Visualizzazione stampabile
-
ok I have installed Skype and did the test with echo/sound test service and as you say it doesn't work
I'm trying to understand what is the problem :)
edit:
in logcat I see:
codice:
08-15 17:15:43.021 403 23332 E audio_route: unable to find path 'low-latency-record'
08-15 17:15:43.021 403 23332 D audio_hw_primary: select_devices: done
08-15 17:15:43.029 403 23332 E audio_hw_primary: start_input_stream: cannot open device '/dev/snd/pcmC0D15c': Invalid argument
08-15 17:15:43.029 403 23332 E audio_route: unable to find path 'low-latency-record'
08-15 17:15:43.029 403 23332 D hardware_info: hw_info_append_hw_type : device_name = handset-mic
08-15 17:15:43.032 403 23332 D audio_hw_primary: start_input_stream: exit: status(-5)
08-15 17:15:43.032 403 23332 D audio_hw_primary: in_standby: enter: stream (0xb5f16b80) usecase(11: low-latency-record)
-
ok fixed :)
just add this patch to the mixer_paths.xml
https://github.com/PaoloW8/android_d...f3b6dd8a53a4fc
-
IT WORKED! Thank you very much, i was wracking my brain trying to fix this, i guess that's why you need logcats :) . This will probably help my friend that has z7 mini too.
-
sure, also works for the z7mini :)
-
Quote:
Originariamente inviato da
paolothlw8
release V12 in first page
Hi, Paolo!
On the last release, after 10-15 sec. phone call disconnected.
-
That is weird, calls work fine on my rom, and its based on paolo's. Try flashing the new 3.85 baseband.
-
Quote:
Originariamente inviato da
pchatzop
That is weird, calls work fine on my rom, and its based on paolo's. Try flashing the new 3.85 baseband.
After flashing 3.85 baseband work fine.
-
Hi Paolo, Google has finally released Android 7.0 today. Do you have any plan to implement it for Nubia Z7 Max ?
-
Quote:
Originariamente inviato da
patwwh
Hi Paolo, Google has finally released Android 7.0 today. Do you have any plan to implement it for Nubia Z7 Max ?
sure but the sources codes are not released yet :)
so we have to wait the sources codes and that the cyanogen team start work on CM14
-
Fantastic! Thank you, Paul !
-
Quote:
Originariamente inviato da
paolothlw8
sure, also works for the z7mini :)
Do you have any plans for ANDOIRD 7?
repo init -u git://github.com/omnirom/android.git -b android-7.0
-
Quote:
Originariamente inviato da
awssong
Do you have any plans for ANDOIRD 7?
repo init -u git://github.com/omnirom/android.git -b android-7.0
I don't like omnirom
read the answer that I wrote yesterday
https://www.androidiani.com/forum/in...ml#post7621809
-
Paolo, you can have a look in my git if you want, i used bacon bluetooth kernel files, bdroid_build.cfg, and returned the hci_qcomm_init (using the bacon blob). I am not sure yet, but i feel a huge change in responsiveness in anything bluetooth related, i even set up my phone via a2dp to my computer, playing music for 2 hours now, no stuttering anywhere(even had some calls,music continued playing on its own after them). It surely needs more testing, but i think we are on the right path for this damned a2dp bug :) .
-
Quote:
Originariamente inviato da
pchatzop
Paolo, you can have a look in my git if you want, i used bacon bluetooth kernel files, bdroid_build.cfg, and returned the hci_qcomm_init (using the bacon blob). I am not sure yet, but i feel a huge change in responsiveness in anything bluetooth related, i even set up my phone via a2dp to my computer, playing music for 2 hours now, no stuttering anywhere(even had some calls,music continued playing on its own after them). It surely needs more testing, but i think we are on the right path for this damned a2dp bug :) .
ok thanks, I will look and I will try :)
It is a week that I'm working on CM14 but at the moment the source code is still very messed up (missing pieces and many are still buggy)
this morning I finally managed to complete the first compilation but the phone doesn't start :)
but no problem, I continue to work on it
-
Wow, you sure are brave for trying nougat so soon, I would wait till we have the first cm14(not aosp) roms for bacon. I will try my best to help once I find some time. I hope that solving the bugs in the current tree will prevent them from popping up in nougat builds.
-
CM14.0, after a week of works now boot !! :lol:
there is a really lot of bugs (nothing works....no sim, no wifi, no bluetooth, no audio, no camera etc etc....but infrared works lol).....but now start !!!
screenshot
-
Quote:
Originariamente inviato da
paolothlw8
CM14.0, after a week of works now boot !! :lol:
there is a really lot of bugs (nothing works....no sim, no wifi, no bluetooth, no audio, no camera etc etc....but infrared works lol).....but now start !!!
screenshot
Thank you for your hard work! We are looking forward to your work, I hope you to upload the same source as before, so that we can make progress together with you! Come on.
-
I am in the process of compiling, encountered this error, how do you solve it?
build/core/ninja.mk:148: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
I use the staging/cm-14.0. CM and then I use the DEVICE. you provided
-
Quote:
Originariamente inviato da
awssong
Thank you for your hard work! We are looking forward to your work, I hope you to upload the same source as before, so that we can make progress together with you! Come on.
sure but for the moment it is too early to release the device tree, there are too many bugs
Quote:
Originariamente inviato da
awssong
I am in the process of compiling, encountered this error, how do you solve it?
build/core/ninja.mk:148: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
I use the staging/cm-14.0. CM and then I use the DEVICE. you provided
the cm14 source codes are very bugged at the moment, I worked six days just to be able to compile without error....
-
release V13 in first page
-
Quote:
Originariamente inviato da
paolothlw8
CM14.0, after a week of works now boot !! :lol:
there is a really lot of bugs (nothing works....no sim, no wifi, no bluetooth, no audio, no camera etc etc....but infrared works lol).....but now start !!!
screenshot
How do you compile the CM14? Can be normal use it?
-
sorry but I have been 4 days without Internet -.-
a little update on the CM14 status:
What I Fixed:
audio
bluetooth
sim (both), the signal is unstable, I must investigate better
lte/h+ data connection
gps
buttons, led etc
infrared
What is still not working
wifi (doesn't turn on)
camera (both)
sensors
I continue to work on ithttp://static.androidiani.com/forum/...o_im_happy.png
edit:
wifi fixed :D
reedit:
sensors fixed :)
-
little update of the CM14 status:
camera fixed
radio fm fixed
I just need to fix the random rild crash before releasing a first aplha version
-
Thanks for your hard work !!!
-
Thx for your work !! :)
looking forward to the first stable veison !
-
Quote:
Originariamente inviato da
paolothlw8
little update of the CM14 status:
camera fixed
radio fm fixed
I just need to fix the random rild crash before releasing a first aplha version
Thank you for your hard work, they will believe that milk powder works for you praise! Hope to see your work as soon as possible.
-
hope u can finish the CM14 quickly or u update a latest CM14 to the MEGA(only for test)
-
CM14 status
ok I have not yet fixed the problem of random rild crash but I think today or tomorrow to release a first alpha version.
Also I will update my github so if someone wants to work on it will do
-
-
Quote:
Originariamente inviato da
paolothlw8
CM14 status
ok I have not yet fixed the problem of random rild crash but I think today or tomorrow to release a first alpha version.
Also I will update my github so if someone wants to work on it will do
Very much looking forward to, but also very grateful! We almost every day to see the posts have not updated.
-
Hi!
I'm having a question concerning the CM 13 ROM: Does anybody else have problems with the alarm? If the phone is off, it does not power on to wake me up.
Regards
-
rel V14 in first page
Quote:
Originariamente inviato da
willhaben79
Hi!
I'm having a question concerning the CM 13 ROM: Does anybody else have problems with the alarm? If the phone is off, it does not power on to wake me up.
Regards
yes, the alarm not work if the phone is off
-
Hey paolo, nice to see you are still working ton the cm13 branch. Could you explain to me the reason you removed the omx libs out of the latest update? There are also some small changes in bluetooth and RIL configurations, hope you have the willingness and time to explain the reasoning behind your changes. It would really help me and the rest of the community become better, thank you!
-
Quote:
Originariamente inviato da
pchatzop
Hey paolo, nice to see you are still working ton the cm13 branch. Could you explain to me the reason you removed the omx libs out of the latest update? There are also some small changes in bluetooth and RIL configurations, hope you have the willingness and time to explain the reasoning behind your changes. It would really help me and the rest of the community become better, thank you!
because the omx libs are compiled from source so no need to use the old precompiled blobs of the nubia stock firmware
for the ril configurations...simply they were useless so I removed :)
-
Nubia released a new rom for the z7 max, 3.89. They claimed to to release he source code for third party development. I tried to insert the vendor blobs from that version, and they broke camera. They made quite a few changes to the camera, including software image stabilization, therefore it would be great if we could benefit from them. Hope you have the time to take a look too, paolo!
-
Quote:
Originariamente inviato da
pchatzop
Nubia released a new rom for the z7 max, 3.89. They claimed to to release he source code for third party development. I tried to insert the vendor blobs from that version, and they broke camera. They made quite a few changes to the camera, including software image stabilization, therefore it would be great if we could benefit from them. Hope you have the time to take a look too, paolo!
yes, I tried with the new blobs on the cm14.1 but the camera doesn't work (like you)
I'm also trying to port the new nubia camera app to cm14 (and cm13)
so....I'm working on it :)
edit:
Quote:
They claimed to to release he source code for third party development.
if you find links or more information about this please inform me, thanks :)
-
I found the rom here: ROM Z7Max(NX505J)V3.89 ?stable? | [Official]-[Updated] add the 10/28/2016 on Needrom . Last paragraph(google translated) says that this will be the last update for the z7 series, unless serious problems arise, and gives this email: rom@nubia.com , for anyone interested in 3rd party rom development. If we could get the new camera hal in source code, it would be really great. Has anyone tested the new rom to see if there is considerable impovement in camera quality? The low light quality could really use some help.
-
Quote:
Originariamente inviato da
pchatzop
I found the rom here:
ROM Z7Max(NX505J)V3.89 ?stable? | [Official]-[Updated] add the 10/28/2016 on Needrom . Last paragraph(google translated) says that this will be the last update for the z7 series, unless serious problems arise, and gives this email:
rom@nubia.com , for anyone interested in 3rd party rom development. If we could get the new camera hal in source code, it would be really great. Has anyone tested the new rom to see if there is considerable impovement in camera quality? The low light quality could really use some help.
ok thanks
in the meantime I have fixed the problem with the new v3.89 camera blobs in cm14.1, now works fine :)
now I restore a cm13.0 backup and try to fix here too
however the port of the app nubia camera need more works to do
-
Great news! Hope you can get the fix up in github soon.(Or just tell me how you did it :) )
-
Quote:
Originariamente inviato da
pchatzop
Great news! Hope you can get the fix up in github soon.(Or just tell me how you did it :) )
in cm13.0 it is easier than the cm14.1
just copy this files from the 3.89 stock and it should work
codice:
paolo@Hal9000:/media/dati/Android/xx/system/system$ ls -R -l
.:
totale 12
drwxrwxr-x 2 paolo paolo 4096 ott 31 06:56 bin
drwxrwxr-x 3 paolo paolo 4096 nov 2 14:54 lib
drwxrwxr-x 3 paolo paolo 4096 ott 31 06:54 vendor
./bin:
totale 464
-rw-rw-r-- 1 paolo paolo 58816 dic 5 2012 mm-qcamera-app
-rw-rw-r-- 1 paolo paolo 9440 dic 5 2012 mm-qcamera-daemon
./lib:
totale 13392
drwxrwxr-x 2 paolo paolo 4096 ott 31 06:56 hw
-rw-rw-r-- 1 paolo paolo 29852 dic 5 2012 libbuffer_manager.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_liveshot.so
-rw-rw-r-- 1 paolo paolo 2944156 dic 5 2012 libFNVfbEngineHAL.so
-rw-rw-r-- 1 paolo paolo 2328724 dic 5 2012 libFNVfbEngineLib.so
-rw-rw-r-- 1 paolo paolo 8175376 dic 5 2012 libImageAlogrithm.so
-rw-rw-r-- 1 paolo paolo 42208 dic 5 2012 libmmcamera_interface.so
-rw-rw-r-- 1 paolo paolo 42088 dic 5 2012 libmmjpeg_interface.so
-rw-rw-r-- 1 paolo paolo 79140 dic 5 2012 libmm-qcamera.so
-rw-rw-r-- 1 paolo paolo 13572 dic 5 2012 libnubia_effect.so
-rw-rw-r-- 1 paolo paolo 5128 dic 5 2012 libnubiajpeg.so
./lib/hw:
totale 284
-rw-rw-r-- 1 paolo paolo 288312 dic 5 2012 camera.msm8974.so
./vendor:
totale 4
drwxrwxr-x 2 paolo paolo 4096 ott 31 07:01 lib
./vendor/lib:
totale 2152
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_default_video_4k.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_default_video.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_hfr_120.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_nightmode_1.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_nightmode_2.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_nightmode.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_ois_sharp_default_video_4k.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_ois_sharp_nightmode_2.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_preview4zsl.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_preview.so
-rw-rw-r-- 1 paolo paolo 26372 dic 5 2012 libchromatix_imx214_snapshot.so
-rw-rw-r-- 1 paolo paolo 42108 dic 5 2012 libmmcamera2_c2d_module.so
-rw-rw-r-- 1 paolo paolo 62524 dic 5 2012 libmmcamera2_cpp_module.so
-rw-rw-r-- 1 paolo paolo 25660 dic 5 2012 libmmcamera2_iface_modules.so
-rw-rw-r-- 1 paolo paolo 134680 dic 5 2012 libmmcamera2_imglib_modules.so
-rw-rw-r-- 1 paolo paolo 432240 dic 5 2012 libmmcamera2_isp_modules.so
-rw-rw-r-- 1 paolo paolo 33896 dic 5 2012 libmmcamera2_pproc_modules.so
-rw-rw-r-- 1 paolo paolo 160232 dic 5 2012 libmmcamera2_sensor_modules.so
-rw-rw-r-- 1 paolo paolo 83120 dic 5 2012 libmmcamera2_stats_modules.so
-rw-rw-r-- 1 paolo paolo 43112 dic 5 2012 libmmcamera2_vpe_module.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_gbao_imx214_lc898122_eeprom.so
-rw-rw-r-- 1 paolo paolo 17968 dic 5 2012 libmmcamera_imx135_front.so
-rw-rw-r-- 1 paolo paolo 17944 dic 5 2012 libmmcamera_imx135_gbao_lc898122.so
-rw-rw-r-- 1 paolo paolo 17944 dic 5 2012 libmmcamera_imx135_gbao.so
-rw-rw-r-- 1 paolo paolo 19296 dic 5 2012 libmmcamera_imx135_z5s_069.so
-rw-rw-r-- 1 paolo paolo 19328 dic 5 2012 libmmcamera_imx135_z5s.so
-rw-rw-r-- 1 paolo paolo 12028 dic 5 2012 libmmcamera_imx214_ois_sharp.so
-rw-rw-r-- 1 paolo paolo 12800 dic 5 2012 libmmcamera_imx214.so
-rw-rw-r-- 1 paolo paolo 5256 dic 5 2012 libmmcamera_liteon_imx214_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_ofilm_oty5f03_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_sharp_imx214_ois_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_sunny_p12v01m_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_sunny_p5v23c_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_sunny_q8v18a_eeprom.so
-rw-rw-r-- 1 paolo paolo 5204 dic 5 2012 libmmcamera_truly_cm7700_eeprom.so
-rw-rw-r-- 1 paolo paolo 562244 dic 5 2012 libmmcamera_tuning.so
-rw-rw-r-- 1 paolo paolo 37992 dic 5 2012 liboemcamera.so
paolo@Hal9000:/media/dati/Android/xx/system/system$