[KERNEL] [JB ][JSS15J/JWR66V] hells-Core

[fpg]

Salve a tutti, ecco un ottimo kernel dalla Germania. Dalla versione b30 è solo per Android 4.3. C'è una versione bxx-AOSP per tutte le ROM AOSP (JSS15J) e una versione bxx per le ROM base stock (JWR66V). In fase di test per Android 4.4 KitKat (KK) (cartella: test/hells-Core).


THREAD DI RIFERIMENTO


DOWNLOADS android 4.3 jellybean
****
Qui il link su xda con kernel stock 4.3 e 4.4)

features:

Spoiler:

(b34) fs/sync: Make sync() satisfy many requests with one invocation Revert "input: lge: use the old 100px finger movement code for CPU frequency” Revert "drivers: input: disable onlining the second core on screen touch” Revert "drivers: input: clean up the boospulse call detection funtion." Revert "drivers: input: instead of calling boostpulse every touch input...” lge_touch_core: Simpler method of boosting the cpu frequency on touch intellidemand: Activate Touch Boost ondemand: Set boosfreq to 1242mhz (for Touch Boost) cpufreq: intellidemand: Change optimal_freq to 1242mhz cpufreq: ondemand: Set optimal_freq to 864mhz and sync_freq to 1350mhz intellidemand: Tweak some values delete ("/system/lib/hw/power.msm8960.so"); (im UpdaterScript) msm_fb: display: fix the hang issue caused by solidfill pipe msm_fb: display: add mfd null pointer and mfd panel_power_on checks msm: mdp: Do not wait for vsync for command mode panel msm_fb: Set timeline threshold for command mode to 2 Revert "msm: mdp: Update sync pt. behaviour" msm: display: command mode panel release fence msm: mdp: Update sync pt. behaviour msm: mdp: Change msmfb kworker to kthread intellidemand: Set Optimal-Freq back to 1242mhz (testing) ondemand: Set boostfreq to 1026mhz (1242mhz is maybe to high) intellidemand: Set Sync_Freq backt to 702mhz acpuclock: Deactivate 864mhz Revert "cpufreq: smartmax: Test ideal freq 864mhz (we don't need 1026… ondemand: Set Sync_Freq back to 702mhzsound/soc/codecs/wcd9310.c: expose additional controls (b35) cpufreq: conservative: Enable load tuning (thx myfluxi) (reverted Revert "arm: mako_hotplug: Add intermediate load level" Revert "mako_hotplug: Pull check routine optimizations from franco git" Revert "mako_hotplug: Pull Chalhoubs circular buffer from franco git" Revert "mako_hotplug: Properly set cpu freq policy on suspend/resume" cpufreq: Introduce governor load tuning Revert "mako_hotplug: Resume late from early suspend" Revert "mako-hotplug: Fixup funtion declaration" Revert "arm: mako_hotplug: Stop spamming the kernel log buffer" Revert "arm: mako_hotplug: Unify drivers, Lindent, cleanup interface" Revert "arm: mako_hotplug: Fix section mismatch" Revert "arm: mako_hotplug: Import from francoKernel" ARM: add auto hotplug driver arm: auto hotplug - wrap all pr_info into the existing debug mode so we auto_hotplug: enhancements auto_hotplug: enhancements (rev 2) auto_hotplug: enable the min_online_cpus value auto_hotplug: enhancements (rev 3) auto_hotplug: parameter validation for max_online_cpus auto_hotplug: stack the deck on auto_hotplug_late_resume to get things auto_hotplug: rev 4 - let's lean a little more towards performance. auto_hotplug: Set min cores online to "2" and onlining all cores usin… Revert "cpufreq: interactive: Enable userspace control for load tuning" cpufreq: ondemand: Enable userspace control for load tuning Revert "cpufreq: boost the sampling rate on touch event" cpufreq: boost the sampling rate on touch event config: Activate auto_hotplug Revert "mako: Add support to query cpu status" Revert "msm: pm: Add support to query cpu status" Revert "msm: pm-data: Enable powercollapse/suspend_enabled for non-bo… Revert "msm: pm: Add support for retention on each core" Revert "msm: hotplug: wait for hotplug completion event from secondar… Revert "msm: spm: set vdd directly for current cpu" auto_hotplug: Add suspend_freq auto_hotplug: Tweaks for battery / Allow higher enable_load_threshold… cpufreq: ondemand: Fix the boostpulse interface (again) lge_touch_core: Do not boost touch while suspended Revert "touch_synaptics: Loop until i2c is awake (thx myfluxi)" Revert "touch_synaptics: Add delay to init function" Revert "touch_synaptics: i2c read delay is only needed while suspended" Revert "touch_synaptics: Give i2c a little time to wakeup, fix sweep2… touch_synaptics: Loop until i2c is awake sweep2wake: Cleanup (thx myfluxi) sweep2wake: disable as default for now kernel: cgroup_timer_slack: Adaptations for 3.4 kernel writeback: Fix occasional slow sync(1) binfmt_elf.c: use get_random_int() to fix entropy depleting mmc: msm_sdcc: check for pending_resume in SDCC system suspend (b36) sound control 3.x: Initial GPL release for WCD9310 Audio Codec config: Use XZ instead of GZIP freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes block: cfq: merge tweaked tunables. cpufreq: interactive: Set hispeed_freq to 1026mhz mach-msm: subsystem_restart: Fix CPU detection board_mako: Adjust throttle temp touchscreen: tweak some initialization parameters for better UI response Accuracy Filter Control: export accuracy filter items to userspace input: touchscreen: change filter parameters courtesy of viking37.

ACHTUNG
Né io, né l'autore di questo kernel, né lo staff di Androidiani ci assumiamo la responsabilità per eventuali danni.

[Fabio3105]

inserito il link a questo kernel nel thread https://www.androidiani.com/forum/mo...nexus-4-a.html

[zorginho]

chi lo ha provato? Come sono le prestazioni? ho notato che tra le caratteristiche c'è il faux sound, come lo controllate? Avete comprato l'app di faux sul market?

[fpg]

Qui ho postato qualche risultato (accoppiato a PSX). Devo dire che è tutto molto fluido. Per qualche piccola modifica io uso trickstermod (ho undervoltato il kernel di -250).

[cLLii]

com'è possibile che installando questo kernel b36 con la psx non mi parta il cell? dopo aver fatto wipe cache e dalvik , installo riavvio e poi...si riavvia di continuo o.o..cosa puo essere?

[fpg]

Strano davvero, io uso psx con hells core. Hai scelto la versione aosp?

[ryk]

com'è possibile che installando questo kernel b36 con la psx non mi parta il cell? dopo aver fatto wipe cache e dalvik , installo riavvio e poi...si riavvia di continuo o.o..cosa puo essere?

hai sicuramente flashato la versione sbagliata JWR

[fpg]

B37 is out!

[Wady]

Qualcuno sa se è supportato da touch control?

[maxdelay]

Usate trickster per questo kernel?
Comunque anchio sono su PSX ho messo la 37 AOSP ... risultato bootloop, torno su AK