[KERNEL][5.x.x]Electroactive for Hammerhead

Quote:

---

Originariamente inviato da morfances

New build!!

April 30, 2015 - Electroactive-N5-1.47

≠	-optimize memory allocation in check_partition() -Fix changes not applying on boot -Add electroactive.sh script support -Thermal throttling set to Cooler by default for less heat

---

Già installato da ieri!!
Risolto problema con Euphoria scaldava di bestia!! Ho qualche micro lag nella app come google e chrome!
Per il resto si comporta bene, fluida e reattiva!

New build May 13, 2015 - Electroactive-N5-1.52

Download

≠

-Add sanity check to avoid unregistering the driver twice (therefore preventing kernel panic) -Add optimized SHA-256/224 -Update kernel sources to linux 3.4.107 -Move VFP init to an earlier boot stage -CAF sound codec driver -Fix voltage tables and scripts -Specifically modified PVS voltage tables per each unique device. Stock voltages now set differently depending on your CPU binning. -Update msm-kernel sources to android-5.1.1_r0.10 -Update Documentation & arch to 3.4.104 -Fix SMD packet sync loss issue -lmk tune up -Chrome freeze issues gone -Overclocking up to 2.9 GHz -Min CPU frequency down to 96 MHz -Can have different frequencies and/or governors for each CPU core -Ramdisk updated to be more compatible and better performance on more ROMs -FSTRIM now built-in: trims /data and /cache to discard any unused data blocks on boot, no more lag

New build!!!

May 14, 2015 - Electroactive-N5-1.56

≠

-Kernel sources updated. Reverted some bad commits. Added GPU implementation to prevent wavelocks and be more responsive and less freezing/lagging, especially in Chrome. -Updated the ramdisk, now has greater compatibility and better performance on more ROMs. -Chrome freeze issue being worked on. Some improvements -Script errors from previous build fixed -Updated config file and sh scripts, and kernel zip. MUCH more options in the config file, enhanced kernel options -Ability to change kernel governor in config file. - Overclocking experimental (may not work) -More incremental underclocking -Minimum CPU frequency now down to 96 MHz. Can also be changed in the configuration file. (Working) NOTE: Not needed, but highly recommended to delete these two files: -/etc/electroactive.conf -/sdcard/.electroactive.backup

New build!!

May 19, 2015 - Electroactive-N5-2.00

≠

-Kernel Rebased -Removed unneeded/unwanted commits and left all the good stuff in new base -Add deeper incremental overclocking up to 2.95 GHz. Still boots at stock frequency -Min CPU frequency down to 96 MHz, options for 192 and 249 MHz. Still boots at stock frequency -Built with -O3 CFLAGS Makefile variables for extreme optimization -Add MultiROM support -exFAT support built-in to kernel rather than a module -Add some speed and stability updates

New build :June 2, 2015 - Electroactive-N5-2.10

≠

-Major Update. Getting close to second major release. -More chrome fixes, should be almost completely gone. General UI speed-up and smoothness optimizations. -Memory leak issue fixes, a bit better memory efficiency. -Fix issues with any previously installed kernel files not being removed/reappearing after installation. -Battery life issues with wake-locks and screen power consumption are fixed, GPU and CPU drivers updated. -2 different versions of kernel: TC-DEF and TC-TEST. Only differences are the compiler toolchains and GCC. Try both and report which is better. TC-DEF uses the default old style build compiler and TC-TEST uses the new test compiler. -Update advanced color control -Kernel sources updated back to 3.4.107 from 3.4.0, some backports from Linux 3.18+ kernel sources. -F2FS Support Built-In to ramdisk. No need to flash any F2FS support patch before installing kernel. -More focus on optimization.

Link download in OP

New build!!

Electroactive-N5-2.25.zip

New build : per 5.1.1 e per android M

Downloads in OP


June 29, 2015 - Electroactive-N5-2.40/3.00-M

≠

-CPU Power Aware Scheduling -Partial-Resume Framework -Merged android M sources -Fix cpu sticking issue -Introduce PM Suspend Freeze -Remove compiler warnings to prevent any issues in installation -Re-add fsync control -Add GPU sysfs reporting in pwrctrl -Add 8974 support for enabling GPU GDHS -Use new global screen-off detection variable -Electroactive cpu governor: Introduce powersave-bias -Greatly improve memory access performance -Skip sensor_ind wakeup source activation via sysfs to prevent wakelocks

in test.
davvero interessante per vari aspetti per quanto riguarda il mio stile:
- governor personalizzato dal dev (un nuovo mondo da provare)
- frequenze min e max davvero particolari. chissà che batteria ci verrà fuori con un 300 e un 1100 (più ovviamente governor etc.)

per quanto riguarda le prestazioni, di sicuro sono inferiori a certi kernel come elemental x, code blue. lo stesso franco/hells mi sembrano migliori in questo. abbastanza ovvio visto le frequenze con cui gira, anzi! mi stupisco che il cell non si pianti con sti settaggi xD
insomma e vediamo come andrà xD

per il momento ho aumentato la frequenza massima almeno a 1200etc.
con 1100 non riesco


EDIT GIGANTE: b b b bbaaaallee xD era un fail mio! kernel adiutor si impostava a caso e mi ha messo ste frequenze. non fate caso al mio messaggio, non vale una cicca ed è tutto falso xD

Per il momento mi sto trovando molto bene :)

Quote:

---

Originariamente inviato da fabi_92

Per il momento mi sto trovando molto bene :)

---

Anch'io ,che lo seguo da sempre,noto miglioramenti nel consumo batteria e sopratutto non scalda a bestia ...come le prime releases