[KERNEL][ICS/JB][ExTweaks][All-in-1kernel][DualBoot][Eargasm] SiyahKernel v4.x.x

Quote:

---

Originariamente inviato da sommesepino

Quindi va meglio????

Inviato dal mio GT-I9100 con Tapatalk 2

---

si va decisamente meglio.

Io cmq sono tornato al kernel 3.5.2 ottimo drain di batteria e ottima performance.
La versione 3.6 invece consumava veramente in maniera eccessiva.

Quote:

---

Originariamente inviato da ROX77

Spettacolare! Installata ;)

---

Non tenerla sempre attiva perché consuma batteria. Usala di tanto in tanto per monitorare

Inviato dal mio GT-I9100 con Tapatalk 2

E' USCITA LA NUOVA CREATURA

Siyah v3.2.6.1
Posted on May 24, 2012

Changelog:
. new usb host driver. works fine with mouse, usb sticks and serial port adapters.
. some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
. fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
. changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
. disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
. added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
. just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

UPDATE: 27/5 wifi signal strength/5GHz problems and some other small fixes & tweaks

Inviato dal mio GT-I9100 con Tapatalk 2

Wifi FUNZIONANTE!!!
Era ora!!
In test
Speriamo bene!

Inviato dal mio GT-I9100 con Tapatalk 2

Quote:

---

Originariamente inviato da illuminato67

E' USCITA LA NUOVA CREATURA

Siyah v3.2.6.1
Posted on May 24, 2012

Changelog:
. new usb host driver. works fine with mouse, usb sticks and serial port adapters.
. some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
. fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
. changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
. disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
. added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
. just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

UPDATE: 27/5 wifi signal strength/5GHz problems and some other small fixes & tweaks

Inviato dal mio GT-I9100 con Tapatalk 2

---

E vediamo se ha risolto un po di problemi.
In download

EDIT ancora deve caricare i file.

Inviato dal mio GT-I9100 con Tapatalk 2

Quote:

---

Originariamente inviato da illuminato67

E' USCITA LA NUOVA CREATURA

Siyah v3.2.6.1
Posted on May 24, 2012

Changelog:
. new usb host driver. works fine with mouse, usb sticks and serial port adapters.
. some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
. fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
. changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
. disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
. added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
. just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

UPDATE: 27/5 wifi signal strength/5GHz problems and some other small fixes & tweaks

Inviato dal mio GT-I9100 con Tapatalk 2

---

infatti....
da dove l'hai preso??
controlla la versione nelle info

vediamo se ha lavorato seriamente ;)

fregato illuminato :)
ha già cambiato versione...lol
cominciamo bene.....

Siyah v3.2.6.2
new usb host driver. works fine with mouse, usb sticks and serial port adapters.
some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

UPDATE: 27/5 wifi signal strength/5GHz problems and some other small fixes & tweaks
legacy hotplug default for other governors than pegasusq and hotplug.

opssss, not found il download, giochiamo a mosca cieca ? rotfl

Quote:

---

Originariamente inviato da myrianto

fregato illuminato :)
ha già cambiato versione...lol
cominciamo bene.....

Siyah v3.2.6.2
new usb host driver. works fine with mouse, usb sticks and serial port adapters.
some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details

UPDATE: 27/5 wifi signal strength/5GHz problems and some other small fixes & tweaks
legacy hotplug default for other governors than pegasusq and hotplug.

Recovery)[/URL]

---

Quote:

---

Originariamente inviato da dieguccio

opssss, not found il download, giochiamo a mosca cieca ? rotfl

---

ok ho aggiustato il link
rimuovi quelli dal tuo quote