CERCA
PER MODELLO
FullScreen Chatbox! :)

Utente del giorno: 9mm con ben 2 Thanks ricevuti nelle ultime 24 ore
Utente della settimana: 9mm con ben 17 Thanks ricevuti negli ultimi sette giorni
Utente del mese: 9mm con ben 131 Thanks ricevuti nell'ultimo mese

Pagina 3 di 14 primaprima 1234513 ... ultimoultimo
Ultima pagina
Visualizzazione dei risultati da 21 a 30 su 139
Discussione:

Mediacom Pad phone Duo g530 root and cwm 6.0.3.0

Se questa discussione ti è stata utile, ti preghiamo di lasciare un messaggio di feedback in modo che possa essere preziosa in futuro anche per altri utenti come te!
  1. #21
    Androidiano


    Registrato dal
    Nov 2012
    Messaggi
    246

    Ringraziamenti
    21
    Ringraziato 10 volte in 10 Posts
    Predefinito

    ecco ... questa e con l sd card 1

    Microsoft Windows XP [Versione 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Edo>cd C:\root_g530\

    C:\root_g530>adb push recovery_pad_g530.img/storage/sdcard1/
    Android Debug Bridge version 1.0.29

    -d - directs command to the only connected USB devic
    e
    returns an error if more than one USB device is
    present.
    -e - directs command to the only running emulator.
    returns an error if more than one emulator is r
    unning.
    -s <serial number> - directs command to the USB device or emulator w
    ith
    the given serial number. Overrides ANDROID_SERI
    AL
    environment variable.
    -p <product name or path> - simple product name like 'sooner', or
    a relative/absolute path to a product
    out directory like 'out/target/product/sooner'.

    If -p is not specified, the ANDROID_PRODUCT_OUT

    environment variable is used, which must
    be an absolute path.
    devices - list all connected devices
    connect <host>[:<port>] - connect to a device via TCP/IP
    Port 5555 is used by default if no port number
    is specified.
    disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
    Port 5555 is used by default if no port number
    is specified.
    Using this command with no additional arguments

    will disconnect from all connected TCP/IP devic
    es.

    device commands:
    adb push <local> <remote> - copy file/dir to device
    adb pull <remote> [<local>] - copy file/dir from device
    adb sync [ <directory> ] - copy host->device only if changed
    (-l means list but don't copy)
    (see 'adb help all')
    adb shell - run remote shell interactively
    adb shell <command> - run remote shell command
    adb emu <command> - run emulator console command
    adb logcat [ <filter-spec> ] - View device log
    adb forward <local> <remote> - forward socket connections
    forward specs are one of:
    tcp:<port>
    localabstract:<unix domain socket name>
    localreserved:<unix domain socket name>
    localfilesystem:<unix domain socket name>
    dev:<character device name>
    jdwp:<process pid> (remote only)
    adb jdwp - list PIDs of processes hosting a JDWP transport

    adb install [-l] [-r] [-s] <file> - push this package file to the device and i
    nstall it
    ('-l' means forward-lock the app)
    ('-r' means reinstall the app, keeping its data
    )
    ('-s' means install on SD card instead of inter
    nal storage)
    adb uninstall [-k] <package> - remove this app package from the device
    ('-k' means keep the data and cache directories
    )
    adb bugreport - return all information from the device
    that should be included in a bug report.

    adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
    stem] [<packages...>]
    - write an archive of the device's data to <file>
    .
    If no -f option is supplied then the data is wr
    itten
    to "backup.ab" in the current directory.
    (-apk|-noapk enable/disable backup of the .apks
    themselves
    in the archive; the default is noapk.)
    (-shared|-noshared enable/disable backup of the
    device's
    shared storage / SD card contents; the defau
    lt is noshared.)
    (-all means to back up all installed applicatio
    ns)
    (-system|-nosystem toggles whether -all automat
    ically includes
    system applications; the default is to inclu
    de system apps)
    (<packages...> is the list of applications to b
    e backed up. If
    the -all or -shared flags are passed, then t
    he package
    list is optional. Applications explicitly g
    iven on the
    command line will be included even if -nosys
    tem would
    ordinarily cause them to be omitted.)

    adb restore <file> - restore device contents from the <file> backup
    archive

    adb help - show this help message
    adb version - show version num

    scripting:
    adb wait-for-device - block until device is online
    adb start-server - ensure that there is a server running
    adb kill-server - kill the server if it is running
    adb get-state - prints: offline | bootloader | device
    adb get-serialno - prints: <serial-number>
    adb status-window - continuously print device status for a specifie
    d device
    adb remount - remounts the /system partition on the device re
    ad-write
    adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
    tloader or recovery program
    adb reboot-bootloader - reboots the device into the bootloader
    adb root - restarts the adbd daemon with root permissions
    adb usb - restarts the adbd daemon listening on USB
    adb tcpip <port> - restarts the adbd daemon listening on TCP on th
    e specified port
    networking:
    adb ppp <tty> [parameters] - Run PPP over USB.
    Note: you should not automatically start a PPP connection.
    <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
    [parameters] - Eg. defaultroute debug dump local notty usepeerdns

    adb sync notes: adb sync [ <directory> ]
    <localdir> can be interpreted in several ways:

    - If <directory> is not specified, both /system and /data partitions will be u
    pdated.

    - If it is "system" or "data", only the corresponding partition
    is updated.

    environmental variables:
    ADB_TRACE - Print debug information. A comma separated list
    of the following values
    1 or all, adb, sockets, packets, rwx, usb, sync
    , sysdeps, transport, jdwp
    ANDROID_SERIAL - The serial number to connect to. -s takes prior
    ity over this if given.
    ANDROID_LOG_TAGS - When used with the logcat option, only these de
    bug tags are printed.

    C:\root_g530>adb shell
    shell@android:/ $ su
    su
    root@android:/ # dd if=/storage/sdcard1/recovery_pad_g530.img of=/dev/recovery
    _pad_g530.img of=/dev/recovery <
    /storage/sdcard1/recovery_pad_g530.img: cannot open for read: No such file or di
    rectory
    1|root@android:/ # sync
    sync
    root@android:/ # sync
    sync
    root@android:/ # sync
    sync
    root@android:/ # reboot recovery
    reboot recovery

    C:\root_g530>

  2.  
  3. #22
    Senior Droid L'avatar di effeci2


    Registrato dal
    Jul 2012
    Località
    Sicilia
    Messaggi
    840
    Smartphone
    Wiko Rainbow Jam -Vodafone 875

    Ringraziamenti
    53
    Ringraziato 232 volte in 153 Posts
    Predefinito

    Prova con
    adb push nomefile.img /cartella/sottocartella/nomefile.img

    cioè metti il nome del file della recovery anche alla fine del comando
    Wiko Rainbow Jam MTK6580 Lollipop 5.1 - Wiko Iggy MTK6572 JB 4.2.2 - Mediacom Smartpad 722Mobile MTK6582 JB 4.2.2 - Mediacom Smartpad 706 Allwinner JB 4.1.1 by effeci2 - Mediacom Smartpad 720 e 722 Amlogic ICS 4.0.4 - Dicra Tab208 CyanogenMod 10 JB 4.1.1

  4. #23
    Androidiano


    Registrato dal
    Nov 2012
    Messaggi
    246

    Ringraziamenti
    21
    Ringraziato 10 volte in 10 Posts
    Predefinito

    provato .. non capisco il problema di tutto ciò..

    Microsoft Windows XP [Versione 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Edo>cd C:\root_g530\

    C:\root_g530>adb push recovery_pad_g530/storage/sdcard0/recovery_pad_g530.img
    Android Debug Bridge version 1.0.29

    -d - directs command to the only connected USB devic
    e
    returns an error if more than one USB device is
    present.
    -e - directs command to the only running emulator.
    returns an error if more than one emulator is r
    unning.
    -s <serial number> - directs command to the USB device or emulator w
    ith
    the given serial number. Overrides ANDROID_SERI
    AL
    environment variable.
    -p <product name or path> - simple product name like 'sooner', or
    a relative/absolute path to a product
    out directory like 'out/target/product/sooner'.

    If -p is not specified, the ANDROID_PRODUCT_OUT

    environment variable is used, which must
    be an absolute path.
    devices - list all connected devices
    connect <host>[:<port>] - connect to a device via TCP/IP
    Port 5555 is used by default if no port number
    is specified.
    disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
    Port 5555 is used by default if no port number
    is specified.
    Using this command with no additional arguments

    will disconnect from all connected TCP/IP devic
    es.

    device commands:
    adb push <local> <remote> - copy file/dir to device
    adb pull <remote> [<local>] - copy file/dir from device
    adb sync [ <directory> ] - copy host->device only if changed
    (-l means list but don't copy)
    (see 'adb help all')
    adb shell - run remote shell interactively
    adb shell <command> - run remote shell command
    adb emu <command> - run emulator console command
    adb logcat [ <filter-spec> ] - View device log
    adb forward <local> <remote> - forward socket connections
    forward specs are one of:
    tcp:<port>
    localabstract:<unix domain socket name>
    localreserved:<unix domain socket name>
    localfilesystem:<unix domain socket name>
    dev:<character device name>
    jdwp:<process pid> (remote only)
    adb jdwp - list PIDs of processes hosting a JDWP transport

    adb install [-l] [-r] [-s] <file> - push this package file to the device and i
    nstall it
    ('-l' means forward-lock the app)
    ('-r' means reinstall the app, keeping its data
    )
    ('-s' means install on SD card instead of inter
    nal storage)
    adb uninstall [-k] <package> - remove this app package from the device
    ('-k' means keep the data and cache directories
    )
    adb bugreport - return all information from the device
    that should be included in a bug report.

    adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
    stem] [<packages...>]
    - write an archive of the device's data to <file>
    .
    If no -f option is supplied then the data is wr
    itten
    to "backup.ab" in the current directory.
    (-apk|-noapk enable/disable backup of the .apks
    themselves
    in the archive; the default is noapk.)
    (-shared|-noshared enable/disable backup of the
    device's
    shared storage / SD card contents; the defau
    lt is noshared.)
    (-all means to back up all installed applicatio
    ns)
    (-system|-nosystem toggles whether -all automat
    ically includes
    system applications; the default is to inclu
    de system apps)
    (<packages...> is the list of applications to b
    e backed up. If
    the -all or -shared flags are passed, then t
    he package
    list is optional. Applications explicitly g
    iven on the
    command line will be included even if -nosys
    tem would
    ordinarily cause them to be omitted.)

    adb restore <file> - restore device contents from the <file> backup
    archive

    adb help - show this help message
    adb version - show version num

    scripting:
    adb wait-for-device - block until device is online
    adb start-server - ensure that there is a server running
    adb kill-server - kill the server if it is running
    adb get-state - prints: offline | bootloader | device
    adb get-serialno - prints: <serial-number>
    adb status-window - continuously print device status for a specifie
    d device
    adb remount - remounts the /system partition on the device re
    ad-write
    adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
    tloader or recovery program
    adb reboot-bootloader - reboots the device into the bootloader
    adb root - restarts the adbd daemon with root permissions
    adb usb - restarts the adbd daemon listening on USB
    adb tcpip <port> - restarts the adbd daemon listening on TCP on th
    e specified port
    networking:
    adb ppp <tty> [parameters] - Run PPP over USB.
    Note: you should not automatically start a PPP connection.
    <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
    [parameters] - Eg. defaultroute debug dump local notty usepeerdns

    adb sync notes: adb sync [ <directory> ]
    <localdir> can be interpreted in several ways:

    - If <directory> is not specified, both /system and /data partitions will be u
    pdated.

    - If it is "system" or "data", only the corresponding partition
    is updated.

    environmental variables:
    ADB_TRACE - Print debug information. A comma separated list
    of the following values
    1 or all, adb, sockets, packets, rwx, usb, sync
    , sysdeps, transport, jdwp
    ANDROID_SERIAL - The serial number to connect to. -s takes prior
    ity over this if given.
    ANDROID_LOG_TAGS - When used with the logcat option, only these de
    bug tags are printed.

    C:\root_g530>adb shell
    shell@android:/ $ su
    su
    root@android:/ # dd if=/storage/sdcard0/recovery_pad_g530.img of=/dev/recovery
    _pad_g530.img of=/dev/recovery <
    /storage/sdcard0/recovery_pad_g530.img: cannot open for read: No such file or di
    rectory
    1|root@android:/ #

  5. #24
    Senior Droid L'avatar di vocoderism


    Registrato dal
    Sep 2013
    Messaggi
    482

    Ringraziamenti
    49
    Ringraziato 140 volte in 97 Posts
    Predefinito

    Quote Originariamente inviato da Giorgio1325 Visualizza il messaggio
    provato .. non capisco il problema di tutto ciò..

    Microsoft Windows XP [Versione 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Edo>cd C:\root_g530\

    C:\root_g530>adb push recovery_pad_g530/storage/sdcard0/recovery_pad_g530.img
    Android Debug Bridge version 1.0.29

    -d - directs command to the only connected USB devic
    e
    returns an error if more than one USB device is
    present.
    -e - directs command to the only running emulator.
    returns an error if more than one emulator is r
    unning.
    -s <serial number> - directs command to the USB device or emulator w
    ith
    the given serial number. Overrides ANDROID_SERI
    AL
    environment variable.
    -p <product name or path> - simple product name like 'sooner', or
    a relative/absolute path to a product
    out directory like 'out/target/product/sooner'.

    If -p is not specified, the ANDROID_PRODUCT_OUT

    environment variable is used, which must
    be an absolute path.
    devices - list all connected devices
    connect <host>[:<port>] - connect to a device via TCP/IP
    Port 5555 is used by default if no port number
    is specified.
    disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
    Port 5555 is used by default if no port number
    is specified.
    Using this command with no additional arguments

    will disconnect from all connected TCP/IP devic
    es.

    device commands:
    adb push <local> <remote> - copy file/dir to device
    adb pull <remote> [<local>] - copy file/dir from device
    adb sync [ <directory> ] - copy host->device only if changed
    (-l means list but don't copy)
    (see 'adb help all')
    adb shell - run remote shell interactively
    adb shell <command> - run remote shell command
    adb emu <command> - run emulator console command
    adb logcat [ <filter-spec> ] - View device log
    adb forward <local> <remote> - forward socket connections
    forward specs are one of:
    tcp:<port>
    localabstract:<unix domain socket name>
    localreserved:<unix domain socket name>
    localfilesystem:<unix domain socket name>
    dev:<character device name>
    jdwp:<process pid> (remote only)
    adb jdwp - list PIDs of processes hosting a JDWP transport

    adb install [-l] [-r] [-s] <file> - push this package file to the device and i
    nstall it
    ('-l' means forward-lock the app)
    ('-r' means reinstall the app, keeping its data
    )
    ('-s' means install on SD card instead of inter
    nal storage)
    adb uninstall [-k] <package> - remove this app package from the device
    ('-k' means keep the data and cache directories
    )
    adb bugreport - return all information from the device
    that should be included in a bug report.

    adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
    stem] [<packages...>]
    - write an archive of the device's data to <file>
    .
    If no -f option is supplied then the data is wr
    itten
    to "backup.ab" in the current directory.
    (-apk|-noapk enable/disable backup of the .apks
    themselves
    in the archive; the default is noapk.)
    (-shared|-noshared enable/disable backup of the
    device's
    shared storage / SD card contents; the defau
    lt is noshared.)
    (-all means to back up all installed applicatio
    ns)
    (-system|-nosystem toggles whether -all automat
    ically includes
    system applications; the default is to inclu
    de system apps)
    (<packages...> is the list of applications to b
    e backed up. If
    the -all or -shared flags are passed, then t
    he package
    list is optional. Applications explicitly g
    iven on the
    command line will be included even if -nosys
    tem would
    ordinarily cause them to be omitted.)

    adb restore <file> - restore device contents from the <file> backup
    archive

    adb help - show this help message
    adb version - show version num

    scripting:
    adb wait-for-device - block until device is online
    adb start-server - ensure that there is a server running
    adb kill-server - kill the server if it is running
    adb get-state - prints: offline | bootloader | device
    adb get-serialno - prints: <serial-number>
    adb status-window - continuously print device status for a specifie
    d device
    adb remount - remounts the /system partition on the device re
    ad-write
    adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
    tloader or recovery program
    adb reboot-bootloader - reboots the device into the bootloader
    adb root - restarts the adbd daemon with root permissions
    adb usb - restarts the adbd daemon listening on USB
    adb tcpip <port> - restarts the adbd daemon listening on TCP on th
    e specified port
    networking:
    adb ppp <tty> [parameters] - Run PPP over USB.
    Note: you should not automatically start a PPP connection.
    <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
    [parameters] - Eg. defaultroute debug dump local notty usepeerdns

    adb sync notes: adb sync [ <directory> ]
    <localdir> can be interpreted in several ways:

    - If <directory> is not specified, both /system and /data partitions will be u
    pdated.

    - If it is "system" or "data", only the corresponding partition
    is updated.

    environmental variables:
    ADB_TRACE - Print debug information. A comma separated list
    of the following values
    1 or all, adb, sockets, packets, rwx, usb, sync
    , sysdeps, transport, jdwp
    ANDROID_SERIAL - The serial number to connect to. -s takes prior
    ity over this if given.
    ANDROID_LOG_TAGS - When used with the logcat option, only these de
    bug tags are printed.

    C:\root_g530>adb shell
    shell@android:/ $ su
    su
    root@android:/ # dd if=/storage/sdcard0/recovery_pad_g530.img of=/dev/recovery
    _pad_g530.img of=/dev/recovery <
    /storage/sdcard0/recovery_pad_g530.img: cannot open for read: No such file or di
    rectory
    1|root@android:/ #


    Sbagli comando lanci
    adb push recovery_pad_g530/storage/sdcard0/recovery_pad_g530.img

    Invece devi lanciare

    adb push recovery_pad_g530.img /storage/sdcard0/


    Poi fai il resto

  6. #25
    Androidiano


    Registrato dal
    Nov 2012
    Messaggi
    246

    Ringraziamenti
    21
    Ringraziato 10 volte in 10 Posts
    Predefinito

    No non ho sbagliato .. Ho provato con il comando che mi aveva consigliato effeci2

  7. #26
    Senior Droid L'avatar di vocoderism


    Registrato dal
    Sep 2013
    Messaggi
    482

    Ringraziamenti
    49
    Ringraziato 140 volte in 97 Posts
    Predefinito

    Quote Originariamente inviato da Giorgio1325 Visualizza il messaggio
    No non ho sbagliato .. Ho provato con il comando che mi aveva consigliato effeci2
    Copia il comando come te l ho inviato ora e poi fai il resto

  8. #27
    Senior Droid L'avatar di effeci2


    Registrato dal
    Jul 2012
    Località
    Sicilia
    Messaggi
    840
    Smartphone
    Wiko Rainbow Jam -Vodafone 875

    Ringraziamenti
    53
    Ringraziato 232 volte in 153 Posts
    Predefinito

    Giorgio
    Dal pc leggo meglio....sbagli perche' scrivi tutto attaccato.
    dopo _g530 ci deve essere uno spazio prima di /storage/sdcard0/
    adb push recovery_pad_g530 /storage/sdcard0/recovery_pad_g530.img
    e
    adb push recovery_pad_g530 /storage/sdcard0/
    sono equivalenti come comandi, il primo e' piu' prolisso...
    Wiko Rainbow Jam MTK6580 Lollipop 5.1 - Wiko Iggy MTK6572 JB 4.2.2 - Mediacom Smartpad 722Mobile MTK6582 JB 4.2.2 - Mediacom Smartpad 706 Allwinner JB 4.1.1 by effeci2 - Mediacom Smartpad 720 e 722 Amlogic ICS 4.0.4 - Dicra Tab208 CyanogenMod 10 JB 4.1.1

  9. Il seguente Utente ha ringraziato effeci2 per il post:

    Giorgio1325 (19-09-13)

  10. #28
    Senior Droid L'avatar di vocoderism


    Registrato dal
    Sep 2013
    Messaggi
    482

    Ringraziamenti
    49
    Ringraziato 140 volte in 97 Posts
    Predefinito

    Quote Originariamente inviato da effeci2 Visualizza il messaggio
    Giorgio
    Dal pc leggo meglio....sbagli perche' scrivi tutto attaccato.
    dopo _g530 ci deve essere uno spazio prima di /storage/sdcard0/
    adb push recovery_pad_g530 /storage/sdcard0/recovery_pad_g530.img
    e
    adb push recovery_pad_g530 /storage/sdcard0/
    sono equivalenti come comandi, il primo e' piu' prolisso...
    Corretto
    Dopo g530 metti. img
    Qnd
    adb push recovery_pad_g530.img /storage/sdcard0

  11. Il seguente Utente ha ringraziato vocoderism per il post:

    Giorgio1325 (19-09-13)

  12. #29
    Androidiano


    Registrato dal
    Nov 2012
    Messaggi
    246

    Ringraziamenti
    21
    Ringraziato 10 volte in 10 Posts
    Predefinito

    risolto tutto ci sono riuscito ... grazie a tutti per il tempo che mi avete impiegato

  13. #30
    Androidiano


    Registrato dal
    Nov 2012
    Messaggi
    246

    Ringraziamenti
    21
    Ringraziato 10 volte in 10 Posts
    Predefinito

    adesso ci vuole una bella rom .. qualcuno sa se per caso ce ne in giro??

Pagina 3 di 14 primaprima 1234513 ... ultimoultimo
Ultima pagina

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire risposte
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Torna su
Privacy Policy