CERCA
PER MODELLO
FullScreen Chatbox! :)

Utente del giorno: 9mm con ben 2 Thanks ricevuti nelle ultime 24 ore
Utente della settimana: megthebest con ben 8 Thanks ricevuti negli ultimi sette giorni
Utente del mese: 9mm con ben 39 Thanks ricevuti nell'ultimo mese

Pagina 1 di 6 123 ... ultimoultimo
Ultima pagina
Visualizzazione dei risultati da 1 a 10 su 53
Discussione:

Master MID 7046 con virus

Se questa discussione ti è stata utile, ti preghiamo di lasciare un messaggio di feedback in modo che possa essere preziosa in futuro anche per altri utenti come te!
  1. #1
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    Master MID 7046 con virus

    Ciao a tutti,

    un amico mi ha dato un tablet Master MID 7046 con seri problemi sperando che si riesca a ripristinare.
    Problemi di continui blocchi, arresti di applicazioni, schermate di pubblicità anche quando non c'è il browser aperto, impossibilità di leggere la SD, di utilizzare il bluetooth e disattivare il wifi sono solo alcuni dei problemi per cui mi fanno supporre si tratti di un virus.
    Ho provato a fare un Hard Reset ma non cambia nulla, ho riavviato in modalità provvisoria cercando di disattivare manualmente strani processi in esecuzione (e ce ne sono alcuni davvero strani) ma non ho ottenuto nulla.
    Vorrei flashare una ROM ma non ho trovato nulla di specifico riguardo a questo modello.

    Qualcuno può darmi un aiuto? grazie

  2.  
  3. #2
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    Sono riuscito a fare il root e installare cwm. Qualcuno per caso ha il backup o sapete dirmi come modificare il mio?

    Inviato dal mio GT-I9301I utilizzando Tapatalk

  4. #3
    Baby Droid


    Registrato dal
    Aug 2016
    Messaggi
    31

    Ringraziamenti
    22
    Ringraziato 14 volte in 14 Posts
    Predefinito

    ciao, sono possessore di mid 7046 e feci un backup con readback usando flashtool, debbo ritrovarlo tra i vari backup di altri master, dovresti usare mtkdroid per ottenere il tuo file scatter che poi ti servirà per flasharele partizioni della rom, stasera proverò a uppare il backup del master 501 e cercherò quello del mid 7046 se ti occorre, bisognerà vedere se le rom hanno lo stesso firmware e quindi lo stesso file scatter delle partizioni

  5. Il seguente Utente ha ringraziato Saldis per il post:

    qwertino (31-03-17)

  6. #4
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    Ho già fatto backup e ho il file scatter. Se riesci ad uppare il tuo backup ci provo.. Che versione di fw è?

    Inviato dal mio GT-I9301I utilizzando Tapatalk

  7. #5
    Baby Droid


    Registrato dal
    Aug 2016
    Messaggi
    31

    Ringraziamenti
    22
    Ringraziato 14 volte in 14 Posts
    Predefinito

    Quote Originariamente inviato da qwertino Visualizza il messaggio
    Ho già fatto backup e ho il file scatter. Se riesci ad uppare il tuo backup ci provo.. Che versione di fw è?
    Build number:
    master.ita.4.4.2.MID7046_3G.2015.01.24
    Build date UTC:
    20150124-020926
    Kernel v:
    3.4.67 (evan@evan)(gcc version 4.7 (GCC))#2SMP Mon Jan 26 10:49:26 CST 2015
    Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/31 15:41

    questi dati sono presi dal log.txt di mtkdroid

    Seguono le partizioni in questo ordine:
    Preloader 1400000 000000
    Mbr 80000 000000
    Ebr1 80000 80000
    Pro_info 300000 100000
    Nvram 500000 400000
    Protect_f a00000 900000
    Protect_s a00000 1300000
    Seccfg 20000 1d00000
    Uboot 60000 1d20000
    Bootimg 60000 1d80000
    Recovery 60000 2380000
    Sec_ro 40000 2980000
    Misc 80000 29c0000
    Logo 300000 2a40000
    Expdb a00000 2d40000
    Android 32000000 3740000
    Cache e200000 35740000
    Usrdata 80000000 43940000
    Fat 25fe0000 c3940000
    Bmtpool 1500000 febf00a8

    Per favore invia link del tuo scatter così riprovo a fare backup alle prime partizioni

  8. Il seguente Utente ha ringraziato Saldis per il post:

    qwertino (02-04-17)

  9. #6
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    Questi li ho presi dal log di MTKDroid

    preloader 0x0000000000600000 0x0000000000000000 2 /dev/misc-sd
    mbr 0x0000000000080000 0x0000000000000000 2 /dev/block/mmcblk0
    ebr1 0x0000000000080000 0x0000000000080000 2 /dev/block/mmcblk0p1
    pro_info 0x0000000000300000 0x0000000000100000 2 /dev/block/mmcblk0
    nvram 0x0000000000500000 0x0000000000400000 2 /dev/block/mmcblk0
    protect_f 0x0000000000a00000 0x0000000000900000 2 /dev/block/mmcblk0p2
    protect_s 0x0000000000a00000 0x0000000001300000 2 /dev/block/mmcblk0p3
    seccfg 0x0000000000020000 0x0000000001d00000 2 /dev/block/mmcblk0
    uboot 0x0000000000060000 0x0000000001d20000 2 /dev/block/mmcblk0
    bootimg 0x0000000000600000 0x0000000001d80000 2 /dev/block/mmcblk0
    recovery 0x0000000000600000 0x0000000002380000 2 /dev/block/mmcblk0
    sec_ro 0x0000000000040000 0x0000000002980000 2 /dev/block/mmcblk0
    misc 0x0000000000080000 0x00000000029c0000 2 /dev/block/mmcblk0
    logo 0x0000000000300000 0x0000000002a40000 2 /dev/block/mmcblk0
    expdb 0x0000000000a00000 0x0000000002d40000 2 /dev/block/mmcblk0
    android 0x0000000035200000 0x0000000003740000 2 /dev/block/mmcblk0p4
    cache 0x0000000017800000 0x0000000038940000 2 /dev/block/mmcblk0p5
    usrdata 0x0000000072000000 0x0000000050140000 2 /dev/block/mmcblk0p6
    fat 0x00000000239c0000 0x00000000c2140000 2 /dev/block/mmcblk0p7
    bmtpool 0x0000000001500000 0x00000000ff9f00a8 2 /dev/block/mmcblk0

    Il mio FW è

    Model : MID7046 3G
    Build number : ALPS.JB3.MP.V1
    Build date UTC : 20141113-015601
    Android v : 4.2.2
    Kernel v : 3.4.5 (root1@root1-desktop) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Nov 13 09:53:52 CST 2014
    Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/31 15:41

    Dimmi cosa devo fare

  10. #7
    Baby Droid


    Registrato dal
    Aug 2016
    Messaggi
    31

    Ringraziamenti
    22
    Ringraziato 14 volte in 14 Posts
    Predefinito

    @qwertino
    come vedi tu hai la versione precedente con jelly bean, se l'hardware è un mt6572 potrei provarlo facendo qualche confronto, però dovrei usare il tuo scatter e qualche partizione iniziale, cioè il preloader, boot.img... e quelle che potrebbero garantire l'accensione del logo e la recovery... escludendo per ora quelle di grandi dimensioni tipo system.img ed ovviamente fat cache e data, se sono compatibili potresti usare le mie partizioni che costituirebbero un upgrade a kitkat, però prima dovresti inviarmi le tue partizioni piccole per vedere se a me fanno partire almeno il logo, se invece l'hardware è un mt6577 non credo che sul mio funzioni e viceversa

  11. Il seguente Utente ha ringraziato Saldis per il post:

    qwertino (02-04-17)

  12. #8
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    È un mt6572.
    Ti mando in pm la cartella !Files_to_Flashtool di Mtkdroid?

    Inviato dal mio GT-I9301I utilizzando Tapatalk

  13. #9
    Baby Droid


    Registrato dal
    Aug 2016
    Messaggi
    31

    Ringraziamenti
    22
    Ringraziato 14 volte in 14 Posts
    Predefinito

    @qwertino
    Io uso mediafire per postare le mie rom, provai anche io con i mp ma a 5MB gia non funzionava piu perche superava la quota di MB! Se vuoi postare la cartella, il file data.img e cache.img non devi lasciarli li, ci sono dati personali che occupano molto e non servono, mentre il system.img non dovrebbe essere molto grande poiche è jb, lo scatter dovrebbe essere in formato txt, la cartella senza data.img e cache.img dovrebbe essere compressa con winrar, nel frattempo preparo anche io una cartella con files di kitkat per farti provare l'upgrade, però dovrei adattare lo scatter alle tue partizioni, forse martedi potrò usare un wifi gratuito per postare files grandi, di solito posso usare max 300 MB al giorno con h3g per ora!
    Se sei sicuro del tuo backup, potresti anche provare se ti va bene il backup del mt6572 del master 501 che ho postato ad un altra discussione, però un po di rischio si corre, specialmente flashando il preloader e sec-ro e nvram, ma per il resto è molto simile, male che va si riflasha il backup del tuo mid7046! Certo è meglio provare il mio backup del mid7046, ma ho visto lo scatter tuo piu simile al master 501:
    https://www.mediafire.com/file/nillq...ashtool%29.rar


    Lo scatter è questo:

    ################################################## ################################################## ########
    #
    # General Setting
    #
    ################################################## ################################################## ########
    - general: MTK_PLATFORM_CFG
    info:
    - config_version: V1.1.1
    platform: MT6572
    project: MTDTtest
    storage: EMMC
    boot_channel: MSDC_0
    block_size: 0x20000
    ################################################## ################################################## ########
    #
    # Layout Setting
    #
    ################################################## ################################################## ########
    - partition_index: SYS0
    partition_name: PRELOADER
    file_name: preloader.bin
    is_download: true
    type: SV5_BL_BIN
    linear_start_addr: 0x0
    physical_start_addr: 0x0
    partition_size: 0x600000
    region: EMMC_BOOT_1
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: BOOTLOADERS
    reserve: 0x00

    - partition_index: SYS1
    partition_name: MBR
    file_name: MBR
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x600000
    physical_start_addr: 0x0
    partition_size: 0x80000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS2
    partition_name: EBR1
    file_name: EBR1
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x680000
    physical_start_addr: 0x80000
    partition_size: 0x80000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS3
    partition_name: PRO_INFO
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x700000
    physical_start_addr: 0x100000
    partition_size: 0x300000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: PROTECTED
    reserve: 0x00

    - partition_index: SYS4
    partition_name: NVRAM
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0xA00000
    physical_start_addr: 0x400000
    partition_size: 0x500000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: BINREGION
    reserve: 0x00

    - partition_index: SYS5
    partition_name: PROTECT_F
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0xF00000
    physical_start_addr: 0x900000
    partition_size: 0xA00000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: PROTECTED
    reserve: 0x00

    - partition_index: SYS6
    partition_name: PROTECT_S
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x1900000
    physical_start_addr: 0x1300000
    partition_size: 0xA00000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: PROTECTED
    reserve: 0x00

    - partition_index: SYS7
    partition_name: SECCFG
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x2300000
    physical_start_addr: 0x1D00000
    partition_size: 0x20000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: INVISIBLE
    reserve: 0x00

    - partition_index: SYS8
    partition_name: UBOOT
    file_name: lk.bin
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x2320000
    physical_start_addr: 0x1D20000
    partition_size: 0x60000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS9
    partition_name: BOOTIMG
    file_name: boot.img
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x2380000
    physical_start_addr: 0x1D80000
    partition_size: 0x600000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS10
    partition_name: RECOVERY
    file_name: recovery.img
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x2980000
    physical_start_addr: 0x2380000
    partition_size: 0x600000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS11
    partition_name: SEC_RO
    file_name: secro.img
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x2F80000
    physical_start_addr: 0x2980000
    partition_size: 0x40000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS12
    partition_name: MISC
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x2FC0000
    physical_start_addr: 0x29C0000
    partition_size: 0x80000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: INVISIBLE
    reserve: 0x00

    - partition_index: SYS13
    partition_name: LOGO
    file_name: logo.bin
    is_download: true
    type: NORMAL_ROM
    linear_start_addr: 0x3040000
    physical_start_addr: 0x2A40000
    partition_size: 0x300000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS14
    partition_name: EXPDB
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x3340000
    physical_start_addr: 0x2D40000
    partition_size: 0xA00000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: INVISIBLE
    reserve: 0x00

    - partition_index: SYS15
    partition_name: ANDROID
    file_name: system.img
    is_download: true
    type: YAFFS_IMG
    linear_start_addr: 0x3D40000
    physical_start_addr: 0x3740000
    partition_size: 0x2EE00000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS16
    partition_name: CACHE
    file_name: cache.img
    is_download: true
    type: YAFFS_IMG
    linear_start_addr: 0x32B40000
    physical_start_addr: 0x32540000
    partition_size: 0x17800000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS17
    partition_name: USRDATA
    file_name: data.img
    is_download: true
    type: YAFFS_IMG
    linear_start_addr: 0x4A340000
    physical_start_addr: 0x49D40000
    partition_size: 0xA22C0000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: true
    is_reserved: false
    operation_type: UPDATE
    reserve: 0x00

    - partition_index: SYS18
    partition_name: BMTPOOL
    file_name: NONE
    is_download: false
    type: NONE
    linear_start_addr: 0x9CF40000
    physical_start_addr: 0x9CF40000
    partition_size: 0x4E1C0000
    region: EMMC_USER
    storage: HW_STORAGE_EMMC
    boundary_check: false
    is_reserved: true
    operation_type: RESERVED
    reserve: 0x00
    Ultima modifica di Saldis; 03-04-17 alle 05:05

  14. Il seguente Utente ha ringraziato Saldis per il post:

    qwertino (03-04-17)

  15. #10
    Androidiano L'avatar di qwertino


    Registrato dal
    Jun 2012
    Messaggi
    296
    Smartphone
    Samsung Galaxy S8

    Ringraziamenti
    35
    Ringraziato 7 volte in 7 Posts
    Predefinito

    Ciao Saldis, innanzitutto grazie per la tua disponibilità.
    Ti ho inviato in PM il link della cartella !Files_to_FlashTool compressa.
    Fammi sapere se ti basta o se ti serve altro.

Pagina 1 di 6 123 ... ultimoultimo
Ultima pagina

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire risposte
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Torna su
Privacy Policy