No non l'ho fatto per il semplice motiche che sulla xTra ci mette un 15 min per installare una rom. Questo comporta lo scaricamento di mezza batteria e dovrei per forza ricaricarlo. Ma purtroppo se è così dovrei farlo.
Visualizzazione stampabile
Anche se fosse la xTraSmooth ha integrato il franco già. Quindi rimarrebbe comunque un vecchio residuo. L'ideale sarebbe installare il kernel stock e poi il bigbum
Io con questo su purity, rispetto al code blue, non ho notato nessun miglioramento.
Flashato v7 sm, sembra più duraturo
Segnalo intanto che ha reso la v7 ufficiale; così alcuni errori riportati tempo fa non li sentirete più xP
Come avrete notato, da ora ci sarà Sabermod e Linaro
Changelog:
Link al download: ftp://big-bum.uni.cx/misc/N5/L/Quote:
USB stack is now at 3.4.105
FUSE/vfs/fat/fs fixes from 3.5, 3.6 and 3.7
qseecom updates from CM
f2fs updates from upstream
memory optimizations from motorola for our board are now merged with cortex ones
NET is 3.4.105
some video driver updates
selinux fixes
leds fixes
msm camera updates working as it should now
bluetooth is build at -O2 and I have reverted all the changes to stock kernel
enabled all frequencies for the CPU. Battery tests showed no (much) gain, but no loss either. @fabi_92 reported that the phone feels smoother, so it stays this way.
interactive: updates from CM/myfluxi
interactive: added a tunable in which you can choose the way the frequency is calculated (the old way, or the new load-based way). Writing 1 in /sys/devices/system/cpu/cpufreq/interactive/use_cpu_load will enable the new way of calculating the freq.
interactive: added a tunable to set the load threshold if you think the CPU doesn't stay enough in the minimum freq, but I recommend leaving it to 0 or not with it past 10-15.
added smartmax gov by request. It's not tuned and I don't offer support for it, so if you have crashes with it don't post them here.
underclocked GPU idle. The GPU runs at 20MHz now, instead of 27Mhz.
reduced wifi wakelocks
raised the thermal threshold frequency. It now goes down to 1.7GHz instead of 1.5Ghz, then if the cpu is still hot, it will the freq to 1.5GHz instead of 1.2GHz
Makefiles changes: merged some flags from Uber, added some parameters for our CPU, enabled hardfloat for NEON and VFP
mutex, rtmutex, semaphores updates
added tripndroid IO sched
I probably forgot something.
Mirror: https://dl.dropboxusercontent.com/u/...ate/index.html
Fonte xda: [KERNEL] [Qcom MPD] [Linaro / SM / -Ofast] [F2FS] [D2TW / S2W / S2S] big-bum V7 - Post #448 - XDA Forums
Se sbaglio qualcosa, correggimi @big0bum ;)
---
if i make a mistake, correct me
Ma se tecnicamente sono su hells kernel in multirom, e volessi mettere big bum, non essendoci il wipe system, sarebbe da fare un full wipe, right?
non so se è cambiato qualcosa. vedo la stessa dimensione dello zip (non che sia l'unica cosa che conta eh ..)
@big0bum la versione v7 è uguale di quella test v7 dell'altro giorno?
---
version v7 is the same of test version v7 of last day?
che inglese pessimo...mamma mia haha
No. This is what changed from the beta.
===
Questo è ciò che è cambiato dalla beta.
https://github.com/StefanescuCristia...f55...lollipop
Dopo wipe e qualche giorno di utilizzo con xTraSmooth ho notato che siamo un pelino su con i consumi e nonostante ha delle prestazioni e fluidità pessime ha comunque una batteria non duratura rispetto ad altri kernel. Spero in un miglioramento nella v7
La xtrasmoot va lasciata con il kernel stock per avere consumi Ottimali
Che ROM mi consigliate da abbinare a questo kernel?
io lo uso su euphoria...
mi trovo da dio ma vedi tu ovviamente in base ai tuoi gusti
io cataclysm, anche se adesso viaggio con il kernel stock per un pochetto per vedere di risolvere wake vari e vedere reali differenze, comunque la v7 è molto parsimoniosa
v8 disponibile nella cartella di test : https://dl.dropboxusercontent.com/u/...ate/index.html
La provo come al solito; oltretutto un tizio che nella v7 si lamentava di lag (cosa che io non vedo lol) ha scritto questo:
Motivo in più per farmelo provare ;)
In aggiornamento!
Per adesso, risultati eccellenti.
Non so dirti in fluidità perché la nuova euphoria è migliorata tantissimo in questo...
In ogni caso ecco i risultati fino a 50% (non so se riesco a scaricarlo tutto prima di uscire lol)
Spoiler:
Quale devo usare, saber mod o linaro?
@big0bum ho notato una frequenza minima CPU alzata a 1574... normale?
forse è per questo che mi è durato di meno, bho...
fin quando usavo mx player durava tantissimo, dopo invece, appena toccavo lo schermo sembra aver risucchiato tanto.
Ho lasciato tutto stock con il solito mio valore UV ecc.
fammi sapere ;) e se non ho scritto comprensibile dimmi che traduco.
Euphoria 06 + Bigbum v8 test
mx player 2ore e 30
clash of clans 25 minuti
10 min di chiamata
tapatalk
browser vari (di più del solito)
Spoiler:
Si infatti hai fatto solo 5 ore di schermo, rotfl.
Sicuro che non sia la minima al tocco?
Maybe it's the ROM's fault. I don't have problems on Optipop.
Anyway, a new V8 test is up: ftp://big-bum.uni.cx/.not_so_private
===
Forse è colpa della ROM. Non ho problemi Optipop.
In ogni caso, un nuovo test V8 è su: ftp://big-bum.uni.cx/.not_so_private
Installata ma niente!
Ho riprovato
Io penso di aver fatto come al solito le cose giuste; nulla mi rimane quella frequenza ....
Fino a quando ho questo problema non posso testarlo. ho provato anche altri kernel manager (kernel tweaker modificato)
A questo punto provo anche un full wipe e vediamo se risolvo...
Then maybe you can try the latest one. I've reverted a thing in the last version of V8.
Check for e32cd38 in the kernel name inside Settings.
===
Allora forse si può provare l'ultima. Ho ritornato una cosa nell'ultima versione del V8.
Controllare e32cd38 nel nome del kernel all'interno delle impostazioni.
Scarica l'ultima e pubblicare un dmesg.
Mi dispiace uomo.
Ho provato Euphoria OS via MultiROM senza Gapps. Purtroppo non posso installare KT o Perfmon poiché non posso accedere alla memoria interna o spingere le apks, ma è avuto modo di credermi.
http://i.imgur.com/L98OXT5.png
EDIT: For some reason, the min/max freq on load gets set to 1.6GHz in this ROM. It also doesn't honor my initram. I don't know if it's MultiROM fault or not.
EDIT2: I think they use a modified touchboost for mpdec. Touchboost acts a lot like stock MPD, but I can't find the file to disable touch.
===
EDIT: Per qualche ragione, il min / max freq del carico viene impostato a 1,6 GHz in questa ROM. Inoltre non onorare il mio Initram. Non so se è colpa MultiROM oppure no.
EDIT2: Penso che si avvalgono di una touchboost modificato per mpdec. Touchboost agisce un po 'come magazzino MPD, ma non riesco a trovare il file per disabilitare tocco.
No problem... funziona bene comunque; imposterò manualmente! cosa consigli di mettere in CPU Min freq? 300?
You can't manually set it. It will get reset after some time. It's mpd touchboost's fault. Also, if the initram gets reset everytime when you boot (I don't know if it's a MultiRom problem or not) then it's bad and not nice at all.
===
Non è possibile impostare manualmente. Si otterrà resettare dopo qualche tempo. È colpa di touchboost mpd. Inoltre, se il Initram si resetta ogni volta quando si avvia (non so se è un problema MultiROM o meno) allora è male e non affatto piacevole.