[KERNEL] [MM] [N4] YaYPrime

[paolocorpo]

Vi presento questo KERNEL (attualmente sul mio N4) per MM su N4

PREMESSA: ne IO ne ANDRODIANI siamo responsabili per eventuali rotture del vostro device determinate da questa guida

Questo kernel è basato su 3.4.0 mr1.1 kernel di google e con l'aggiunta di tutto quanto occorra per renderlo funzionale per MM su N4

THANKS to: yaymalaga

3D su XDA DEVELOPER: QUI

FEATURES

Spoiler:

- Based on official 3.4.0 mr1.1 mako kernel - Compiled using the lastest version of uber 4.9, optimized for cortex-a15 - Anykernel2 - Mako_hotplug as the only hotplug - FranciscoFranco's thermal - FranciscoFranco's gamma control - Frequency limitator on screen-off (1026mhz by default) - Voltage control - Cpu Overclock of 1.7ghz (1.5ghz by default) - Gpu Overlock of 480mhz (400mhz by default) - Ondemand, simple and performance as gpu governors - Ondemand, performance, conservative and interactive as cpu governors - Deadline, zen, fiops, cfq, bfq, row as i/o schedulers - Stratosk's Ondemand governor version (by (default) - Franco's Convervative governor version - Taurus' Interactive governor version - Faux's Sound Control - Readhead set in 512kb by default - Graphite and neon optimizations - Otg support - Kexec (multirom) - DT2W - Fastcharge - A lot of improvements and optimizations

DOWNLOADS
AOSP https://www.androidfilehost.com/?w=files&flid=42219
CM https://www.androidfilehost.com/?w=files&flid=47776

INSTALLAZIONE
If you come from another kernel:
- Reboot in recovery mode
- Dirty-flash the rom you are using (without wipes)
- Flash kernel

If you come from a previous version:
- Reboot in recovery mode
- Flash kernel
(If you find something weird, wipe dalvik/cache)

CHANGELOG

Spoiler:

R3: - Re-done from R1 - Fixes everywhere, no more lags on chrome - Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me) - Merged all patches from 6.0.1 and the latest ones from 3.4 branch - Added cpu underclock to 192mhz (384mhz by default) - Updated interactive governor (ondemand by default) - F2FS support (Need to be tested) - Core optimizations (mutex, futex, sched, etc) - Selinux improvements for smoothness - Cfq i/o scheduler optimized (the other ones are removed until next release) - Added missing Faux soundcontrol commits - Cpu management improvements - DT2W and T2W - CM version added R2: - Compiled using lastest uber 4.9 (compiled by me, optimized for cortex-a15) - Graphite and neon enabled - Makefile and flags optimizations - Compiler and cortex-a15 optimizations - A lot of optimizations in the I/O, and new schedulers: - Row added and tuned up - Deadline updated and tuned up - Cfq updated and tuned up - Bfq (v7-r8) added and tuned up - Zen added and tuned up - Fiops added and tuned up - Kexec support - DT2W support (from Stratosk) - Fastcharge support - OTG support (theoretically) - Interactive governor fixes (now uses lower freq) - Fixes and optimizations for camera, gpu, etc - Some improvements in general R1: - Initial version

Contributors: yaymalaga
Source Code: https://github.com/yaymalaga/yayPrime_kernel

Version Information
Status: Stable

Created 2015-10-25
Last Updated 2016-01-15

[paolocorpo]

Riservato 1

[paolocorpo]

Riservato 2

[paolocorpo]

Uscita versione R3 ed unitamente alla versione AOSP ora c'è anche la versione CM
Changelog della R3:

Re-done from R1
- Fixes everywhere, no more lags on chrome
- Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me)
- Merged all patches from 6.0.1 and the latest ones from 3.4 branch
- Added cpu underclock to 192mhz (384mhz by default)
- Updated interactive governor (ondemand by default)
- F2FS support (Need to be tested)
- Core optimizations (mutex, futex, sched, etc)
- Selinux improvements for smoothness
- Cfq i/o scheduler optimized (the other ones are removed until next release)
- Added missing Faux soundcontrol commits
- Cpu management improvements
- DT2W and T2W
- CM version added

[karlele]

Grazie per l'info...
Che software usi per cambiare i parametri? Va bene quello di Franco?
Gabriele

[paolocorpo]

Grazie per l'info...
Che software usi per cambiare i parametri? Va bene quello di Franco?
Gabriele

DI nulla
Io uso il Trikster MOd, ma credo che quello di Franco (FKUpdater) possa andare altrettanto bene
Così coem potresti provare anche Kernel Adiutor[ (sempre dallo store) spesso consigliato su XDA Developer