Quanto hai fatto con la Cfx ? :)
Visualizzazione stampabile
Metà di sta roba ignoravo perfino esistesse
FauxClock App recommended Settings"
CPU Control
- Max clock - GHz 1.512 GHz for performance, 1.242 GHz for battery
- Min clock - MHz 384 MHz for both
- CPU Governor - Intellidemand for performance AND battery
- mpdecision - Off
- Snake Charmer - OFF for performance, On for Battery
- Eco Mode - Off for performance, On for battery
- Set On Boot - On
SOC Control
- Set On Boot - On
- C0 - On
- C1 - On
- C3 - On (Note: N4 AP modem is very sensitive to some of the deeper sleep states, if you experienced Green/Yellow AP Modem Watchdog Bark screens, I recommend disabling C2/C3 states).
Voltage Control
- Set On Boot -
- Global CPU Voltage - mV
intellidemand gov control
- Up Threshold - 95 for both
- Up Threshold Any CPU Load - 85 for both
- Up Threshold Multi Core - 75 for both
- Boost Frequency - 1026000 for both
- Two Phase Freq - 1134000 for both
- Optimal Freq - 1242000 for both
- Synchro Freq - 756000 for both
- Set On Boot - On
GPU Control
- GPU Governor - Simple for both
- GPU Clock - 400 MHz for performance and 320 MHz for battery
- GPU Vsync Toggle - On for both
- Set On Boot - On for both
I/O Scheduler Control
- I/O Scheduler (eMMC) - FIOPS for both
- Readhead Size (eMMC) - 2048 for both
- Set On Boot - On for both
Misc Control
- Dynamic File Sync - On for both
- TCP Congestion Control - Westwood for both
Vibration Control
- Set On Boot - On for both
- Vibration Control - 70 for both
Screen Color
- Set On Boot - On for both
- Factory Presets - LG Presets
- Color Adjustments - R, G, B 255, 250, 245
- Gamma Amp Adjust 0 - R, G, B 13, 20, 22
- Gamma Amp Adjust 1 - R, G, B 0, 2, 3
Z-Control
- Set On Boot - On for both
- ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
- ZRAM Enable/Disable - Enable if you mult-task often
- Clear VFS Cache After Boot - On
- Auto FS Writeback Delay Mode - On
- Swappiness - 100% if ZRAM enabled, 0% if disabled
- VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
- Dirty Ratio - 20% for both
- Dirty Background Ratio - 5% for both
Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
Updated on September 6, 2013
Disponibile versione 7.2. ciao;)
Appena montata la 7.2 mi sembra migliorata
Quote:
Originariamente inviato da pertini90
Sai dirmi se funziona viper?
Inviato dal mio Nexus 4 usando Androidiani App
http://forum.xda-developers.com/show....php?t=2372132
Col kernel stock ho fatto 1690 su geekbench 3.