[GUIDA] Moto G - Installazione firmware stock tramite comando FASTBOOT

[phaber87]

yeah sta andando, per root e recovery uso il mototool?

[NiloGlock]

yeah sta andando, per root e recovery uso il mototool?

Indifferente..

Stiamo andando OT, dunque se hai altre domande da fare sul modding chiedi nel thread SOS.

[Mattemaio]

Salve ragazzi,
ho avuto qualche problema con una ROM, ed adesso il mio moto g va in bootloop...stavo provando a seguire la guida per installare KK Stock, ma dopo il primo comando si blocca con la scritta:

C:\Users\Antonello\Desktop\Stock>mfastboot flash partition gpt.bin
< waiting for device >

E non fa altro...Ho usato AdbDriverInstaller.exe, per i driver.

[NiloGlock]

Salve ragazzi,
ho avuto qualche problema con una ROM, ed adesso il mio moto g va in bootloop...stavo provando a seguire la guida per installare KK Stock, ma dopo il primo comando si blocca con la scritta:

C:\Users\Antonello\Desktop\Stock>mfastboot flash partition gpt.bin
< waiting for device >

E non fa altro...Ho usato AdbDriverInstaller.exe, per i driver.

Scrivi un "fastboot devices" sul prompt e riporta tutto qui.

[Mattemaio]

Scrivi un "fastboot devices" sul prompt e riporta tutto qui.

Spoiler:

C:\Users\Antonello\Desktop\Stock>adb fastboot devices Android Debug Bridge version 1.0.31 -a - directs adb to listen on all interfaces for a c onnection -d - directs command to the only connected USB devic e returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is r unning. -s <specific device> - directs command to the device or emulator with the given serial number or qualifier. Overrides ANDROID_S ERIAL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. -H - Name of adb server host (default: localhost) -P - Port of adb server (default: 5037) devices [-l] - list all connected devices ('-l' will also list device qualifiers) connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this command with no additional arguments will disconnect from all connected TCP/IP devic es. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward --list - list all forward socket connections. the format is a list of lines with the followin g format: <serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote> - same as 'adb forward <local> <remote>' but fail s if <local> is already forwarded adb forward --remove <local> - remove a specific forward socket connection adb forward --remove-all - remove all forward socket connections adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> -- iv <hex-encoded iv>] <file> - push this package file to the device and instal l it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data ) ('-s' means install on SD card instead of inter nal storage) ('--algo', '--key', and '--iv' mean the file is encrypted already) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories ) adb bugreport - return all information from the device that should be included in a bug report. adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>] - write an archive of the device's data to <file> . If no -f option is supplied then the data is wr itten to "backup.ab" in the current directory. (-apk|-noapk enable/disable backup of the .apks themselves in the archive; the default is noapk.) (-obb|-noobb enable/disable backup of any insta lled apk expansion (aka .obb) files associated with each applic ation; the default is noobb.) (-shared|-noshared enable/disable backup of the device's shared storage / SD card contents; the defau lt is noshared.) (-all means to back up all installed applicatio ns) (-system|-nosystem toggles whether -all automat ically includes system applications; the default is to inclu de system apps) (<packages...> is the list of applications to b e backed up. If the -all or -shared flags are passed, then t he package list is optional. Applications explicitly g iven on the command line will be included even if -nosys tem would ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup archive adb help - show this help message adb version - show version num scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb get-devpath - prints: <device-path> adb status-window - continuously print device status for a specifie d device adb remount - remounts the /system partition on the device re ad-write adb reboot [bootloader|recovery] - reboots the device, optionally into the boo tloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on th e specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be u pdated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync , sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes prior ity over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these de bug tags are printed.

Non sono sicuro sia ciò che chiedevi...in caso cancella pure!

[NiloGlock]

Spoiler:

C:\Users\Antonello\Desktop\Stock>adb fastboot devices Android Debug Bridge version 1.0.31 -a - directs adb to listen on all interfaces for a c onnection -d - directs command to the only connected USB devic e returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is r unning. -s <specific device> - directs command to the device or emulator with the given serial number or qualifier. Overrides ANDROID_S ERIAL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. -H - Name of adb server host (default: localhost) -P - Port of adb server (default: 5037) devices [-l] - list all connected devices ('-l' will also list device qualifiers) connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this command with no additional arguments will disconnect from all connected TCP/IP devic es. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward --list - list all forward socket connections. the format is a list of lines with the followin g format: <serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote> - same as 'adb forward <local> <remote>' but fail s if <local> is already forwarded adb forward --remove <local> - remove a specific forward socket connection adb forward --remove-all - remove all forward socket connections adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> -- iv <hex-encoded iv>] <file> - push this package file to the device and instal l it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data ) ('-s' means install on SD card instead of inter nal storage) ('--algo', '--key', and '--iv' mean the file is encrypted already) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories ) adb bugreport - return all information from the device that should be included in a bug report. adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>] - write an archive of the device's data to <file> . If no -f option is supplied then the data is wr itten to "backup.ab" in the current directory. (-apk|-noapk enable/disable backup of the .apks themselves in the archive; the default is noapk.) (-obb|-noobb enable/disable backup of any insta lled apk expansion (aka .obb) files associated with each applic ation; the default is noobb.) (-shared|-noshared enable/disable backup of the device's shared storage / SD card contents; the defau lt is noshared.) (-all means to back up all installed applicatio ns) (-system|-nosystem toggles whether -all automat ically includes system applications; the default is to inclu de system apps) (<packages...> is the list of applications to b e backed up. If the -all or -shared flags are passed, then t he package list is optional. Applications explicitly g iven on the command line will be included even if -nosys tem would ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup archive adb help - show this help message adb version - show version num scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb get-devpath - prints: <device-path> adb status-window - continuously print device status for a specifie d device adb remount - remounts the /system partition on the device re ad-write adb reboot [bootloader|recovery] - reboots the device, optionally into the boo tloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on th e specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be u pdated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync , sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes prior ity over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these de bug tags are printed.

Non sono sicuro sia ciò che chiedevi...in caso cancella pure!

No, io intendevo

fastboot devices

tu hai digitato

adb fastboot devices

questo comando è inesistente. Ho messo il testo sotto spoiler perchè occupava mezza pagina.

[Mattemaio]

No, io intendevo

fastboot devices

tu hai digitato

adb fastboot devices

questo comando è inesistente. Ho messo il testo sotto spoiler perchè occupava mezza pagina.

Ho visto e hai fatto benissimo!
E' che ho cambiato ora PC e non ho ancora gli SDK Manager (che sto scaricando). Quindi mi dava comando inesistente, ed ho provato così...appena posso ti faccio sapere.

PS: con adb devices, ora mi riconosce il dispositivo.

EDIT: Ho fatto un po' di confusione, il comando di prima l'ho lanciato nella cartella "mfastboot" che è nel link della guida.

[NiloGlock]

Ho, visto e hai fatto benissimo!
E' che ho cambiato ora PC e non ho ancora gli SDK Manager (che sto scaricando). Quindi mi dava comando inesistente, ed ho provato così...appena posso ti faccio sapere.

PS: con adb devices, ora mi riconosce il dispositivo.

L'SDK non serve, hai bisogno solo del firmware e di mfastboot.

[Mattemaio]

L'SDK non serve, hai bisogno solo del firmware e di mfastboot.

C:\Users\Antonello\Desktop\Stock>fastboot devices
"fastboot" non è riconosciuto come comando interno o esterno,
un programma eseguibile o un file batch.


Questo l'ho lanciato dalla cartella di mfastboot.

[NiloGlock]

C:\Users\Antonello\Desktop\Stock>fastboot devices
"fastboot" non è riconosciuto come comando interno o esterno,
un programma eseguibile o un file batch.


Questo l'ho lanciato dalla cartella di mfastboot.

Dato che adb hai detto di averlo rilevato, prova a flashare il firmware.

Entra in fastboot e segui la procedura descritta al primo post.