Metà di sta roba ignoravo perfino esistesse
FauxClock App recommended Settings"
CPU Control
- Max clock - GHz 1.512 GHz for performance, 1.242 GHz for battery
 - Min clock - MHz 384 MHz for both
 - CPU Governor - Intellidemand for performance AND battery
 - mpdecision - Off
 - Snake Charmer - OFF for performance, On for Battery
 - Eco Mode - Off for performance, On for battery
 - Set On Boot - On
 
SOC Control
- Set On Boot - On
 - C0 - On
 - C1 - On
 - C3 - On (Note: N4 AP modem is very sensitive to some of the deeper sleep states, if you experienced Green/Yellow AP Modem Watchdog Bark screens, I recommend disabling C2/C3 states).
 
Voltage Control
- Set On Boot -
 - Global CPU Voltage - mV
 
intellidemand gov control
- Up Threshold - 95 for both
 - Up Threshold Any CPU Load - 85 for both
 - Up Threshold Multi Core - 75 for both
 - Boost Frequency - 1026000 for both
 - Two Phase Freq - 1134000 for both
 - Optimal Freq - 1242000 for both
 - Synchro Freq - 756000 for both
 - Set On Boot - On
 
GPU Control
- GPU Governor - Simple for both
 - GPU Clock - 400 MHz for performance and 320 MHz for battery
 - GPU Vsync Toggle - On for both
 - Set On Boot - On for both
 
I/O Scheduler Control
- I/O Scheduler (eMMC) - FIOPS for both
 - Readhead Size (eMMC) - 2048 for both
 - Set On Boot - On for both
 
Misc Control
- Dynamic File Sync - On for both
 - TCP Congestion Control - Westwood for both
 
Vibration Control
- Set On Boot - On for both
 - Vibration Control - 70 for both
 
Screen Color
- Set On Boot - On for both
 - Factory Presets - LG Presets
 - Color Adjustments - R, G, B 255, 250, 245
 - Gamma Amp Adjust 0 - R, G, B 13, 20, 22
 - Gamma Amp Adjust 1 - R, G, B 0, 2, 3
 
Z-Control
- Set On Boot - On for both
 - ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
 - ZRAM Enable/Disable - Enable if you mult-task often
 - Clear VFS Cache After Boot - On
 - Auto FS Writeback Delay Mode - On
 - Swappiness - 100% if ZRAM enabled, 0% if disabled
 - VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
 - Dirty Ratio - 20% for both
 - Dirty Background Ratio - 5% for both
 
Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
Updated on September 6, 2013
NEXUS 4
Mirage Kernel
SlimKat
haget (30-09-13)
Disponibile versione 7.2. ciao![]()
Nexus 4 - twrp 2.7.1.0 - android 4.4
Appena montata la 7.2 mi sembra migliorata
Originariamente inviato da pertini90
Sai dirmi se funziona viper?
Inviato dal mio Nexus 4 usando Androidiani App
http://forum.xda-developers.com/show....php?t=2372132
Col kernel stock ho fatto 1690 su geekbench 3.
NEXUS 4
Mirage Kernel
SlimKat