[KERNEL][3.0.90][TWRP/CWM][STWEAKS]KangBang Kernel - For 4.3/4.2 ROMs ONLY!

[msquared]

Vi presento un kernel compatibile solo con ROM AOSP 4.2/4.3 .
Il kernel è presente in due versioni:una con recovery TWRP e una con recovery CWM,ed è basato sul kernel Cyanogenmod ottimizzato per performance e durata della batteria.
NOTA: il kernel è ancora in fase iniziale di sviluppo.

Ovviamente tutti i crediti vanno al RD che lo sta sviluppando,qui il thread di xda:
[KERNEL][3.0.80][TWRP]KangBang Kernel v1- For AOSP 4.2 Roms only - xda-developers

CHANGELOG v2.0:

• [*]Made for Android 4.3(evitate di provarlo sul 4.2)
• Swteaks support!(thanks to gokhanmoral and gustavoss)
• zzmoove v0.7
• Sound amplification(thanks myfluxi) upto 20 decibels
• CWM updated to v 6.0.37
• All selinux features and AIO enabled
• Compiled with -fno-pic -munaligned-access
• Updated to linux 3.0.90 from korg

CHANGELOG v1.3

• Linux 3.0.82
• Replace normal BLN with BLNWW(no more wakelocks,but static led)
• Port gokhanmoral/dorimanx touchkey driver
• Fix led_disable function,broken in previous release
• Merge modem interface from smdk4210 kernel for better battery (cm upstream)
• Updates to drivers/base/sync.c and sw_sync from android linux 3.0 upstream
• Update zzmoove to v0.5
• Tune zzmoove for our device
• CIFS module support(requested by user)
• add frandom driver(requested by user)
• Updates to block from android linux 3.0 upstream
• Revert "SMP: Update secondary cpu boot phase routine"
• Samsung i9300 Update 10
• Improve touch sensitivity
• Introduce timer slack controller
• Remove some debugging
• And various other patchs.See github for proper changelog.

CHANGELOG  V1.2

Update to Linux 3.0.81
Add BLN(Back Light Notification) function
cpufreq: Add zzmoove v0.4
Compile with GCC 4.7
remove -fgraphite and loop optimizations and optimize modules
Update row I/O scheduler to latest from CodeAurora
Enable Swap and Zram(as requested by a user)
Upstream patches for zram
Change compression method for zImage,quicker boot
CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often
ARM: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes
ARM: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary
block: Add support for reinsert a dispatched req
block: Add API for urgent request handling
block: add support for Linux 3.0.x for reinsert a dispatched req
cpufreq: Make sure the cpufreq notifier is called last[arighi]
Fix up freqs below 200 Mhz

Changelog v1.1

block: Add Zen I/O Scheduler
Makefile: Compile with -finline-functions -ffast-math -mtune=cortex-a9 -mfpu=neon -march=armv7-a and even more gcc 4.6 specific cflags
mach-exynos: Remove some dead code,thanks to myfluxi
pegasusq: Kang from Siyah Kernel
bcmdhd: Enable Ad-Hoc (IBSS) mode
mach-u1: use smdk4412 temperature values
mach-exynos: busfreq: Increase up threshold
Increase available memory from 791 MB to 794 MB
Fix some compiler warnings introduced by gcc 4.6.x
fs/dyn_fsync: check dyn fsync control's active prior to performing fsync ops
Dynamic Fsync : force flush if kernel panic or rebooting
staging: android: lowmemorykiller: Change default debug_level to 1
staging: android: lowmemorykiller: well-marked debug print
dynamic fsync: favor true case since most will be using this feature
irq: Set CPU affinity as soon as the irq thread is created
f_fs: ffs_func_free: cleanup requests allocated by autoconfig
hrtimer: Consider preemption when migrating hrtimer cpu_bases
hrtimer: Prevent enqueue of hrtimer on dead CPU
ipv4: save cpu cycles from check_leaf() - Backport from linux 3.8
network speed tweak
AIO: Don't plug the I/O queue in do_io_submit()
tmpfs: fix mempolicy object leaks
ARM: Add optimised swahb32() byteswap helper for v6 and above
SCHEDULER: Autogroup patch group by current user android UID
ARM: net: JIT compiler for packet filters
ARM/mm: drop GFP_COMP for dma_alloc_coherent
ARM: cache: assume 64-byte L1 cachelines for ARMv7 CPUs
timer: optimize apply_slack()
ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation
arm/crypto: Add optimized AES and SHA1 routines
currentwidget support based on Entropy512's commit in his GB kernel
increase VM_MAX_READAHEAD to 1024
mmc: use really long write timeout to deal with crappy cards
slicing-by-8 algorithm for crc32 and crc32c
ext4: fixup 64-bit divides in 3.0-stable backport of upstream fix
update Android logger,timer_gpio and lowmemorykiller from Linux 3.8
arch:arm: Compile with -pipe

Changelog  V1.0

Updated to Linux 3.0.80
18 Step cpu frequency(25 Mhz to 1600 Mhz) and CPU Undervolt support
Removed debugging(Like sec_debug,cgroup_debug,stand-hotplug debug)
lib/string: use glibc version
lib/sha1: use the git implementation of SHA-1
lib/sha1.c: quiet sparse noise about symbol not declared
arm: remove "optimized" SHA1 routines
arm: remove stale export of 'sha_transform'
fs/dyn_sync_cntrl: dynamic sync control
tcp: Proportional Rate Reduction for TCP
mutex: dynamically disable mutex spinning at high load
slub.c: little tweak for performance improvements
kernel: power: prevent DVFS_LOCK_ID_USER lock for min and max frequency
block: sio and deadline tweaks
lib/memcopy: use glibc version
various compiler optimizations,and compiled with linaro toolchain
ARM: 7011/1: Add ARM cpu topology definition
sched: Ensure cpu_power periodic update
ARM: cpu topology: Enable ARCH_POWER
ARM: topology: save cpu id of each core
ARM: topology: Update topology according to current sched_mc mode
ARM: 7182/1: ARM cpu topology: fix warning
ARM: topology: Add a cpu_power function
ARM: topology: Add a topology update notification
ARM: cpu topology: Add asym topology flag for using cpu0 1st
ARM: cpu topology: add debugfs
cpupower: update the cpu_power according to cpu load
sched: use cpu capacity to decide if a ILB is needed
sched/nohz: Rewrite, fix and add more accurate load-avg computation
sched: Add missing call to calc_load_exit_idle()
Optimized ARM RWSEM algorithm
ARM: decompressor: Enable unaligned memory access for v6 and above
lib/lzo: Update LZO compression to current upstream version

Consiglio: usate ZZMOOVE come governor.

NE IO NE IL FORUM SIAMO RESPONABILI DI DANNI ARRECATI AL VOSTRO DEVICE.
FLASH AT YOUR OWN RISK

[N1m0Y]

DOWNLOAD

Nota: l'unica differenza tra le due versioni è la recovery(CWM/TWRP),per il resto sono identiche.


V2.0(ultima per Android 4.3)

CWM: Link

V1.3(Ultima per Android 4.2)


TWRP: Link

CWM: Link


V1.2(VECCHIO) BLN wakelocks

TWRP: Link

CWM: Link


V1.1(VECCHIO)

TWRP : Link

CWM : Link


V1.0(RELEASE INIZIALE)

TWRP: Link

CWM: Link

Source Code: Link

CREDITS

Torvalds and team,for the Linux kenrel
Samsung
gokhanmoral
TeamWin
The CyanogenMod Project
myfluxi
andreilux
faux123


Post in continuo aggiornamento

[msquared]

Placeholder

[Leo2589]

Eccomi.. :thumbup:

Edit: non posso invitare Alucard a visitare la concorrenza

[N1m0Y]

Questo è di scorta

[RaffBulgaro]

Appena flashato.......................................... .................................

[N1m0Y]

Appena flashato.......................................... .................................

Come va sul next? Bootloop o Brick?

Tu sei l'amico di M^2 vero? Un altro chattone




Erasare pure

[RaffBulgaro]

È stato msquared a farmi riattivare sul forum..... Di solito vivo solo in chat.........

[xMaTtEoRuLeZx]

A Me sembra che i colori siano molto diversi dagli altri kernel. Ad esempio la barra di stato blu,ora è azzurrina.ed è cosi per tutti i colori.

[RaffBulgaro]

A Me sembra che i colori siano molto diversi dagli altri kernel. Ad esempio la barra di stato blu,ora è azzurrina.ed è cosi per tutti i colori.

Controlla che abbia queste impostazioni.....



Io i colori non li vedo così diversi.....