CERCA
PER MODELLO
FullScreen Chatbox! :)

Utente del giorno: 9mm con ben 2 Thanks ricevuti nelle ultime 24 ore
Utente della settimana: elmegio con ben 7 Thanks ricevuti negli ultimi sette giorni
Utente del mese: bluemask con ben 43 Thanks ricevuti nell'ultimo mese

Visualizzazione dei risultati da 1 a 4 su 4
Discussione:

Driver and tool to flash MTK phones

Se questa discussione ti è stata utile, ti preghiamo di lasciare un messaggio di feedback in modo che possa essere preziosa in futuro anche per altri utenti come te!
  1. #1
    Androidiani Power User L'avatar di Sartana


    Registrato dal
    Jun 2012
    Località
    Firenze
    Messaggi
    2,191
    Smartphone
    Samsung S4 Active i9295 int

    Ringraziamenti
    328
    Ringraziato 870 volte in 649 Posts
    Predefinito

    Driver and tool to flash MTK phones

    This is an english translation of this original thread

    Driver and tool for Mediatek by bovirus



    First Step: identify hardware

    Before using drivers it’s necessary to discover the hardware of your phone

    - Model Name
    Usually it’s written on a silver label under the battery

    - Hardware features
    You can see hardware feature with a secret code (your phone must be on and working) or whit factory mode menu (phone broken or that doesn’t boot).

    - Secret code for hardware
    On dialer use

    *#*#116#*#* o *#*#114#*#*

    These codes maybe don’t work on all phones. It will be seen a menu whit many features.You can save it making a screenshot ([VOL-] + [POWER]),a photo whit another phone or writing it
    To exit use home button

    Basic info to take note
    - LCD (Driver LCD)
    - Camera ( camera driver for first and secondary camera)
    - Touchpanel (driver touchpanel)
    - Buiild number (version firmware)
    - Memoty (amount of RAM and ROM)
    - Board information - Chip code (chip CPU)

    - Menu factory mode [Factory test]

    - First of all phone must be off.
    - Turn on phone whit [POWER] and [VOL-]
    - When boot logo appears leave [POWER] but keep holding [VOL-]
    - After a few seconds a yellow text will appear [Factory mode] and there will be a menu, in english or chinese.

    Chinese recovery translation

    工厂模式 = Factory model
    完整测试 = Full test/diagnostic
    单项测试 = Single-item test
    测试报告 = Test report/ Testing results
    清除e MMC = Clear/reset e MMC
    版本信息 = Version Information (this is like a readme)
    重启手机 = Restart phone

    Usually VERSION INFORMATION it’s the last but one of the menu

    - Use keys [VOL+] e [VOL-] to move on [Version], then use home key (central key)
    - There you will see hardware features; if you can’t see driver info try to swype up the bottom. Take notes of data, especially of "Cam_Info", "LCm" e "Touchpanel".
    - To return on first menu use [Back] key
    move with [VOL+] or [VOL-] on [Reboot] then use [HOME] and phone will reboot (of course if phone is in bootloop it will not boot)

    These infos are very important when you make a post, cause they will help people to understand your model and give the right help:

    - Model name (etichetta di solito di colore argento sotto la batteria).
    - Memory (RAM e ROM)
    - Mainboard - Chip code (chip CPU)
    - Hardware LCD (LCM)
    - Hardware camera
    - Hardware touchpanel
    - Build number (versione firmware)


    Windows 7/Windows 8 - driver signature

    On Windows Vista/Windows 7/Windows8/Windows 8.1 it’s necessary to install drivers disabling driver signature (because driver USB Preloader and USB ADB aren’t signed).

    Windows Windows 7/8 32bit - Disabilitazione firma digitale driver (by ghost45)
    Windows Windows 7/8 64bit - Disabilitazione firma digitale driver (by ghost45)


    Windows Windows 8.1 - Disabilitazione firma digitale driver

    Windows 7 - Disabling driver signature via BCEDIT

    On Windows you can disable/enable driver signature whit a command, BCDEDIT

    - Disable driver signature
    Open prompt MS-DOS (whit administrator right) and type
    bcdedit /set nointegritychecks ON
    Close prompt MSDOS and reboot PC. Now driver signature it’s disabled.

    - Enable driver Signature
    Open prompt MS-DOS (whit administrator right) and type
    bcdedit /set nointegritychecks OFF
    Close prompt MSDOS and reboot PC. Now driver signature it’s enabled


    Driver USB ADB

    Driver USB ADB are necessary to connect and recognize your phone from the PC, for esample to use some tool like MTKDroid

    Driver USB ADB universali Google v11 (XP/Vista/Windows7) v. 1.123

    Driver USB ADB Mediatek v. 27.08.2012 (XP/Vista/Windows7) v. 1.123

    These driver doesn’t have installer:
    Connect your phone to Pc, on Device Manager you’ll see a yellow exclamation point in correspondence of your phone.
    Select your device, double click on it ->tab Driver -> Update driver -> Choose Manually select driver and then go to folder where you unzip drivers and select it

    Universal ADB Installer

    Universal ADB Instalelr - Info e downlaod (androidaxda)

    Download and unzip, then launch .EXE file and follow instruction.


    Driver USB preloader (for Flashtool)

    Driver USB preloader are necessary to recognize your MTK phone from tool like SP Flash Tool or Multiport Download Tool.

    Driver USB preloader Mediatek (XP/Vista/Windows7) v. 1.123
    Driver USB preloader Mediatek (XP/Vista/Windows7) v. 1.5
    Driver USB preloader Mediatek (Windows8) v. 1.4


    Android Platform tools


    Android Platform Tools (command prompt adb.exe/fastboot.exe) are useful to do some advanced operation on android phones

    Android Platform tools v. 22.0.0 (Android 5.1)
    Android Platform tools v. 23.0.RC4 beta (Android 5.1)


    Android Build Tools

    Android Build Tools (prompt command aapt.exe/zipalign.exe) are useful to do some advanced operation on android phones

    Android build tool v. 22.0.1 (Android 5.1)
    Android build tool v. 23.0.RC3 beta (Android 5.1)
    Ultima modifica di Sartana; 23-07-15 alle 16:11
    Non risponderò in PM a richieste di aiuto sui telefoni. C'è il forum per questo, se usato correttamente

    Se ti sono stato d'aiuto c'è il tasto Thanks apposta in basso a sinistra


    REGOLAMENTO FORUM
    Leggere SEMPRE prima di postare
    REGOLAMENTO SEZIONI MTK
    Leggere SEMPRE prima di postare


  2. I seguenti 2 Utenti hanno ringraziato Sartana per il post:

    bubbl3 (23-07-15),leonbeson (26-07-15)

  3.  
  4. #2
    Androidiani Power User L'avatar di Sartana


    Registrato dal
    Jun 2012
    Località
    Firenze
    Messaggi
    2,191
    Smartphone
    Samsung S4 Active i9295 int

    Ringraziamenti
    328
    Ringraziato 870 volte in 649 Posts
    Predefinito

    MTK Droid Tool

    MTKDroid it’s compatible only with phones whit 32 bit MTK family cpu ( MT65xx - MT6582/MT6589/MT6592/etc)

    MTKDroid IT’S NOT compatible with MTK 64 bit cpu ( MT67xx - MT6732/MT6752/ecc)
    There is a patch to recognize phones with cpu MT67xx family from MTKDroid, but no operations are possible (patch/backup/ecc).

    My advice it’s to use 2.4.7 version with DATA partition flag, except for cpu newer than mtk6589

    Mediatek MTKDroid - Changelog

    Mediatek MTKDroid 2.4.7 (27.06.2013)
    Mediatek MTKDroid 2.4.8 (12.07.2013)
    Mediatek MTKDroid 2.4.8b 812.07.2013)
    Mediatek MTKDroid 2.5.0 (02.12.2013)
    Mediatek MTKDroid 2.5.1 (05.12.2013)
    Mediatek MTKDroid 2.5.2 (20.12.2013)
    Mediatek MTKDroid 2.5.2b (21.12.2013)
    Mediatek MTKDroid 2.5.2d (27.12.2013)
    Mediatek MTKDroid 2.5.2e (31.12.2013)
    Mediatek MTKDroid 2.5.3 (19.01.2014)

    Mediatek MTKDroid 2.5.3d (24.02.2015) - BETA


    Version 2.5.3d (beta) it’s the 2.5.3 version with some changes:

    - MTKDroidTools.ini modified to support new cpu MTK6732/MT6752
    - Android platfdorm tools (adb) updated (v219)
    - Busybox updated (v. 1.23.1 Stericsson)
    - Root explorer replaced by SimpleExplorer
    - Supersu updated (v. 2.46)


    Interface language: English/Italian/Spanish/Czech/

    MTKdroid - forum di riferimento (xda) in inglese

    thanksgiving to rua1 (from xda) for development of MTKdroid.

    - instruction
    unzip archive in a folder of your choice
    MTKdroidTools.exe start in Italian language, if you want English you must modify italiano.lang in italiano.old.
    Inside archive there’s a simple guide on main function.



    Doing Root
    Select tab "Phone Information" -> Root

    Enable recovery CWM
    Select "Root - Backup - recovery" -> "To choose the boot.img file” and select "Recovery and boot”.
    Confirm

    Enable permanently root
    Select tab "Root - Backup - recovery" -> "Superuser"
    Choose program you want to install (SupeSu o Superuser)

    Backup ( MTKdroid format)
    Select tab "Root - Backup - recovery" -> Backup".
    At the end you are asked to choose if you want to zip backup. make your choise.

    Backup ( Flashtool format)
    Select tab "Root - Backup - recovery" -> "To prepare block for Flash Tool"
    Select "files.md5" in the subfolder called backup inside the folder where you save your backup.
    Inside that folder will be created a subfolder "FilesforFlashtooL" with files ready to be used with flash tool to reflash ROM.

    If trying to Root your phone (indicatore Giallo -> tasto "Root") appear a message "adb not installed" try one of these alternatives

    - Try to install Supersu app from Play store confirming rights and Busybox app by Stericsson ( Play Store) e retry.

    - If "adb not installed" always it appears after you installed SuperSu and Busibox it’s likely that root it’s incomplete.Try to remove root (using app you’ve used to root)
    - If you can’t remove root with original program you’ve used, launch supersu and select : Settings -> FullUnroot


    Backup Partition of 64 bit cpu phones

    Phones that come with Mediatex 64bit cpu(MT67xx) aren’t compatible with MTKDroid.
    Next guide will help to make a backup of that phones.

    1 - Backup doesn’t include scatter file creation, that file has to create manually

    2 - The files size of the partition it’s the same of the total size of partition and not the size of the files inside.

    Backup partizioni teelfoni con processore Mediatek 64bit
    Ultima modifica di Sartana; 25-07-15 alle 22:03
    Non risponderò in PM a richieste di aiuto sui telefoni. C'è il forum per questo, se usato correttamente

    Se ti sono stato d'aiuto c'è il tasto Thanks apposta in basso a sinistra


    REGOLAMENTO FORUM
    Leggere SEMPRE prima di postare
    REGOLAMENTO SEZIONI MTK
    Leggere SEMPRE prima di postare


  5. I seguenti 2 Utenti hanno ringraziato Sartana per il post:

    bubbl3 (23-07-15),leonbeson (26-07-15)

  6. #3
    Androidiani Power User L'avatar di Sartana


    Registrato dal
    Jun 2012
    Località
    Firenze
    Messaggi
    2,191
    Smartphone
    Samsung S4 Active i9295 int

    Ringraziamenti
    328
    Ringraziato 870 volte in 649 Posts
    Predefinito

    SmartPhone (SP) Flash Tool

    Utility to flash (partial/total) smartphones with chipset MTK (Mediatelk).

    Mediatek SP Flash Tool v. 3.1216.02 (19.04.2012)
    Mediatek SP Flash Tool v. 3.1222.00 (30.05.2012)
    Mediatek SP Flash Tool v. 3.1224.01 (12.06.2012)
    Mediatek SP Flash Tool v. 3.1238.5 (21.09.2012)
    Mediatek SP Flash Tool v. 3.1304.0.119 (28.01.2013)
    Mediatek SP Flash Tool v. 3.1304.0.119 TDA (28.01.2013)
    Mediatek SP Flash Tool v. 3.1312.0.139 (27.03.2013)
    Mediatek SP Flash Tool v. 3.1316.0.150 (24.06.2013)
    Mediatek SP Flash Tool v. 3.1328.0.183 (11.07.2013)
    Mediatek SP Flash Tool v. 3.1344.0.212 (01.11.2013)

    Mediatek SP Flash Tool v. 5.1320.00 (23.05.2013)
    Mediatek SP Flash Tool v. 5.1343.01 (18.10.2013)
    Mediatek SP Flash Tool v. 5.1452.00.000 (30.12.2014)
    Mediatek SP Flash Tool v. 5.1504.00.000 (15.01.2015)
    Mediatek SP Flash Tool v. 5.1512.00.100 (26.03.2015) Windows
    Mediatek SP Flash Tool v. 5.1512.00.100 (26.03.2015) Linux 64bit
    Mediatek SP Flash Tool v. 5.1516.00.100 (21.04.2015) Windows
    Mediatek SP Flash Tool v. 5.1516.00.100 (21.04.2015) Linux 64bit
    Mediatek SP Flash Tool v. 5.1520.00.000 (14.05.2015) Windows
    Mediatek SP Flash Tool v. 5.1520.00.100 (14.05.2015) Linux 64bit

    From version 5.xxx it’s added support for 64bit CPU (es. MT6732/MT6752/etc)

    So version newer than 5.xx are compatible with both chispet 32bit (MT65xx - ex. MT6582/6589/6592) and 64bit MT67xx (es. MT6732/MT6752).

    SP Flash Tool - XDA (in inglese)

    Flashtool - Thread needrom (richiede registrazione)

    Flashtool - Linux installation (thread XDA)

    Mediatek - Flashtool (by mtk2000.ru)
    Tool vari (by mtk2000.ru)

    How to use SP FlashTool

    Requirements: driver Mediatek USB Preloader must be installed.
    To verify if driver USB Preloader are correctly installed, turn off phone and remove battery, then connect phone to PC and watch if appear a notification of a Preloader device. This confirm that drives are correctly installed.

    Really important: You had to use Flashtool always in "DOWNLOAD ONLY" mode.
    The only case to use "FIRMWARE UPGRADE" mode is when appear "PMT changed" message. (see later fox explanation)
    NEVER USE “FORMAT ALL + DOWNLOAD” mode that means lost of NVRAM partition and IMEI.



    - Unzip ROM in FlashTool format
    - Install driver USB Preloader. on Windows 7/8 you had to disable signature of driver
    - Connect usb cable to phone (without battery) but don’t connect phone to pc.
    - Start Flashtool.
    - Select the scatter file of the ROM in FlashTool format
    - Select all ROM modules except SEC_RO and PRELOADER (never select)
    - Verify that you are using DOWNLOAD ONLY mode. If not, select this modality.
    - Select [DOWNLOAD] key
    - Wait a couple of seconds then connect phone to PC (remember, turned off and whitout battery)
    - Now flash has to be started. At the end will appear a green circle to confim operation
    - If flash doesn’t start, let phone connect to PC then tr to insert battery .
    - Close FlashTool.
    - Disconnect USB from PC, then disconnect USB from phone, insert the battery and turn on phone. First boot can be more longer than usually.

    If appear "PMT changed" message it means that partition schemes of your ROM are different from the Rom you’re trying to flash
    In this situation you had to use necessary FIRMWARE UPGRADE mode.
    NEVER never select "FORMAT ALL + DOWNLOAD". You’ll lost NVRAM partition and IMEI, and IMEI recover it’s not guaranteed
    To proceed, select all ROM’s modules, select FIRMWARE UPGRADE mode and proceed as described before.
    Ultima modifica di Sartana; 25-07-15 alle 22:03
    Non risponderò in PM a richieste di aiuto sui telefoni. C'è il forum per questo, se usato correttamente

    Se ti sono stato d'aiuto c'è il tasto Thanks apposta in basso a sinistra


    REGOLAMENTO FORUM
    Leggere SEMPRE prima di postare
    REGOLAMENTO SEZIONI MTK
    Leggere SEMPRE prima di postare


  7. Il seguente Utente ha ringraziato Sartana per il post:

    leonbeson (26-07-15)

  8. #4
    Androidiani Power User L'avatar di Sartana


    Registrato dal
    Jun 2012
    Località
    Firenze
    Messaggi
    2,191
    Smartphone
    Samsung S4 Active i9295 int

    Ringraziamenti
    328
    Ringraziato 870 volte in 649 Posts
    Predefinito

    reserved
    #MAN AT WORK#



    Any help will be appreciate (for sure i made mistakes, feel free to correct me
    Ultima modifica di Sduzz; 25-07-15 alle 21:00
    Non risponderò in PM a richieste di aiuto sui telefoni. C'è il forum per questo, se usato correttamente

    Se ti sono stato d'aiuto c'è il tasto Thanks apposta in basso a sinistra


    REGOLAMENTO FORUM
    Leggere SEMPRE prima di postare
    REGOLAMENTO SEZIONI MTK
    Leggere SEMPRE prima di postare


Tag per questa discussione

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire risposte
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Torna su
Privacy Policy