboard.client
Steps:
* Start ADB Debugging
* Start app
* Connect device to system via USB cable
Known minor issue[OLD BOOTLOADER]: Phone can charge when is off, animation is visible but it is necessary to unplug cable and press power for phone booting.
DELETE /data/.alucard before flashing new kernel (Recommended)
UPDATE: [Compiled with new SaberMod 4.8.3 with O3 and all other optimization flags + hard float flag]
v25 - 18/05/2014 (Kernel-Alucard-V2.6.6o)
Upgraded to linux 3.4.90 version.
Imported about 300 commit regarding sched and mm. General performance improved.
Optimized all cpu governors and alucard_hotplug governor.
Removed DVFS touch interface and replace with CPU BOOST. Parameters are configurable on stweaks.
Phone is now much more fast and smooth.
PS. It is recommended to delete /data/.alucard before flashing.
Thanks to Jimsilver73 for testing:)
v24 - 12/05/2014 (Kernel-Alucard-V2.6.6mm [ OFFICIAL TEST]
Upgraded to linux 3.4.89 version.
Alucard_hotplug optimized. Added new parameters for tweaking.
Optimized my cpu governors. Use Power Efficient workqueue.
Adjusted sampling rate for all governors. Thanks to Dorimanx.
Corrected some descriptions. Thanks to Kantjer, FlanjeUK and Jimsilver73.
Removed cpu governor switching during sleep phase.
Phone is smoother and faster than previous version.
Battery consuming should be better during awake phase.
v23 - 07/05/2014 (Kernel-Alucard-V2.6.6m
Compiled with Sabermod 4.10 O3 flags.
Optimized dvfs touch interface. Inserted descriptions. Thanks to Kantjer.
Corrected some descriptions in stweaks. Thanks to Kantjer.
Corrected switching governor during awake/sleep mode.
Changed gpu clk reset rate 1800000 to 27000000(Default). Solved graphical glitches for some games like PVZ2.