ciao senti mi potresti dire dove hai trovato il firmware e la procedura per installarlo?
grazie steno...il forum è cambiato ma penso di aver trovato l'occorrente peccato sia tutto in inglese...spero non briccare il mio x8..
Questo è quello che ho seguito io
To flash the beta firmware, you need to:
1.) Download the beta firmware;
2.) Extract it;
3.) Install the Windows USB flash tool, downloading from:
http://minix.com.hk/downfile/USB_Bur...v2.0.1_x86.rar , choose "Install anyway" when system prompts for driver installation, then open the application, and choose English (picture 1 & 2);
4.) Connect the Micro USB cable supplied with the box between the OTG port of the box and your computer (Windows based);
5.) Power up the device while holding the "Recover" button located at the back of the hub;
6.) Upon successful connection the "Connect success" message will be displayed inside the application (picture 3);
7.) Load the firmware image by selecting "File -> Import image" (picture 4 & 5);
8.) After loading, check the 1st and 2nd box of "Configuration", "Erase flash" (Normal erase) and "Erase bootloader", then click "Start" (picture 6); DO NOT check the 3rd and 4th box for safety reasons (4th option would erase all keys such as MAC address, be careful)
9.) The upgrade process will take approximately 3-4 minutes, the last few % takes really long time, and you MUST make sure the power can't be disconnected during the upgrade or your box could become a brick;
10.) Upon successful upgrade, the application will display the message "Burning successfully" (picture 8), then it's safe to unplug the power and connect your hub back to the TV for 1st start (which is also very important);
Se vai sul sito trovi tutti i print screen
gabrielekykko (06-10-14)
Ciao a tutti....
Avevo pensato di prendere il minix x8-h per fare principalmente queste cose
Il minix verrebbe collegato ad un proiettore tramite l'hdmi
1- trasmettere dei video scaricati sulla sua memoria
2- trasmettere da un pc windows un video via wireless
3- far visualizzare sul proiettore quello che vedo sul pc talquale...
Posso farlo col minix?
Dunque...quel link per il download del firmware non funziona. Ho provveduto a scaricarlo altrove...ma ahimè dal file readme.txt mi accorgo che è la versione firmware per il solo utilizzo via sd card....e non ho sd card nei paraggi
Edit: sono riuscito a scaricare una versione per usb e ho installato la beta8 ma lo stream con Miracast non mi funziona lo stesso.
In foto ci sono i dettagli del fimware, etc.
Come mai?
Ultima modifica di androidhendrix; 15-10-14 alle 13:45
Si ok...la procedura la seguo correttamente ed infatti ascolto solo audio (leggo poi che hdcp non è supportato). Anch'io sono con S4.
Puoi vedere cortesemente se la versione del firmware è la stessa di quella che vedi nel mio screeshot?
Se no, dove l'hai scaricata quella versione?