R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Ehi ragazzi ora che sono alla 7.6 dopo la delusione 7.8, e sapreste consigliarmi qualche settaggio precotto per avere un'ottima fluidità senza compromettere troppo i consumi? O cosa dovrei modificare? Altrimenti poi passo alla 7.10... Grazie!
Inviato dal mio GT-I9100
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Quote:
Originariamente inviato da
alegu
C'e' già... ti mando il tutto in PM...
INVIATO DA ? CON IL MIO S?
Allora sono apposto:rolleyes:
Tra un flash e l'altro ci farò una capatina:D:D:D
Sempre che mia moglie non mi tiri dietro qualcosa:D:D:D
Inviato dal mio GT-I9100 con Tapatalk 2
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Ale sono curioso di sapere i tuoi settaggi per queste versioni 7.x con il dualboot
RB 3.0 + Dorimanx 7.4
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Quote:
Originariamente inviato da
lello83
Ale dono curioso di sapere i tuoi settaggi per queste versioni 7.x con il dualboot
RB 3.0 + Dorimanx 7.4
Arriveranno...ma quando si calma e se trovero' il giusto compromesso tra no lag e batteria...tanto ci sono ormai...per samsung...poi trasportero' su aokp...pero' essendomi innamorato delle aokp...rootbox su tutte...:D...e poi cosi mi fai arrossire...:D:D
INVIATO DA ? CON IL MIO S ?
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Pausa sizza dalla ragazza.... Intanto beccatevi questo :D
Quote:
Originariamente inviato da
dorimanx
Time for normal change log!
Kernel 7.10 ICS +JB-MALI DUAL BOOT uploaded.
Change Log:
*Thanks to GM we now have new GPU freq that can boost video performance
for games, movies and all that use video rendering.
New Freq are 330, 440, 520 they are active only if VPLL mode is Activated in GPU tab.
This is done for people that cant use 400Mhz, so now they can use 330 and try the 440Mhz, 520Mhz is very tempting but will be stable in very limited number of devices, it's HARDWARE limit.
Sadly for some devices even 330Mhz will crush the driver/hardware on 90~100% GPU utilization, then use MAX 267 forever. :(
To use 330Mhz set voltage for it to 1100mv, for 440 set 1200mv, for 520 i tried all from 1100 to 1300 and for me, it's crushing on GPU test, so i cant tell you what best.
*I have tuned Touch screen code, should be ok now.
*Made changes in Sound boost by GM, now it's as spinner type (was seek bar)
looks better and some code lines in boot scripts are not needed any more.
*Updated WIFI from SG3 JB source to ver 1.15.1, ported by GM.
*Limited HACK to fix low speaker sound after boot to be used only on JB ROMS,
problem is only there,
Hack is simple, it's just push the volume down virtual key 3 times down, and push vol up 4 time up, so if you too quick to see your volume go down and up, dont worry it's not a BUG in your phone :)
*Updated Busybox and bln binary from GM source.
*Updated Sharpness script by GM, now i can see that words and numbers have more sharp font, that's all i have found, but looks good and sharp :)
*Tuned all profiles for GPU freqs.
*converted charge current to seek bars, now every one can set what he like/think is best :)
*Made some corrections in scripts.
*Restored lost code Tweak to save more power on deepsleep for ondemand, scary, and pegasusq + tuning to GOV.
*Updated to 3.0.51 main stream patches,
*Set kernel HZ from 250 to 300Mhz (default for old android was 100Mhz, for new was 250Mhz, for servers we should set 300Mhz or higher)
Have fun and report :)
BIG Thanks to GM for very cool update! :)
Sent from Tapatalked JB GT~i9100
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Fine primo ciclo con il 7.9 su CMX 04..
Uso sempre lo stesso... Impostazioni leggermente modificate.... Ora si comincia a ragionare...
Adesso flash aggiornamento ROM e KERNEL.... E' duro il lavoro del tester:screwy:
Inviato dal mio GT-I9100 con Tapatalk 2
R: [KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery
Quote:
Originariamente inviato da
N1m0Y
Fine primo ciclo con il 7.9 su CMX 04..
Uso sempre lo stesso... Impostazioni leggermente modificate.... Ora si comincia a ragionare...
Adesso flash aggiornamento ROM e KERNEL.... E' duro il lavoro del tester:screwy:
Inviato dal mio GT-I9100 con Tapatalk 2
Ma dove vivi...sotto un ripetitore?:D:D segnale sempre verde... comunque domani giorno di ultimo test e aggiorno impostazioni per Samsung...poi do il via ai test aokp...:D:D
INVIATO DA ? CON IL MIO S?