KERNEL][4.2.x][4.3][4.4.x] Fancy Kernel

Quote:

---

Originariamente inviato da giuse03

Uscito fancy r54pre2...

---

ECCOLO fancy_kernel-tuna-4.4-pre54_2.zip

da Boype :

codice:

---

Hi all,

here's pre54_2. It is available from the OP.

I have tried to improve r53 even more in terms of smoothness and snappiness. While I think I succeeded, I'm eagerly awaiting your reports :)
There have been reports pre54_1 wasn't as fluid as r53, which is why I reverted those (yet unpublished) commits that caused that. pre54_2 should be veeery good!

---

Ciao a tutti io sono rimasto al pre45 ext perchè uso pgm/touch control, mi consigliate di aggiornare all'ultimo?

Quote:

---

Originariamente inviato da BOB85

Ciao a tutti io sono rimasto al pre45 ext perchè uso pgm/touch control, mi consigliate di aggiornare all'ultimo?

---

Certo,il touch control funziona lo stesso.metti il pre54

le impostazioni le lascio stock o mi consigli altro? Dimenticavo io uso ancora 4.3

Quote:

---

Originariamente inviato da BOB85

le impostazioni le lascio stock o mi consigli altro?

---

Cambia solo il governor su interactive, il resto lascia cosi

va bene anche su 4.3?

Sono con la versione r53 e nel giro di una settimana circa ho notato che le prestazioni sono peggiorate... lo fa anche a voi? Appena flashato è fluido da paura, poi più passano i giorni più comincia ad impuntarsi, ho provato anche a riavviare ma è praticamente uguale. Ho la OmniROM build del 24 luglio.

Personalmente mi pare che con il dirty fancy andava tutto meglio, sia in fluidità che in durata batteria.

Uscito r54pre3.. Ci sono 2 versioni, una una per 4.2 e superiore e una per 4.4...
Da Boype:
*pre54_3 (two packages: fixed RAMdisk & anykernel2) -> Android 4.2/4.3/4.4

Hi again,

here's pre54_3. I consider it an RC for r54. It is available from the OP.

The increased heat-production that was observed by some should be fixed, hopefully.



While r53 failed in terms of Android 4.2 / 4.3 compatibility, this really should be working now with the anykernel2 version provided: I tested it with a the stock CM11 kernel and everything was working fine. Even though my test was with a 4.4 kernel, there's no reason why it should not be working with 4.2 and 4.3. Thanks to @osm0sis*for his anykernel2 framework and his help!

There are two different files:

fancy_kernel-tuna-4.4-pre54_3.zip
... and ...
fancy_kernel-tuna-4.2+-pre54_3-anykernel2.zip

If you're in doubt which file is the right one for you, let me give a brief explanation:

___________________________________________


1) You're running Android 4.4 with stock kernel (e.g. ROMs: stock 4.4, CM11 or AOSP):You can use both files: fancy_kernel-tuna-4.2+-XXXX-anykernel2.zip or fancy_kernel-tuna-4.4-XXXX.zip
2) You're running Android 4.4 with a custom kernel (e.g. kernels: dirtyv or franco or even fancy kernel):You should be using this file: fancy_kernel-tuna-4.4-XXXX.zipAlternatively, you could dirty-flash your ROM (which needs to have a stock kernel, or this won't apply to you) and then use fancy_kernel-tuna-4.2+-XXXX-anykernel2.zip.Background info why this is the way it is: You need to ensure the RAMdisk that is modified by anykernel2 is clean. Anykernel2 extracts the current kernel's RAMdisk and modifies it. If you're having a custom kernel installed, the base for modification is 'contaminated', there might be wrong settings or files included.*You should never flash an anykernel2 kernel over another custom kernel!
3) You're running Android 4.3 or 4.2 with with stock kernel:You should be using this file: fancy_kernel-tuna-4.2+-XXXX-anykernel2.zip
4) You're running Android 4.3 or 4.2 with with a custom kernel (e.g. kernels: dirtyv or franco or even fancy kernel):You need to dirty-flash your ROM (which needs to have a stock kernel) and then use fancy_kernel-tuna-4.2+-XXXX-anykernel2.zip.Background info why this is the way it is: You need to ensure the RAMdisk that is modified by anykernel2 is clean. Anykernel2 extracts the current kernel's RAMdisk and modifies it. If you're having a custom kernel installed, the base for modification is 'contaminated', there might be wrong settings or files included.*You should never flash an anykernel2 kernel over another custom kernel!

raga ho messo quella per stock con anykernel....

devastante.