Trovo la 7.6 più performante rispetto alla 7.4, ma la 7.4 ha più autonomia...nel mio caso
Sll: JellyBam + DorimanX 7.6
Trovo la 7.6 più performante rispetto alla 7.4, ma la 7.4 ha più autonomia...nel mio caso
Sll: JellyBam + DorimanX 7.6
Per ora sto testando il profilo battery con qualche piccola modifica con questo 7.6 e al risveglio mai avuti problemi.... Prima da recovery scegli il battery e dopo da extweaks ritocchi alcune cosine.... Eccoli e visto che ci sono aggiorno il mio post:
scaling_max_freq=1000000
scaling_min_freq=200000
smooth_level0=200mhz
scaling_governor=ondemand
load_l1=20
load_h0=20
min_rq=2
load_rq=20
rate=100
freq_min=700000
GENTLE_FAIR_SLEEPERS=off
ARCH_POWER=on
cpu_undervolting=-50
enable_mask=3
sched_mc_power_savings=0
busfreq_up_threshold=25
scaling_max_suspend_freq=500000
scaling_min_suspend_freq=200000
deep_sleep=sleepy
standby_freq=200000
wakeup_delay=0
wakeup_boost=5
mali_touch_boost_level=0
GPUFREQ1=100
GPUFREQ2=160
GPUFREQ3=200
GPUFREQ4=267
GPUFREQ5=267
GPUVOLT1=850
GPUVOLT2=900
GPUVOLT3=950
GPUVOLT4=1000
GPUVOLT5=1000
GPUTHRESHOLD1UP=30
GPUTHRESHOLD2DOWN=20
GPUTHRESHOLD2UP=40
GPUTHRESHOLD3DOWN=30
GPUTHRESHOLD3UP=55
GPUTHRESHOLD4DOWN=45
GPUTHRESHOLD4UP=90
GPUTHRESHOLD5DOWN=80
mov_hysti=1
min_bl=50
min_gamma=1
max_gamma=20
power_reduce=on
user_mode=on
user_cb=127
user_cr=127
user_gamma_adjust=0
pwm_val=50
tsp_touch_freq=500000
tsp_slide2wake=off
mdnie_shortcut_enabled=off
dyn_brightness=off
fbearlysuspend_delay0=50
negative_tweak=1
TOUCHSCREEN1=50
TOUCHSCREEN2=40
TOUCHSCREEN3=12
TOUCHSCREEN4=53
TOUCHSCREEN5=38
TOUCHSCREEN6=44
soundgasm_hp=2
sound_volume1=16
sound_volume2=4
sound_volume3=4
gesture_tweak=off
enabled=off
bln_switch=2
enabled_charging=off
notification_timeout=300000
bln_reset_notification=1
bln_charging_notification=0
bln_check_battery=6
led_timeout=1
tsp_flash_timeout=off
led_fadeout=on
touchkey_brightness=2700
logger=off
max_cpu_lock=2
adb_mode=0
supplicant_scan_interval=360
wifi_pwr=on
zramtweaks= off
gpsregion=Europe
scheduler=fiops
sleep_scheduler=noop
usb_mode=default
default_stats=off
chargecurrent= (Stock)
install_root=on
cortexbrain_background_process=1
cortexbrain_auto_tweak_brightness=off
cortexbrain_auto_tweak_wifi=off
android_logger=auto
cortexbrain_firewall=off
cortexbrain_tcp=on
cortexbrain_cpu=on
cortexbrain_memory=on
cortexbrain_battery=on
cortexbrain_system=on
cortexbrain_kernel_tweaks=on
cortexbrain_io=on
Sent from Tapatalked JB GT~i9100
Ultima modifica di Leo2589; 03-11-12 alle 12:45
Ho editato alcuni valori che non si capivano.... Comunque non aspettatevi grandi cambiamenti nella durata....
Il problema sono le nuove jb e mali.... Sono molto fluide in tutto (scrolling, apertura, chiusura...), grazie anche ai nuovi driver mali.... Ma più reattività significa maggior consumi.... Si potrebbe anche strozzare di più il tutto perdendo però in fluidità e reattività e sinceramente se sto provando la jb Cmx10 è proprio per la velocità che offre rispetto alla stock ICS nonostante i consumi siano elevati....
Poi ognuno è libero di portare l'uv a - 100 o prendere altri accorgimenti per risparmiare batteria....
Vi ricordo il thread di Petrucci con la spiegazione dei vari settaggi di Extweaks...
https://www.androidiani.com/forum/sh....php?p=1326098
Ricordate la parola d'ordine del dorimanx: Estrema personalizzazione
Sent from Tapatalked JB GT~i9100
Ultima modifica di Leo2589; 03-11-12 alle 12:54
crisgen (03-11-12)
Sono quelli di default del profilo battery.... Neanche li ho guardati sinceramente poiché non gioco con il gs2 quindi al massimo uso la prima frequenza della GPU
In compenso ho effettuato un uv di -50mv su ogni frequenza della GPU....
Edit : in effetti sono bassucci guardandoli meglio... E visto che non gioco li ho messi così :
GPUTHRESHOLD1UP=90
GPUTHRESHOLD2DOWN=50
GPUTHRESHOLD2UP=90
GPUTHRESHOLD3DOWN=50
GPUTHRESHOLD3UP=90
GPUTHRESHOLD4DOWN=50
GPUTHRESHOLD4UP=90
GPUTHRESHOLD5DOWN=50
Sent from Tapatalked JB GT~i9100
Ultima modifica di Leo2589; 03-11-12 alle 13:09
crisgen (03-11-12)
e' uscita la 7.8!!!!!
non mi apre il link per i download in prima pagina
mi spunta questo:
Strano perchè me lo ha sempre apertoIf you are seeing this page, it means that web has not been configured for this domain on this server.
This could be due to the following causes:
- Kloxo has not restarted the web server yet after you added the domain. Please wait for the web server to restart.
- The domain is pointing to the wrong Kloxo server. Ping the domain and make sure that the IP matches one of the IPaddress seen in admin home -> ipaddresses
- If you are seeing this page when you try to access an IP like http://192.168.1.1, then that means that the IP has not yet been mapped to a domain. Go to client home -> ipaddresses -> ipaddress home -> domain config and map an IP to a domain.
- Once you map an IP to a domain, then you have to make sure that the domain pings back to the same IP. Otherwise, if you try to access the domain, you will get this page. So IP -> domain.com should mean that domain.com pings to the same IP.
Ultima modifica di luigimak; 03-11-12 alle 13:25