[ROM] [Z7MAX] [Android 7.1] CM 14.1 unofficial

Quote:

---

Originariamente inviato da pchatzop

Great work paolo! Cant wait to get working on nougat too once resurrection remix sources are out! Right now im busy trying to get gionee elife e7 work with marshmallow, and the camera turn out to be a real bummer :) .

For the Nubia z7(nx506j), i have made an attempt to port marshmallow to it, using z7 max files(paolo's tree with some of my modification for rr), you can find my files here: https://mega.nz/#F!s0YBSSLY!s6fX3aLbvvOaFj9otI_wDA . It contains a recovery and rom i built with a mostly adapted z7 max kernel(zte did not release sources for the lollipop kernel for nx506j) with some modifications and files from the kitkat nx506j sources.Blobs are from 3.83 firmware,if you try this and it works i can try to update them to 3.86 firmware.

No device to test it, so do as you want with the files. Also uploaded my sources on github(since someone has any desire to try anything for the nx506j) here: https://github.com/MrPink7

---

Do you have a suitable course? I also want to learn to adapt to the new mobile phone. Thank you

Quote:

---

Originariamente inviato da seth09

Hi Paolo,
I ported your nx505j device code to nx507j(Z7mini) and successfully compiled cm-14.1. The built works pretty well except for the proximity sensor. Sensors test shows the proximity functions correctly. But when making a call, the screen does not turn off. It would be appreciated if you could take a look at this problem. Thanks.

ps: how do I post the log?

---

yes, same problem on nx505j with CM14.0 and CM14.1
I solved this issue some time ago by doing a little patch to the SensorManager
apply this patch in frameworks/base: sensors.diff and recompile, after this the sensor should work

How is BT working on this latest beta?

Both on mokee and CM13, it synced ok, but media playing was a pain. I had to clear the music player's data/cache frequently and/or remove the pairing and start form scratch all over again

On stock roms it works fine, both on the regular chinese branch and on the "international" 3.9.6

Thanks for your work

Quote:

---

Originariamente inviato da paolothlw8

yes, same problem on nx505j with CM14.0 and CM14.1
I solved this issue some time ago by doing a little patch to the SensorManager
apply this patch in frameworks/base: sensors.diff and recompile, after this the sensor should work

---

Can not download it?

Quote:

---

Originariamente inviato da awssong

Can not download it?

---

link works fine, I just tried now

Quote:

---

Originariamente inviato da paolothlw8

yes, same problem on nx505j with CM14.0 and CM14.1
I solved this issue some time ago by doing a little patch to the SensorManager
apply this patch in frameworks/base: sensors.diff and recompile, after this the sensor should work

---

Thanks, Paolo, the patch works!

Quote:

---

Originariamente inviato da seth09

Thanks, Paolo, the patch works!

---

With what command to restore the PAOLO provided by the patch? Thank you

Quote:

---

Originariamente inviato da awssong

With what command to restore the PAOLO provided by the patch? Thank you

---

codice:

---

git apply -R sensors.diff
or
patch -R -p1 < sensors.diff

---

Hi, @paolothlw8! Thanks for your work. I tried to install your rom a couple of times without issues until I rebooted the phone, then it would get stuck at the CG logo and never boot up, so I had to reboot to recovery and get my RR nand back...

I fully wiped before installing (data, cache, dalvik and system). I don't know what might have gone wrong... Could anyone help? Thanks

Quote:

---

Originariamente inviato da inhalt

Hi, @paolothlw8! Thanks for your work. I tried to install your rom a couple of times without issues until I rebooted the phone, then it would get stuck at the CG logo and never boot up, so I had to reboot to recovery and get my RR nand back...

I fully wiped before installing (data, cache, dalvik and system). I don't know what might have gone wrong... Could anyone help? Thanks

---

you also have used the gapps 7.1 version or still using the 7.0 ?

Yes, I used the 7.1 arm nano gapps

Quote:

---

Originariamente inviato da inhalt

Yes, I used the 7.1 arm nano gapps

---

with the cm14.0 you have the same issue ?
if not you can try to install the cm14.0 and update to the cm14.1 without the full wipe

Quote:

---

Originariamente inviato da paolothlw8

with the cm14.0 you have the same issue ?
if not you can try to install the cm14.0 and update to the cm14.1 without the full wipe

---

I didn't try 14.0 but will try this way you say the next time I flash it. Thanks :)

I think the problem was SuperSU. I had it installed the previous times when the problem occurred. I tried to flash again without installing it afterwards and rebooted several times without a problem...
So there must be some kind of incompatibility with this build and SuperSU that will make you flash the rom all over again.

Hi, i want to ask you if you can make cm-14.0 for ZTE Z5 mini (Nx402 or Nx40x), or help me, since i was testing a few customs rom on my device ZTE Z5 mini (NX402) and when i flash these roms in around 5 minutes it shows no signal but it recognize the simcard, i mean that i can access the simcard and i can see also the operator, but it says "Only emergency calls", a then when i return to my previous rom, also custom but 4.4.4, i can make calls without any problem, please help me with this, we are a comunity of users with this device and we don´t know how port CM14 to this device, i will apreciate, thanks and sorry for my poor english.

Quote:

---

Originariamente inviato da inhalt

I think the problem was SuperSU. I had it installed the previous times when the problem occurred. I tried to flash again without installing it afterwards and rebooted several times without a problem...
So there must be some kind of incompatibility with this build and SuperSU that will make you flash the rom all over again.

---

why you use supersu ? :)
root is already present in rom, you just need to enable it in developer options

Quote:

---

Originariamente inviato da osavigne

Hi, i want to ask you if you can make cm-14.0 for ZTE Z5 mini (Nx402 or Nx40x), or help me, since i was testing a few customs rom on my device ZTE Z5 mini (NX402) and when i flash these roms in around 5 minutes it shows no signal but it recognize the simcard, i mean that i can access the simcard and i can see also the operator, but it says "Only emergency calls", a then when i return to my previous rom, also custom but 4.4.4, i can make calls without any problem, please help me with this, we are a comunity of users with this device and we don´t know how port CM14 to this device, i will apreciate, thanks and sorry for my poor english.

---

I answered you in PM

I still can't edit the first message -.-
so for now I write here, tomorrow I will open a new thread:

CM14.1 (beta2)



Changelog:

• 11/11/2016 beta2 (MD5: de24780ba73c5ffc3590e1b31c4f197f)
  
  • due to some recent changes to the phone DB the upgrade from a previous version (beta1 or older) may not work (FC android.phone and not detect the sim). in this case you must do the full wipe and reflash.
  • Security patch November 2016
  • kernel: some security patch
  • proprietary blobs updated from latest stock firmware 3.89 (with new camera blobs)
  • sync cyanogen source code (11/11/2016)

Hi Paolo!! I had to go back to RR rom from your 14.1 beta1 cause the touch screen would stop working randomly and made me reboot like twice a day...

Now I'm up to trying your beta2 and so far so good :) Will report any issues as they happen. Cheers!

Niice, for a while this rom was working even better than my older Cm14.1 Lg G5 :D, I'll test it now !

Hi, i´m trying to make a CM-13.0 for my nx402 (ZTE Z5 mini), and i´m getting this error:

make: *** No rule to make target '/home/otto/android/system/out/target/product/nx402/obj/SHARED_LIBRARIES/libril_intermediates/export_includes', needed to '/home/otto/android/system/out/target/product/nx402/obj/EXECUTABLES/rild_intermediates/import_includes'. Stop.

What can it be, i already do a few times a repo sync and a make clean and nothing, any sugestions?

I want to make also a CM14.1 for this device, but i get this also:

build/core/binary.mk:1231: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1231: external/pdfium/third_party/pdfiumbigint . mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
build/core/package_internal . mk:143: Empty argument supplied to find-subdir-assets
find: «/home/otto/android/system/out/target/common/obj/SHARED_LIBRARIES/libwifi-hal-mock_intermediates»: No existe el archivo o el directorio
build/core/package_internal . mk:143: Empty argument supplied to find-subdir-assets
./packages/apps/Settings/Android . mk:3: *** missing separator.
build/core/ninja.mk:166: fallo en las instrucciones para el objetivo '/home/otto/android/system/out/build-cm_nx402 . ninja'
make: *** [/home/otto/android/system/out/build-cm_nx402 . ninja] Error 1

Please help me mates, i´m new on this stuff, thanks

Quote:

---

Originariamente inviato da PaoloW8

I still can't edit the first message -.-
so for now I write here, tomorrow I will open a new thread:

CM14.1 (beta2)



Changelog:

• 11/11/2016 beta2 (MD5: de24780ba73c5ffc3590e1b31c4f197f)
  
  • due to some recent changes to the phone DB the upgrade from a previous version (beta1 or older) may not work (FC android.phone and not detect the sim). in this case you must do the full wipe and reflash.
  • Security patch November 2016
  • kernel: some security patch
  • proprietary blobs updated from latest stock firmware 3.89 (with new camera blobs)
  • sync cyanogen source code (11/11/2016)

---

Device tree code uploaded yet?Look forward to。

Quote:

---

Originariamente inviato da awssong

Device tree code uploaded yet?Look forward to。

---

lol no, I completely forgot :)
give me 10 minutes and I will update all

edit:
done

Hello. as firmware situation with playback of music via stereo bluetooth headset?

Quote:

---

Originariamente inviato da PaoloW8

lol no, I completely forgot :)
give me 10 minutes and I will update all

edit:
done

---

Suitable for CM14. 1 where is the new camera setup?

Quote:

---

Originariamente inviato da awssong

Suitable for CM14. 1 where is the new camera setup?

---

the camera.apk ?
It doesn't work on Android 7, I'm trying to do the port.

Quote:

---

Originariamente inviato da PaoloW8

the camera.apk ?
It doesn't work on Android 7, I'm trying to do the port.

---

oh ,Thanks paolo!

Hi Paolo, did cm14.1 officially fix the camera recording problem? Or you just applied some additional patches to fix it? Thanks.

Quote:

---

Originariamente inviato da seth09

Hi Paolo, did cm14.1 officially fix the camera recording problem? Or you just applied some additional patches to fix it? Thanks.

---

the fix is official and already merged in the cm14.1 source code

Hi Paolo, currently I’m porting the proprietary files to z7mini. I noticed that some files are different from those of official ROM, indicating they are probably from somewhere else. Can I assume these files (as well as those missing in official rom) should also be able to work with Z7mini safely? Thanks.

Files different from official rom:

codice:

---

bin\hci_qcomm_init
bin\qseecomd
lib\libSFB.so
vendor\lib\drm\libdrmwvmplugin.so
vendor\lib\egl\eglsubAndroid.so
vendor\lib\egl\libEGL_adreno.so
vendor\lib\egl\libGLESv1_CM_adreno.so
vendor\lib\egl\libGLESv2_adreno.so
vendor\lib\egl\libq3dtools_adreno.so
vendor\lib\mediadrm\libwvdrmengine.so
vendor\lib\libadreno_utils.so
vendor\lib\libbccQTI.so
vendor\lib\libC2D2.so
vendor\lib\libc2d30-a3xx.so
vendor\lib\libCB.so
vendor\lib\libdrmdiag.so
vendor\lib\libdrmfs.so
vendor\lib\libdrmtime.so
vendor\lib\libgsl.so
vendor\lib\libllvm-qcom.so
vendor\lib\libOpenCL.so
vendor\lib\libQSEEComAPI.so
vendor\lib\libril-qc-qmi-1.so
vendor\lib\librpmb.so
vendor\lib\librs_adreno.so
vendor\lib\librs_adreno_sha1.so
vendor\lib\libRSDriver_adreno.so
vendor\lib\libsc-a3xx.so
vendor\lib\libscale.so
vendor\lib\libssd.so
vendor\lib\libwvdrm_L3.so
vendor\lib\libwvm.so
vendor\lib\libWVStreamControlAPI_L3.so

---

Files missing in official rom:

codice:

---

lib\libcurl_camera.so
lib\libmorpho_image_converter.so
lib\libmorpho_jpeg_io.so
lib\libmorpho_memory_allocator.so
lib\libmorpho_strobe_photo_jni.so
vendor\lib\libdrmdecrypt.so
vendor\lib\libuiblur.so
vendor\lib\libWVphoneAPI.so

---

Quote:

---

Originariamente inviato da seth09

Hi Paolo, currently I’m porting the proprietary files to z7mini. I noticed that some files are different from those of official ROM, indicating they are probably from somewhere else. Can I assume these files (as well as those missing in official rom) should also be able to work with Z7mini safely? Thanks.

---

They are the adreno and drm driver, I took them from the bacon (oneplus one) firmware
yes, should also work on the z7mini

Can someone help me to port CM14.1 to Z5 Mini, i´m trying but getting a lot of errors?, Thanks for the help

After installing Open GApps (Stock package, including launcher, contacts, dialer etc.), is it safe if I remove Cyanogenmod's Trebuchet launcher, official contacts, dialer, AudioFX etc. from ROM ?

Quote:

---

Originariamente inviato da patwwh

After installing Open GApps (Stock package, including launcher, contacts, dialer etc.), is it safe if I remove Cyanogenmod's Trebuchet launcher, official contacts, dialer, AudioFX etc. from ROM ?

---

I don't know, never tried

link cm14.1_beta3

changelog:
26/11/2016 beta3 (MD5: 3a54ca612bb36dcdf90328cd00507211)

• kernel: few fix
• sync cyanogen source code (26/11/2016)

Quote:

---

Originariamente inviato da PaoloW8

link cm14.1_beta3

changelog:
26/11/2016 beta3 (MD5: 3a54ca612bb36dcdf90328cd00507211)

• kernel: few fix
• sync cyanogen source code (26/11/2016)

---

[ 52% 18064/34481] Download: /home/sya...rmediates/org.cyanogenmod.gello-40.apk
FAILED: /bin/bash -c "(mvn -q org.apache.maven.plugins:maven-dependency-plugin:2.10:get org.apache.maven.plugins:maven-dependency-plugin:2.10:copy -DremoteRepositories=central::::https://maven.cyanogenmod.org/artifa...ello_prebuilds -Dartifact=org.cyanogenmod:gello:40:apk -Dmdep.prependGroupId=true -Dmdep.overWriteSnapshots=true -Dmdep.overWriteReleases=true -Dtransitive=false -DoutputDirectory=/home/syai2012/rom/suda3/out/target/common/obj/APPS/Gello_intermediates/ )"
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-dependency-plugin:2.10:get (default-cli) on project standalone-pom: Couldn't download artifact: Could not transfer artifact org.cyanogenmod:gello:apk:40 from/to central (https://maven.cyanogenmod.org/artifa...lo_prebuilds): sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderE xception: unable to find valid certification path to requested target
[ERROR] org.cyanogenmod:gello:apk:40
[ERROR]
[ERROR] from the specified remote repositories:
[ERROR] central (https://repo.maven.apache.org/maven2, releases=true, snapshots=false),
[ERROR] central (https://maven.cyanogenmod.org/artifa...ello_prebuilds, releases=true, snapshots=true)
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/d...utionException
[ 52% 18064/34481] target R.java/Manif...PS/LatinIME_intermediates/src/R.stamp)
Warning: AndroidManifest.xml already defines minSdkVersion (in http://schemas.android.com/apk/res/android); using existing value in manifest.
Warning: AndroidManifest.xml already defines targetSdkVersion (in http://schemas.android.com/apk/res/android); using existing value in manifest.
[ 52% 18064/34481] Building with Jack:...l_intermediates/with-local/classes.dex
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1

#### make failed to build some targets (01:06:46 (hh:mm:ss)) ####

Quote:

---

Originariamente inviato da PaoloW8

link cm14.1_beta3

changelog:
26/11/2016 beta3 (MD5: 3a54ca612bb36dcdf90328cd00507211)

• kernel: few fix
• sync cyanogen source code (26/11/2016)

---

The problem out in the compilation of Gello, the shield will be able to compile it, how do you solve the problem?
# Browser
PRODUCT_PACKAGES += \
#Gello

# Filesystem
PRODUCT_PACKAGES += \
make_ext4fs

gello is a precompiled apk
when you compile the full rom gello.apk is downloaded from the cyanogen server so a internet connection is required during the compile process.

Thank you paolo, managed to build RR N today thanks to you. Most stuff works fine, which is surpising considering cm14.1 hit official status just 15 days ago. Had to use a memory patch to java to build with my meager 8gb of ram :) . The only thing i noticed is that photos taken from the front camera are inverted(mirrored). New module-less kernel works great.

Simple question: Can i make marshmallow build with openjdk-8? I have to remove 7 completely because i had errors with compiling Nougat.

Quote:

---

Originariamente inviato da pchatzop

Thank you paolo, managed to build RR N today thanks to you. Most stuff works fine, which is surpising considering cm14.1 hit official status just 15 days ago. Had to use a memory patch to java to build with my meager 8gb of ram :) . The only thing i noticed is that photos taken from the front camera are inverted(mirrored). New module-less kernel works great.

Simple question: Can i make marshmallow build with openjdk-8? I have to remove 7 completely because i had errors with compiling Nougat.

---

sure, I compile the cm13.0 with openjdk-8 without problem
you can add this line in your <home>/.profile file:

codice:

---

export EXPERIMENTAL_USE_JAVA8=true

---

(or write in your terminal before the brunch command)

Quote:

---

Originariamente inviato da PaoloW8

link cm14.1_beta3

changelog:
26/11/2016 beta3 (MD5: 3a54ca612bb36dcdf90328cd00507211)

• kernel: few fix
• sync cyanogen source code (26/11/2016)

---

Hi, Paolo!
On CM14.1 my phone have the same problem as CM13 - phone call disconnected after few minute.
CM12.1 - no problems/