Si, ma se la tua versione della Cyano sfrutta i driver Mali devi per forza rimanere con la serie 7...
Visualizzazione stampabile
La 7.15 dopo qualche ciclo comincia ad andar bene su CMX10 del 07/11
http://img526.imageshack.us/img526/8...2111219535.pnghttp://img829.imageshack.us/img829/1...2111219540.png
Sent from Tapatalked JB GT~i9100
Esattamente è quello che sto cercando di capire come si fa anche io, ma sia con HYPER che con PegasusQ mi sfrutta maggiormente le frequenze alte... Se hai novità scrivimi qualcosa :D Parto con il secondo ciclo io invece... Comunque se usi Ondemand/Ondemand non ti conviene di disabilitare la voce CORTEXBRAIN?
HYPER e Pegasusq sono abbastanza reattivi come governor dobbiamo provare con quelli un po meno reattivi tipo ondemand, Sleepy, scary e conservative.
Bella domanda... I cortexbrain non servono solo x il cambio di governor ma associati al profilo EXTREME BATTERY contribuiscono al risparmio energetico a discapito delle performance....
Ora provo a cambiare solo il governor e tenerli attivati.... Se ho lag li disattivo.
Stampato su carta Kodak.... CIRIBIRIBÍ Kodak!
Ritorno alla JellyBAM + Dori 5.90, e i risultati si vedono :D.
Allegato 32706
Allegato 32708
scaling_max_freq=1000000
scaling_min_freq=200000
smooth_level0=8
scaling_governor=ondemand
load_l1=20
load_h0=20
min_rq=2
load_rq=20
rate=100
freq_min=800000
GENTLE_FAIR_SLEEPERS=off
ARCH_POWER=on
cpu_undervolting=-50
enable_mask=3
sched_mc_power_savings=0
busfreq_up_threshold=80
scaling_max_suspend_freq=500000
scaling_min_suspend_freq=200000
deep_sleep=ondemand
standby_freq=200000
wakeup_delay=0
wakeup_boost=5
mali_touch_boost_level=0
mali_use_vpll=off
mali_gpu_utilization_timeout=150
GPUFREQ1=62
GPUFREQ2=108
GPUFREQ3=160
GPUFREQ4=200
GPUFREQ5=267
GPUVOLT1=800
GPUVOLT2=850
GPUVOLT3=900
GPUVOLT4=950
GPUVOLT5=1000
GPUTHRESHOLD1UP=80
GPUTHRESHOLD2DOWN=50
GPUTHRESHOLD2UP=80
GPUTHRESHOLD3DOWN=50
GPUTHRESHOLD3UP=80
GPUTHRESHOLD4DOWN=50
GPUTHRESHOLD4UP=80
GPUTHRESHOLD5DOWN=50
mov_hysti=1
min_bl=30
min_gamma=1
max_gamma=20
power_reduce=on
user_mode=on
user_cb=127
user_cr=127
mdniemod=on
user_gamma_adjust=0
pwm_val=50
tsp_touch_freq=500000
tsp_slide2wake=off
mdnie_shortcut_enabled=off
dyn_brightness=off
fbearlysuspend_delay0=50
negative_tweak=1
TOUCHSCREEN1=50
TOUCHSCREEN2=37
TOUCHSCREEN3=15
TOUCHSCREEN4=53
TOUCHSCREEN5=35
TOUCHSCREEN6=47
soundgasm_hp=0
sound_volume1=0
sound_volume2=0
sound_volume3=0
gesture_tweak=off
notification_enabled=off
bln_switch=2
notification_timeout=300000
led_timeout_ms=1000
blnww=off
led_fadeout=on
led_on_touch=off
touchkey_brightness=2700
dyn_brightness=off
logger=off
max_cpu_lock=2
adb_mode=0
supplicant_scan_interval=360
wifi_pwr=on
init_d=off
zramtweaks=4
gpsregion=Europe
scheduler=fiops
sleep_scheduler=noop
usb_mode=default
default_stats=off
chargecurrent1=650
chargecurrent2=650
chargecurrent3=450
install_root=on
cortexbrain_background_process=1
cortexbrain_auto_tweak_brightness=off
cortexbrain_auto_tweak_wifi=off
android_logger=auto
cortexbrain_firewall=on
cortexbrain_tcp=on
cortexbrain_ipv6=off
cortexbrain_cpu=on
cortexbrain_memory=on
cortexbrain_battery=on
cortexbrain_system=on
cortexbrain_kernel_tweaks=on
cortexbrain_io=on
Sent from Tapatalked JB GT~i9100
Importante per chi utilizza le gesture:
http://forum.xda-developers.com/show...php?p=34027965
Stampato su carta Kodak.... CIRIBIRIBÍ Kodak!
Grazie Leo ^^ ora ho impostato il settaggio battery e messo qualche cosina tipo Hyper, uv -75 e altre cosucce mie rotfl domani testo... sono due giorni che non flasho comunque! rotfl rotfl DOMANDA: come faccio a monitorare i processi/app/servizi che rimangono attivi nel deep?
Uscito il 7.16... Provato qlc?
Inviato dal mio GT-I9100 con Tapatalk 2
New Kernel 7.16 ICS-JB-MALI Uploaded!
Change Log:
*Reduced kernel size by 550KB! it's give us more room for new code.
nothing removed, just compressed better.
*Added modules for serial cable, to connect to console ports of network hardware, who need that, know how to use it, all the rest ignore this :)
*Fixed Cortex service killed in long deepsleep, and we lose all tweaks and CPU stuck in 600Mhz or min 1Ghz... should be OK now.
*Fixed Crontab timezone config, now all jobs will be on time for all.
But in logs it's will show the UTC timezone time, not your time. but task was done as should. tested many times, and it's works great.
There is a possibility to add custom tasks, i have created script for that.
see initramfs git and check the CRON commits, all there with notes :)
*Fixed some messages that return to screen on pushing things at STweaks, now all work as should.
*Reduced DEBUG messages pushed to dmesg every 3~5 sec, may help to save little bit of battery, and clean the mess to i can see what really important.
*Trying to restore normal support for MIUI ROMS, please test with MIUI ROM if DATA and WIFI working.
*New ZRAM swap driver ported and tuned by VOKU! it's now faster and smarter, and less CPU demanding.
but to load ZRAM swao above 50MB you will have to use hacked services.jar for your ROM, or ROM task killer, shutdown other services and apps and release RAM, so ZRAM has nothing to do to help. and it's remain at 0 use, or 5~30MB usage.
*No longer need to switch to development ADB for JB ROM, now it's loaded by auto, and option is removed from STweaks.
*Gestures code is now shutdown by auto in code level if screen is OFF. Code fix by GM!
*kantjer managed to compress recovery image and saved us 50KB free space. and in kernel every 10KB is good to have free.
(he have removed 25KB from each image, we have 2 the same, one as logo, second as logo when we install something.)
Have fun and report if more bugs found.
or old ones still kicking :)
INVIATO DA ? CON IL MIO S?
dalla 7.15.1 con la 7.16 molto migliorata la velocità e lag. Domani farò il primo ciclo :)
Inviato dal mio GT-I9100 usando Androidiani App
ATTENZIONE per chi ha scaricato e flashato il 7.16 non appena è stato messo su: da pochi minuti è stato riuppato per correggere un problema sul cron tasks. meglio quindi riscaricare e riflashare.
Nuovo 7.16 con correzione bug
Inviato con il mio S2 CM10
On air 7.16
Inviato con il mio S2 CM10
Come si resetta extweak sulla secondary?
Inviato dal mio GT-I9100 usando Androidiani App
Buongiorno a tutti!! Domanda per voi: se aggiorno la cyano e subito dopo rimetto lo stesso kernel, i cicli che ho fatto si azzerano?
Inviato dal mio GT-I9100 con Tapatalk 2
Non so proprio cosa scegliere per la Ollo Creature, Dori 7.16, 5.92 o 7.4.2, premetto che non mi serve il dual boot
In test il 7.16 con settaggi personali senza UV...Piu tardi diro la mia...
ragazzi sono cosi importanti i driver mali ? altrimenti passo al dorimanx 5.92 e cambio rom
Raga ogni tanto ho qualche riavvio... ho solo fatto un UV di -50 a CPU e gpu , messo il task della RAM e lo slide2wake ... cosa potrebbe essere di queste cose?
Ho la ROM RB 3.2
Inviato dal mio GT-I9100 con Tapatalk 2
Ovviamente l'uv!
O il tuo cellulare nn lo regge, oppure la versione del kernel nn supporta qsto uv (t consiglio d provare cn altro programma oltre a extweaks)...
Oppure una serie d cause! Prova uv meno spinto e vedi se risolvi...
Inviato con aereoplanino di carta!
e' uscita la versione 7.16, cmq per ora sono rimasto alla 7.8 visto che quelle successive e soprattutto le ultime mi hanno dato grossissimi immensi problemi
i am removing 7.16
fixing the small bugs, and upload again. :)
will not take long.
Edit:
ReUploaded kernel 7.16
Kernel_Dorimanx-V7.16-ICS-JB-02-41--13-11-12-SG2-PWR-CORE
*Updated Support for MIUI roms.
*Fixed CRON job file
for 100% fix please turn off cron main switch
and delete folder
/system/etc/cron.d
then turn on cron switch in STweaks.
*Fixed restore profiles via STweaks.
now all ok :)
Inviato da Dori Mobile
Batteria devo valutare troppi flash oggi, ma cron mi in casina le app e basta lo sconsiglio
Inviato dal mio GT-I9100 usando Androidiani App
7.13 nemmeno mi si accendeva...freeze infiniti...