[KERNEL] [MM] [N4] YaYPrime

Vi presento questo KERNEL (attualmente sul mio N4) per MM su N4

PREMESSA: ne IO ne ANDRODIANI siamo responsabili per eventuali rotture del vostro device determinate da questa guida

Questo kernel è basato su 3.4.0 mr1.1 kernel di google e con l'aggiunta di tutto quanto occorra per renderlo funzionale per MM su N4

THANKS to: yaymalaga

3D su XDA DEVELOPER: QUI

FEATURES

Spoiler:

- Based on official 3.4.0 mr1.1 mako kernel
- Compiled using the lastest version of uber 4.9, optimized for cortex-a15
- Anykernel2
- Mako_hotplug as the only hotplug
- FranciscoFranco's thermal
- FranciscoFranco's gamma control
- Frequency limitator on screen-off (1026mhz by default)
- Voltage control
- Cpu Overclock of 1.7ghz (1.5ghz by default)
- Gpu Overlock of 480mhz (400mhz by default)
- Ondemand, simple and performance as gpu governors
- Ondemand, performance, conservative and interactive as cpu governors
- Deadline, zen, fiops, cfq, bfq, row as i/o schedulers
- Stratosk's Ondemand governor version (by (default)
- Franco's Convervative governor version
- Taurus' Interactive governor version
- Faux's Sound Control
- Readhead set in 512kb by default
- Graphite and neon optimizations
- Otg support
- Kexec (multirom)
- DT2W
- Fastcharge
- A lot of improvements and optimizations

DOWNLOADS
AOSP https://www.androidfilehost.com/?w=files&flid=42219
CM https://www.androidfilehost.com/?w=files&flid=47776

INSTALLAZIONE
If you come from another kernel:
- Reboot in recovery mode
- Dirty-flash the rom you are using (without wipes)
- Flash kernel

If you come from a previous version:
- Reboot in recovery mode
- Flash kernel
(If you find something weird, wipe dalvik/cache)

CHANGELOG

Spoiler:

R3:
- Re-done from R1
- Fixes everywhere, no more lags on chrome
- Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me)
- Merged all patches from 6.0.1 and the latest ones from 3.4 branch
- Added cpu underclock to 192mhz (384mhz by default)
- Updated interactive governor (ondemand by default)
- F2FS support (Need to be tested)
- Core optimizations (mutex, futex, sched, etc)
- Selinux improvements for smoothness
- Cfq i/o scheduler optimized (the other ones are removed until next release)
- Added missing Faux soundcontrol commits
- Cpu management improvements
- DT2W and T2W
- CM version added
R2:
- Compiled using lastest uber 4.9 (compiled by me, optimized for cortex-a15)
- Graphite and neon enabled
- Makefile and flags optimizations
- Compiler and cortex-a15 optimizations
- A lot of optimizations in the I/O, and new schedulers:
- Row added and tuned up
- Deadline updated and tuned up
- Cfq updated and tuned up
- Bfq (v7-r8) added and tuned up
- Zen added and tuned up
- Fiops added and tuned up
- Kexec support
- DT2W support (from Stratosk)
- Fastcharge support
- OTG support (theoretically)
- Interactive governor fixes (now uses lower freq)
- Fixes and optimizations for camera, gpu, etc
- Some improvements in general

R1:
- Initial version

Contributors: yaymalaga
Source Code: https://github.com/yaymalaga/yayPrime_kernel

Version Information
Status: Stable

Created 2015-10-25
Last Updated 2016-01-15

Riservato 1

Riservato 2

Uscita versione R3 ed unitamente alla versione AOSP ora c'è anche la versione CM
Changelog della R3:

Re-done from R1
- Fixes everywhere, no more lags on chrome
- Build using latest Uber 5.3.1 (optimized for cortex-a15 - compiled by me)
- Merged all patches from 6.0.1 and the latest ones from 3.4 branch
- Added cpu underclock to 192mhz (384mhz by default)
- Updated interactive governor (ondemand by default)
- F2FS support (Need to be tested)
- Core optimizations (mutex, futex, sched, etc)
- Selinux improvements for smoothness
- Cfq i/o scheduler optimized (the other ones are removed until next release)
- Added missing Faux soundcontrol commits
- Cpu management improvements
- DT2W and T2W
- CM version added

Grazie per l'info...
Che software usi per cambiare i parametri? Va bene quello di Franco?
Gabriele

Quote:

Originariamente inviato da karlele

Grazie per l'info...
Che software usi per cambiare i parametri? Va bene quello di Franco?
Gabriele

DI nulla ;)
Io uso il Trikster MOd, ma credo che quello di Franco (FKUpdater) possa andare altrettanto bene :)
Così coem potresti provare anche Kernel Adiutor[ (sempre dallo store) spesso consigliato su XDA Developer