codice:
[...]
<5>[ 0.880581,0] aps_ts: aps_ts_of_init: default productid is "Falc"
<5>[ 0.880685,0] aps_ts: aps_ts_of_init: waiting 0 msec for UI on reset
<3>[ 0.911954,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0xc1300c8, irq:131
<3>[ 0.912068,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 0.912245,0] aps_ts 5-0034: I2C retry 1
<3>[ 0.931928,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 0.932104,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 0.932212,0] aps_ts 5-0034: I2C retry 2
<3>[ 0.951926,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 0.952037,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 0.952207,0] aps_ts 5-0034: I2C retry 3
<3>[ 0.971925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 0.972097,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 0.972269,0] aps_ts 5-0034: I2C retry 4
<3>[ 0.991925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 0.992034,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 0.992206,0] aps_ts 5-0034: I2C retry 5
<3>[ 1.011930,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 1.012104,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 1.012273,0] aps_ts 5-0034: I2C retry 6
<3>[ 1.031925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 1.032099,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 1.032206,0] aps_ts 5-0034: I2C retry 7
<3>[ 1.051925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 1.052099,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 1.052269,0] aps_ts 5-0034: I2C retry 8
<3>[ 1.071925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 1.072100,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 1.072205,0] aps_ts 5-0034: I2C retry 9
<3>[ 1.091925,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
<3>[ 1.092033,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
<3>[ 1.092204,0] aps_ts 5-0034: I2C retry 10
<3>[ 1.111882,0] aps_ts 5-0034: I2C read failed(1 bytes at 0x00b0)
<3>[ 1.112035,0] aps_ts: aps_query_device: Failed to read boot mode
<5>[ 1.112141,0] aps_ts 5-0034: aps_ts probe failed
<5>[ 1.112441,0] synaptics_dsx_of_init: using gpio config
<5>[ 1.112551,0] synaptics_dsx_of_init: using normal mode
<3>[ 1.211892,0] synaptics_dsx_i2c 5-0020: timed out waiting for reset to complete
<3>[ 1.215837,0] synaptics_dsx_i2c 5-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
<6>[ 1.220595,0] input: synaptics_dsx_i2c as /devices/f9927000.i2c/i2c-5/5-0020/input/input2
<6>[ 1.220848,0] synaptics_rmi4_query_device: Product: s2316, firmware id: 175833, config id: 13091704
<6>[ 1.221003,0] synaptics_rmi4_probe: registered MMI panel notifier
<6>[ 1.221565,0] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
<6>[ 1.222669,0] input: light-prox as /devices/virtual/input/input3
<6>[ 1.225241,0] using rtc device, qpnp_rtc, for alarms
<6>[ 1.225454,0] qcom,qpnp-rtc qpnp-rtc-e4997400: rtc core: registered qpnp_rtc as rtc0
<6>[ 1.225814,0] i2c /dev entries driver
<7>[ 1.227304,0] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
<7>[ 1.227315,0] msm_vidc: 1: no elements in frequency table
<7>[ 1.227325,0] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
<7>[ 1.227432,0] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
<7>[ 1.227449,0] msm_vidc: 1: Q6 hfi device probe called
<5>[ 1.227663,0] synaptics_rmi4_fwu_init: F34 version 0
<7>[ 1.227868,0] msm_vidc: 1: debugfs_create_file: fail
<3>[ 1.229854,0] msm_cci_probe: pdev e4a25c00 device id = -1
<7>[ 1.233396,0] Registered led device: torch-light
<3>[ 1.235041,0] imx132_init_module:139 rc -19
<6>[ 1.235192,0] imx135_init_module:629
<3>[ 1.235684,0] imx135_init_module:634 rc -19
<6>[ 1.235891,0] ov8825_init_module:141
<3>[ 1.236378,0] ov8825_init_module:146 rc -19
<6>[ 1.236520,0] ov8865_init_module:153
<3>[ 1.237052,0] ov8865_init_module:158 rc -19
<6>[ 1.238424,0] ar0543_init_module:401
<4>[ 1.395731,0] ar0543_read_otp_version: cal_ver = 0x1
<4>[ 1.421508,0] ar0543_otp_validate_crc: OTP CRC fail(crc_ref = 0x0, crc_otp = 0x0)!
<4>[ 1.421614,0] ar0543_read_otp: OTP CRC (rg = 0) fail!
<4>[ 1.422214,0] ar0543_auto_otp_read: Unable to locate OTP rt = 0x32!
<4>[ 1.422303,0] ar0543_read_otp: Auto read OTP Mod (rt = 0x32) fail!
<4>[ 1.422896,0] ar0543_auto_otp_read: Unable to locate OTP rt = 0x34!
<4>[ 1.423050,0] ar0543_read_otp: Auto read OTP Mod (rt = 0x34) fail!
<3>[ 1.423132,0] ar0543_read_otp_info: Read OTP fail!
<4>[ 1.452081,0] ar0543_set_lsc: Setting module LSC!
<6>[ 1.609786,0] mt9m114_init_module:1364
<6>[ 1.734336,0] ov5693_init_module:141
<3>[ 1.734925,0] ov5693_init_module:146 rc -19