ho una huawei k4505 che vedo come modem sotto ttyUSB0 ma il pppd non parte, perche?
Inviato dal mio GT-I9000 usando Androidiani App
Visualizzazione stampabile
ho una huawei k4505 che vedo come modem sotto ttyUSB0 ma il pppd non parte, perche?
Inviato dal mio GT-I9000 usando Androidiani App
trovato l-arcano il ril-daemon non riconosce la chiavetta
pid 83 stray syscall exit
[pid 83] writev(pid 83 stray syscall entry
39, [{"RIL[%s] === ENTER ===\n[%s]: restricted state: old=%d, new=%dERROR: requestGetPreferredNetworkType() failed\n[%s]: return network mode=%d[%s]: new Network Type: %dEnter RIL_Init[%s]: sState=%d\nAT+CPIN?
0+CPIN:SIM PINSIM PUKPH-NET PINREADYgetSIMStatus return: %dEnter queryNetworkSelectionModeAT+COPS?+COPS:response=%d Enter requestQueryNetworkSelectionModerequestQueryNetwor kSelectionMode must never return
error when radio is onAT+CEER+CEER:AT+CREG?+CREGFACILITY: %sAT+CLCK=\"%s\",2+CLCK:ERROR: requestQueryFacilityLock() failed\nEnter requestSetNetworkSelectionAutomatic[%s]: CDMA not supported!AT+COPS=0AT
CLCK=\"%s\",%s,\"%s\",%sAT+CPWD=\"%s\",\"%s\",\"%s \"AT+CSSN=%d,%dAT+CREG=%dmodem early initATE0ATS0=0AT&D1AT+CMEE=1[%s]: screenState=%d\nAT+CREG=2AT+CGREG=2net.gprs.ppp-exit[%s] pppd: no response
%s] pppd reconncetAT+CREG=0AT+CGREG=0ERROR: requestScreenState failed[%s]: match model count=%dNeed rematch modem later!HSPA Data Cardreg RAT: %d -> %d\nAC580E800AT^HDRCSQ^HDRCSQ:Sending stored CSQ va
ues to RILAT+CSQ+CSQ:requestSignalStrength must never return an error when radio is on%dLCR 3.0.0+CGREG:AT+CGREG?+CREG:%xrequestRegistrationSt ate must never return an error when radio is onAT+CUSD=2AT+
FUN?+CFUN:%s[%s]: result=%s[%s]: error=%dAT+CGMMGMM:ERROR: requestBasebandVersion failed\n[%s]: begin pppd state monitor[%s] pppd: exception exited[%s] exit pppdStateLoop, s_pppd_exception=%dAT+CGACT?+
GACT:AT+CGDCONT?+CGDCONT:internetdata state force set to 0AT+COPS=?[%s] operators=%d[%s] break in %davailableunknowncurrentforbidden\326\320\271\372 \322\306\266\257China Mobile\326\320\271\372\265\
47\320\305China Telecom\326\320\271\372\301\252\315\250China Unicom[%s] get oper count=%dERROR - requestQueryAvailableNetworks() failedAT+COPS=1,2,\"%s\"network manual select failed, reset to auto selectAT+CUS
=1,\"%s\",15/proc/addr_kmsg+CTZV:+CTZDST:%s,%s+HTCCTZV:Invalid NITZ line %s\nunsolicitedUSSD %s\nunexpectedUSSD error\nAT+CIMI+CIMI:IMSI is %sinfo: %pget operator form table: %s, %s, %sAT+COPS=3,%d
0requestOperator must not return error when radio is on/sys//idVendorr/idProduct/etc/operator_tableInitial var!Wait device.../sys/class/tty/ttyUSB0Found a device, get idGet device id failed!/sys/class/tt
/ttyACM0tty Device id is: %04X/%04XSearching modem table...E: Not support modem!!!!AT[%s] PPP[%s][%s]: sleep %ds befor open %sopen %s ...Device %s has been opened, fd=%dopening AT interface. retrying...AT er
or %d on at_open\nRe-opening after closeAT+CGSNGSN:AT^MEID^MEID:get meid failed or invalid meid!AT+GSN001234567800123456789012345ATAT handshake failed!!![%s]: oldstate=%d newstate=%d s_closed=%d\n[
s]: sState=%d onOff=%d\n[%s]: not support 'AT+CFUN=0'\nAT+CFUN=1Current modem id is: %sCan not match modem!!![%s] isgsm:%disCardNotSupported: %d[%s]: === END ===onUnsolicited
ma questo ril-deamonj da dove viene??? pistoneone ?? China Unicom??