[ROM] [ZTE Z7MAX] [Android 5.1.1] CM 12.1 unofficial

Thank you Friend,

All went well, now with working playstore.
waiting for your Android 6.1 final version.

Regards,

Thank you for Manuelb Fixing the Imei problem.. but now it stands ( V17 ): " to place a call,first turn off Airplane mode"
Im on WCDMA/LTE setting but that didnt solve the problem any tip for me ?

Quote:

---

Originariamente inviato da ForeignDude

Thank you for Manuelb Fixing the Imei problem.. but now it stands ( V17 ): " to place a call,first turn off Airplane mode"
Im on WCDMA/LTE setting but that didnt solve the problem any tip for me ?

---

the phone says this thing when you try to call ?
It is the first time I hear of this problem
you have tried to turn on and off the airplane mode ?
which baseband version you have ? (try to flash the latest 3.65)

Paolo, please add the type of network "LTE/WCDMA". I need the type of network where there is no option GSM. Very need!:fear2:
On YIOS ROM has this type of network.
Thank you!

PS I recently looked at by YIOS and the last I want to say that your firmware CM is still more stable and convenient! Good work!:light:

Quote:

---

Originariamente inviato da LiveMoto

Paolo, please add the type of network "LTE/WCDMA". I need the type of network where there is no option GSM. Very need!:fear2:
On YIOS ROM has this type of network.
Thank you!

PS I recently looked at by YIOS and the last I want to say that your firmware CM is still more stable and convenient! Good work!:light:

---

but should already be there

codice:

---

        <item>@string/preferred_network_mode_td_scdma_lte_gsm_wcdma_cdma_evdo_choice</item>
        <item>@string/preferred_network_mode_td_scdma_gsm_wcdma_cdma_evdo_choice</item>
        <item>@string/preferred_network_mode_td_scdma_gsm_wcdma_lte_choice</item>
        <item>@string/preferred_network_mode_td_scdma_wcdma_lte_choice</item>
        <item>@string/preferred_network_mode_td_scdma_gsm_wcdma_choice</item>
        <item>@string/preferred_network_mode_td_scdma_gsm_lte_choice</item>
        <item>@string/preferred_network_mode_td_scdma_gsm_choice</item>
        <item>@string/preferred_network_mode_td_scdma_lte_choice</item>
        <item>@string/preferred_network_mode_td_scdma_wcdma_choice</item>
        <item>@string/preferred_network_mode_td_scdma_only_choice</item>
        <item>@string/preferred_network_mode_lte_wcdma_choice</item>
        <item>@string/preferred_network_mode_lte_choice</item>
        <item>@string/preferred_network_mode_global_choice</item>
        <item>@string/preferred_network_mode_gsm_wcdma_lte_choice</item>
        <item>@string/preferred_network_mode_cdma_lte_evdo_choice</item>
        <item>@string/preferred_network_mode_cdma_evdo_gsm_wcdma_choice</item>
        <item>@string/preferred_network_mode_evdo_only_choice</item>
        <item>@string/preferred_network_mode_cdma_wo_evdo_choice</item>
        <item>@string/preferred_network_mode_cdma_evdo_auto_choice</item>
        <item>@string/preferred_network_mode_gsm_wcdma_auto_choice</item>
        <item>@string/preferred_network_mode_wcdma_only_choice</item>
        <item>@string/preferred_network_mode_gsm_only_choice</item>
        <item>@string/preferred_network_mode_gsm_wcdma_preferred_choice</item>

---

Quote:

---

Originariamente inviato da paolothlw8

but should already be there

---

From the menu, I do not see this menu item. :(

Paolo sorry!
It turns out there is a scrolling :)))

Quote:

---

Originariamente inviato da LiveMoto

From the menu, I do not see this menu item. :(

Paolo sorry!
It turns out there is a scrolling :)))

---

ahaha lol ok :D

release V18 in first page

It does not reboot in to recovery.. something obviously misflashed by myself. :emo_im_frustate:

Quote:

---

Originariamente inviato da ForeignDude

It does not reboot in to recovery.. something obviously misflashed by myself. :emo_im_frustate:

---

for reboot recovery options you need to enable the advanced reboot in developer options

Still wont work, something very strange..

install quick reboot and reboot in recovery with this app

Nope still wont work.. gotta give it up for today.

Quote:

---

Originariamente inviato da paolothlw8

release V18 in first page

---

Hey Paolo, thanks so much for your work!!! Just wanted to know if there is a 400ppi version of nubia camera app?

Quote:

---

Originariamente inviato da evitself

Hey Paolo, thanks so much for your work!!! Just wanted to know if there is a 400ppi version of nubia camera app?

---

NubiaCamera_5.2_V5.2.7_400dpi.apk

Quote:

---

Originariamente inviato da paolothlw8

NubiaCamera_5.2_V5.2.7_400dpi.apk

---

Cool! Tried it, works perfectly with lcd_density 400dpi configuration. Thanks!

Paolo, you can try to add support multibutton headsets?
There Headset Xiaomi Piston with three buttons.
This proprietary headset Xiaomi.
The type sine firmware 4.4 are two of the three buttons. On the CM12 operates only the center.
I use an application KeyTest that would determine which buttons sees the system.
Concludes that the problem of soft or in the kernel.

Have a nice day!:laughing:

Quote:

---

Originariamente inviato da LiveMoto

Paolo, you can try to add support multibutton headsets?
There Headset Xiaomi Piston with three buttons.
This proprietary headset Xiaomi.
The type sine firmware 4.4 are two of the three buttons. On the CM12 operates only the center.
I use an application KeyTest that would determine which buttons sees the system.
Concludes that the problem of soft or in the kernel.

Have a nice day!:laughing:

---

if you use an app like jays headset control you can use all button or still only one ?

Quote:

---

Originariamente inviato da paolothlw8

if you use an app like jays headset control you can use all button or still only one ?

---

I will check...

Paolo view this please: https://github.com/M1cha/android_dev...mment-54744916

Quote:

---

I think I see why Xiaomi headset buttons don't work - they use different resistance values for buttons compared to what the kernel in @M1cha build expects.

I've compared "sound/soc/msm/apq8064.c" in kernel source between @M1cha version and official (at least that's what I found) version from Xiaomi (https://github.com/MiCode/mi2_kernel), and they differ in the function that I understand as setting button resistances: at

static void *def_tabla_mbhc_cal(void)

somewhere in its code there is this:
Xiaomi M1cha
btn_low[0] = -75; btn_low[0] = -50;
btn_high[0] = 150; btn_high[0] = 10;
btn_low[1] = 151; btn_low[1] = 11;
btn_high[1] = 330; btn_high[1] = 52;
btn_low[2] = 331; btn_low[2] = 53;
btn_high[2] = 655; btn_high[2] = 94;
btn_low[3] = 21; btn_low[3] = 95;
btn_high[3] = 62; btn_high[3] = 133;
btn_low[4] = 154; btn_low[4] = 134;
btn_high[4] = 181; btn_high[4] = 171;
btn_low[5] = 182; btn_low[5] = 172;
btn_high[5] = 218; btn_high[5] = 208;
btn_low[6] = 219; btn_low[6] = 209;
btn_high[6] = 254; btn_high[6] = 244;
btn_low[7] = 63; btn_low[7] = 245;
btn_high[7] = 104; btn_high[7] = 330;

I've fixed (at least on my device) both Xiaomi Pistons (gold, v.2) and MiKey with CM11 m8.
I had to re-compile the kernel (with some changes) and to change keylayout file.

Pull requests are:
https://github.com/M1cha/android_ker...i_aries/pull/2

---

there's even a patch for a different device to Cm11: https://github.com/M1cha/android_dev...mment-54800092

Please, pls!!)

with the apk keytest you see the scancode of all button or only one ?

Quote:

---

Originariamente inviato da paolothlw8

with the apk keytest you see the scancode of all button or only one ?

---

TWO!
CENTER and one VOL

code 226, 257

Allegato 155316Allegato 155317

Quote:

---

Originariamente inviato da LiveMoto

TWO!
CENTER and one VOL

code 226, 257

Allegato 155316Allegato 155317

---

ok thanks
tomorrow I will try some changes on kernel source
but I don't have this headset so I can't test if work
then...i will send it to you :)

Quote:

---

Originariamente inviato da paolothlw8

then...i will send it to you :)

---

Yeah! Super! Good luck and Have fun from work:yeah:
I think really the reason lies in this: https://www.androidiani.com/forum/in...ml#post7216791

PS I express interest in community 4PDA, some users have with the community also want it.
I pay your morning coffee on the PayPal :)

Hello one question: the phone is always in Airplane Mode.
Yes i can disable airplane mode but it says "turn off airplane mode"

I tried so many Nubia Roms.. has this to do with QPST and Winhex settings ?

Quote:

---

Originariamente inviato da ForeignDude

Hello one question: the phone is always in Airplane Mode.
Yes i can disable airplane mode but it says "turn off airplane mode"

I tried so many Nubia Roms.. has this to do with QPST and Winhex settings ?

---

I think yes
you have already tried to reflash entirely the firmware stock with nubia tools ?

flashed baseband version 3.55 and 3.65 both dont work, i will try somethings in qpst :)

Quote:

---

Originariamente inviato da ForeignDude

flashed baseband version 3.55 and 3.65 both dont work, i will try somethings in qpst :)

---

try to flash all phone with nubia tools and not only the baseband
ROM Nubia Z7 Max v3.09 | [Official] add the 04/28/2015 on Needrom

hello v18 has several small problem.
Preferred SIM for Calls can't keep "Ask every time" ,it will change from "Ask every time" to card 2 every reboot.
Double-tap to wake will be turned off when reboot some time,
Can CM12.1 take settings Heads UP for every single app?
because if it only for all apps, Dialer's Heads UP can't display name when my friends call me some time.it only disphay their phone numble.

Paolo.
I've been doing a snapshot of the camera. For several months notice incorrect work of the camera application.
Sometimes the captured image is not stored on the phone, sometimes instead preserved black square.
In addition, if you enable the phone network WCDMA/LTE without GSM, the camera application will continuously restart if the network is lost signal. Helps enable Air-mode.

Very often, photographs are not recorded, but can not figure out the algorithm of actions.

Quote:

---

Originariamente inviato da LiveMoto

Paolo.

---

And please, update CM12 and BlissPop ROM.
Thanks!

next week I will update the cm12.1 but sorry...only the cm12.1

Anybody knows Where i can turn Radio On in Secret settings ?

link and changelog release V19 in first page

Hi Paolo, thank you for your work.
Do you can add fuse in kernel?

Hi Paolo! More updates will not be?
Completion CM12 is completed?

From my remaining problems:
- If you receive a call, the caller hears me after 1 second. Because of this, he misses my phrase, "Yes, I am in touch", "Hi" or "Hello".

Thank you for the work Paolo!

link release V20 in first page

Thanks Paolo!

Quote:

---

Originariamente inviato da paolothlw8

link and changelog release V19 in first page

---

Paolo, new year is good! Can you upload your V20 code? I was always wrong when compiling CM12.1. Thank you very much!

Link release V21 in first page

Quote:

---

Originariamente inviato da paolothlw8

Link release V21 in first page

---

target StaticLib: third_party_webrtc_modules_video_render_module_gyp (/home/syai2012/rom/cm12/out/target/product/nx505j/obj/STATIC_LIBRARIES/third_party_webrtc_modules_video_render_module_gyp _intermediates/third_party_webrtc_modules_video_render_module_gyp .a)
build/core/host_executable_internal.mk:31: recipe for target '/home/syai2012/rom/cm12/out/host/linux-x86/obj32/EXECUTABLES/third_party_libvpx_libvpx_obj_int_extract_arm_host _gyp_intermediates/libvpx_obj_int_extract' failed
make: *** [/home/syai2012/rom/cm12/out/host/linux-x86/obj32/EXECUTABLES/third_party_libvpx_libvpx_obj_int_extract_arm_host _gyp_intermediates/libvpx_obj_int_extract] Error 1
make: *** 正在等待未完成的任务....
target StaticLib: third_party_usrsctp_usrsctplib_gyp (/home/syai2012/rom/cm12/out/target/product/nx505j/obj/STATIC_LIBRARIES/third_party_usrsctp_usrsctplib_gyp_intermediates/third_party_usrsctp_usrsctplib_gyp.a)
target StaticLib: third_party_libjingle_libpeerconnection_gyp (/home/syai2012/rom/cm12/out/target/product/nx505j/obj/STATIC_LIBRARIES/third_party_libjingle_libpeerconnection_gyp_interm ediates/third_party_libjingle_libpeerconnection_gyp.a)

#### make failed to build some targets (20:38 (mm:ss)) ####

Paolo,I am in the compilation of this error, the compilation method and before the same, I would like to ask what is the reason? In addition, the CM1`3 camera in the electronic aperture can not save the photos, meaning that, can take pictures, but the photos did not save, I try to change the storage location into the built-in, but still not.