Guida di unbrick z7 max-mini

https://www.androidiani.com/forum/sh...d.php?t=446548 follow cracky....

Inviato dal mio z7 max 48000 antutu usando Androidiani App

Caro Manuel, è andato tutto a catafascio: il problema è la motherboard che si è danneggiata ed è ovviamente il componente più costoso. Il cellulare non è più in garanzia e cmq si accorgerebbero delle manomissioni, pertanto non me la sostiuirebbero in garanzia, cioè gratis, bensì me la dovrei pagare e mi costerebbe quasi quanto il cell nuovo!!!! Ho contattato un servizio riparazione del nord Italia che senza chiedermi nulla mi ha dato le informazioni. L'ho portato in un laboratorio dalle mie parti e nemmeno lì hanno potuto fare nulla. A questo punto vendo lo Z7 Max sperando di ricavare almeno la metà di quello che mi è costato 300 €, almeno mi compro un'altro cellulare da metà prezzo e metà qualità. Mi accontento quindi in termini di qualità e mi accontento di 150€: si recupera lo schermo, tutta la scocca, audio, batteria, cover, frose la eMMC e altro.

ho ottenuto attraverso strumento Copia HDD Raw scrivere il image.boot.
Il strumento Copia HDD Raw ho visto circa 32 GB.
Dopo Continuo a avviare il telefono di nuovo dare che inizia la vibrazione e non continua.
Inoltre, nello stesso volume e premere il potere non porta a niente altro.

Ora che cosa?

By Google translate.

Dopo aver caricato boot.img devi provare a reinstallare i driver e provare...comunque scrivi in inglese tranquillamente...

Inviato dal mio z7 max 48000 antutu usando Androidiani App

Ubuntolo lo ho pensato però mi sembra un esagerazione divresti provare a chiedere a teachrepair.it e vedere quanto ti chiede..

Inviato dal mio z7 max 48000 antutu usando Androidiani App

I dont understand the latest post.
Is mine ZTE dead en should I send it to teachrepair?

Allegato 135268

Screen print from HDD. Is see mine ZTE

Allegato 135269
Configuration

Allegato 135270
ID screen

Drivers can not be installed probably ID 19

Alternative driverAllegato 135271

Allegato 135272


What is the golden Driver Windows 7 64 bits

Allegato 135273

Is this probably usefulll information.

Allegato 135274
Allegato 135275

Google translate

Ho la possibilità di inizializzare in HDD Raw Copy dei dispositivi di memorizzazione USB Qualcomm MCC con stile di partizione MBR.
È che una saggia idea.

Se guardo attraverso HDD Raw è il mio dirver buono e la gestione dei dispositivi ancora QHSUSB_BULK

You must install driver....you can try to load from hdd raw copy recovery.img....

Inviato dal mio z7 max 48000 antutu usando Androidiani App

When i understand you correctly i have to write the file recovery.img from the directory Nubia_Z7_Max_Multi to mine device?

jan you can use a recovery of z7 max..you can extract recovery.img of the rom posted in first page....You have to change the id hardware of the device....then you may install the driver...

I downloaded the file z7max_nx505j_线刷包(1) on the first page.
I should write recovery.omg to mine device with HDD Raw Copy

Where and how can I change the ID of the Hardware?

Yes you should write recovery.img on your device with hddrawcopy only so you can change the id ...

Inviato dal mio z7 max 48000 antutu usando Androidiani App

recovery written
Allegato 135324
how can i change the id

id change only if you write with hddrawcopy boot or recovery.img .... Try and try to install driver....you can try to hold power button and + ,- for 18 second, power button only for 14 second...

Inviato dal mio z7 max 48000 antutu usando Androidiani App

I got a headache. Hardware ID is stil 19.
I wil try tomorow, I can not accept (yet) that mine Z7 is dead,

In HDDrawcopy is get an qeustion to initialize the drive. See picture. Is that a way to go?
Allegato 135333


The manager sometimes see mine phone as YUNOS phone.
Oneplus+?????

Molte grazie che sei un "imbecille" come me vuole aiutare.

Yunos phone no oneplus!!!!! I can't read the photo...photo is reduced....baaahhhh...senza parole...however how you brick it ?

Inviato dal mio z7 max 48000 antutu usando Androidiani App

I wanted to resize mine partition.
With the software on nubia forum is wanted to change it in 16+16.
It came back with 32+0.
I trey it again is there was the brick.

The photo: when i go to Open Disk management Console (right side on the bottum above Continue)

Secund screen

Drives must be initialized before you can through management for logical access. Drive one.
The following partition style to use for the selected disks: MBR or GPT


I look it up what that mean:
Before an empty disk can be used will have to be initialized first. Initialization takes place on the first sector of a hard drive and set the operating system unable to boot and also contains the partition table. By partitioning is indicated which part of the hard disk may be used.

It looks like I have to initialize en then probably format it?

Can I sent the picture directly to you on one way of another?

Quote:

---

Originariamente inviato da Jan1959

I wanted to resize mine partition.
With the software on nubia forum is wanted to change it in 16+16.
It came back with 32+0.
I trey it again is there was the brick.

The photo: when i go to Open Disk management Console (right side on the bottum above Continue)

Secund screen

Drives must be initialized before you can through management for logical access. Drive one.
The following partition style to use for the selected disks: MBR or GPT


I look it up what that mean:
Before an empty disk can be used will have to be initialized first. Initialization takes place on the first sector of a hard drive and set the operating system unable to boot and also contains the partition table. By partitioning is indicated which part of the hard disk may be used.

It looks like I have to initialize en then probably format it?

Can I sent the picture directly to you on one way of another?

---

No no you mustn't format !! Upload photo on mega and give me link...

Inviato dal mio z7 max 48000 antutu usando Androidiani App

Hi, if pc now view phone no touch o reformat emmc. With nubia tools simple reprogramming rom, all partitions included in this rom.

initialize.PNG 173 KB
https://mega.co.nz/#!IBMFHRxB!4Lr9V_...BBVrA3YgiORh4g

I choose antoher dirver ZTE Composite ADB Interface
I was accepted but Id is stil 19
Is that good or......

New info

In miy computer i can not see it still.

I wil go for now and try tomorrow again.

Cracky tu quando hai flashato il boot hai selezionato mbr vero ? No gpt

Inviato dal mio z7 max 48000 antutu usando Androidiani App

Quote:

---

Originariamente inviato da manuelb

Cracky tu quando hai flashato il boot hai selezionato mbr vero ? No gpt

Inviato dal mio z7 max 48000 antutu usando Androidiani App

---

I dont understand thequestion.
Google says: Cracky you when you flashed boot mbr have selected it? No gpt


When I go to boot manager i get a question to initalize the Z7 drive.
At this moment i did NOT initalize in HDD raw the Z7 drive.


I write recovery.img once again succesfull and try several times to change the driver
No success stil id 19

Quote:

---

Originariamente inviato da Jan1959

I dont understand thequestion.
Google says: Cracky you when you flashed boot mbr have selected it? No gpt


When I go to boot manager i get a question to initalize the Z7 drive.
At this moment i did NOT initalize in HDD raw the Z7 drive.


I write recovery.img once again succesfull and try several times to change the driver
No success stil id 19

---

this message is for cracky not for you..

Sorry I'm not italian but french so I submit my post in english.
I've read almost all the posts of this thread but not seen similar issue as I face.
My Z7 mini is bricked.
I installed the required driver 'Qualcomm QDLoader 9008' and my phone i detected as such when connected to my PC (windows 7 64 bits).
I start Nubia ToolStudio and click refresh.
My phone appears in the list associated with the correct com port.
But after 1 seconds the phone disappears from the device list of my computer then reappears a few seconds (3 or 4) later.
So when I click the 'Start' button in the nubia ToolStudio, I get an error.
Does anyone already faced the same issue ? Any suggestion ?
Thanks.

-Format root emmc with partition software "mbr"
-Write on root emmc boot.img

New id hardware now is changed!

Quote:

---

Originariamente inviato da cracky

-Format root emmc with partition software "mbr"
-Write on root emmc boot.img

New id hardware now is changed!

---

Cracky, to be sure to check if I understand you fully.

In HDD Raw I choose "Open Diks Management Console" .
There I get an extra menu for Drive 1 (ZTE Z7). Drives has to be initalized before you get access to Management for logical writing
I choose Partion styke MBR (Master Boot Record).

Right?


I not sure what I have to do afterwards

I think (according to Internet):
Soon the indication "standard disk 'shows and says that have one unallocated partition.
Have a choose to devide the drive in more than one partion.?

Ho preparato una guida alternativa su come installare i driver per z7 max e mini avendo comunque id hardware 19d2 e soprattutto ho preparato dei nuovi driver ecco qui la guida https://mega.co.nz/#!E55R1JwZ!8eQqcd...79tEtqaNy49hAs da seguire che sposterò in prima pagina ovviamente poiché molti a quanto ho capito hanno sto problema di incompatibilità e non riescono a superarlo facilmente o in maniera forzosa.

Quote:

---

Originariamente inviato da manuelb

Ho preparato una guida alternativa su come installare i driver per z7 max e mini avendo comunque id hardware 19d2 e soprattutto ho preparato dei nuovi driver ecco qui la guida https://mega.co.nz/#!E55R1JwZ!8eQqcd...79tEtqaNy49hAs da seguire che sposterò in prima pagina ovviamente poiché molti a quanto ho capito hanno sto problema di incompatibilità e non riescono a superarlo facilmente o in maniera forzosa.

---

jan follow guide....

Allegato 135504

Succesfull changed.

After unplugging and plugging i cant see it on my computer.
Shoud I know write recover.img or boot.img with HDD Raw

I look in HDD raw and stil get the question to initialize

Z7 is stil vibrating again and again

Quote:

---

Originariamente inviato da Jan1959

https://www.androidiani.com/forum/at...4&d=1423507768

Succesfull changed.

After unplugging and plugging i cant see it on my computer.
Shoud I know write recover.img or boot.img with HDD Raw

I look in HDD raw and stil get the question to initialize

Z7 is stil vibrating again and again

---

The driver work ? Or not ?
Have you follow my guide ?

Inviato dal mio z7 max 48000 antutu usando Androidiani App

You must search device under com and ltp

Inviato dal mio z7 max 48000 antutu usando Androidiani App

I see it under Poorten (COM&LPT)
And know?
Wat is the way to go

If the driver work You can download the firmware with nubia tool

Inviato dal mio z7 max 48000 antutu usando Androidiani App

nubia tool

Allegato 135510

It stops