Se vi può servire ho creato questo file GPS.config con molte guide e devo dire che i miglioramenti sono molti.
FATEMI SAPERE
-come fare:
Spoiler:
PARTE 1
-Copiate tutta la v2
-aprile il file system/etc/GPS.conf
(Se il file non c'é createlo)
-incollate tutto ,sostituendo le stringhe già presenti nel file(sempre se ce ne siano..)
-salvate
- riavviate
PARTE 2 (primo test)
-scaricate dal playstore "GPS fix"
-disattivate tutto tranne rete telefono,GPS, e attivate i dati
(mi raccomando 3g e non wifi!!)
[-vi consiglio vivamente di stare all'aperto per avere delle impostazioni ottimali]
-aprite l'engineer mode
-andate in location/location based service/GPS
-premete su GPS(OFF)
-appena diventa GPS(ON) andate in "VIEW"
(Affianco alla scritta in alto GPS)
-appena 1 o più "puntini"/satelliti diventano verdi,aprite l'app scaricata prima"GPS fix"
-premete su "star fixing"
-appena vi trova controllate che indichi il luogo giusto (se non lo è ripremete su "start fixing")
-riavviate
-v2
Spoiler:
ACCURACY_THRES=8000
C2K_HOST=c2k.pde.com
C2K_PORT=1234
CURRENT_CARRIER=common
DEBUG_LEVEL =3
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
DEFAULT_USER_PLANE=TRUE
ENABLE_XTRA=TRUE
ENABLE_WIPER=1
INTERMEDIATE_POS=0
NTP_SERVER=0.it.pool.ntp.org
NTP_SERVER=1.it.pool.ntp.org
NTP_SERVER=2.it.pool.ntp.org
NTP_SERVER=3.it.pool.ntp.org
QOS_ACCURACY=50
QOS_TIME_OUT_AGPS=95
QOS_TIME_OUT_STANDALONE=80
QosHorizontalThreshold=1000
QosVerticalThreshold=500
REPORT_POSITION_USE_SUPL_REFLOC=1
SUPL_HOST=supl.sonyericsson.com
SUPL_NO_SECURE_PORT=3425
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
#by DEDDROID
#
#funzioni dalla pac-man rom di arc s
#
#
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC=2
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
SENSOR_GYRO_BATCHES_PER_SEC=2
SENSOR_GYRO_SAMPLES_PER_BATCH=5
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
SENSOR_CONTROL_MODE=0
# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
SENSOR_USAGE=1
# Choose sensor provider interface(1=Sensor1 API, 2=Android NDK)
SENSOR_PROVIDER=2
# Bit mask used to define which sensor algorithms are used.
# Setting each bit has the following definition:
# 0x1 - DISABLE_INS_POSITIONING_FILTER
# 0x0 - ENABLE_INS_POSITIONING_FILTER
SENSOR_ALGORITHM_CONFIG_MASK=0x1
################################
# Indoor Positioning Settings
################################
# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
QUIPC_ENABLED = 0
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=1
-changelog:
Spoiler:
V2=
-aggiunte ottimizzazioni sensori prese da Pac-Man ROM per arco s
-qos per precisione
v1.7=
-veloccizzata connessione con i satelliti
-eliminata stringa europea
v1.4=
-correzione doppi valori(x3)
-posizionati i valori in ordine alfabetico
v1.1=
-modificato il server con quello italiano
v1=
-prima realese