Visualizzazione stampabile
-
Mpokang kernel
Questo kernel cerca di utilizzare tutta la ram utile del nosto Gnex
Come sappiamo, il Gnex ha 1GB di RAM. Una grande parte di essa (300 + MB) è riservata per varie cose.
E 'davvero necessario? No, sembra che la RAM utilizzabile reale può essere molto molto di più.
As of v10, three (3) variations of Mpokang kernel for everyone to choose according to his needs.
Performance is the same, only the available RAM changes:
SuperRAM: 773 MB RAM -- Some rare video apps (or the gay CM video camera) may not work properly.
CM "gay" : 762 MB RAM -- All video apps work OK but still 720p, suitable for CM based roms.
1080p version: 751 MB RAM -- 1080p fully working, compatible with everything, even Android 4.2.2.
To sum up: For Android 4.3 all variations are applicable. For Android 4.2.2 ONLY the 1080p variation applies.
NOTE:
Kernel source: https://github.com/mpokwsths/mpokang_kernel
v10 SuperRAM: https://www.dropbox.com/s/09uf2hr3ql...0_SuperRAM.zip
v10 CM: https://www.dropbox.com/s/99q4zxqucr...nel-v10_CM.zip
v10 1080p: https://www.dropbox.com/s/hl23lwajy6...-v10_1080p.zip
download vecchie versioni: https://www.dropbox.com/sh/npchdph4n93xa9w/88DOt-ixEV
DOWNLOAD VERSIONI PER 4.4.x
v10 1080p:https://www.dropbox.com/s/hl23lwajy6...-v10_1080p.zip
v10 CM:https://www.dropbox.com/s/hl23lwajy6...-v10_1080p.zip
v10 SuperRAM:http://www.mediafire.com/download/b2...perRAM-4.4.zip
DOWNLOAD VERSIONE SUPErRAM PER 4.4.2(risolve il problema su cm11 della percentuale batteria sballata):
http://www.mediafire.com/download/a3...rRAM-4.4.2.zip
pagina ufficiale su XDA: [KERNEL] [4.3] Mpokang Kernel ver. 4 [Max RAM] | Galaxy Nexus > XDA
GUIDA ALL'INSTALLAZIONE:
-Download Kernel ultima versione
-Entrare in recovery
-Wipe cache
-Wipe dalvick-cache
-Flash Kernel
-Reboot system
FAQs:
Q: The cpu load is constantly over 50%, CPU speed doesn't drop to minimum, the phone doesn't sleep, I have problems with the CPU management part.
A: It is because you didn't have a clean rom when you flashed the kernel. Format system partition, flash rom, gapps and then the Mpokang kernel.
Q: My camera doesn't load.
A: Flash another kernel, change video to 720p, and then flash again Mpokang kernel.
Q: I have trouble running apps like Video editor, video calling in some apps.
A: Some rare apps don't like this RAM reclaiming. They try to use more RAM than
Q: My screen colors seem a bit changed. Even if I change them like I used to in TricksterMod...
A: It's because of Purple Tint Fix. Many users experience that ugly tint, and this kernel cures it. Slightly change your color settings in Trickster. If, whatever you do, the colors look bad, report it here and I will see what I can do.
Q: Will there be a version of this kernel with 1080p video support?
A: Yes, later on. But do not expect 770+ MB available RAM.
Q: I want the full 1GB of RAM. Is this possible?
A: No, full 1GB is unachievable (with TI's ION code). But if someone is willing to drop all the media support (camera, video, media playback) close to 900MB is achievable.
-
Changelog:
Ver. 8
- Several mutex code commits (multithreading optimization)
------ ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+
------ mutex: place lock in contended state after fastpath_lock failure
------ ARM: mutex: use generic atomic_dec-based implementation for ARMv6+
------ mutex: dynamically disable mutex spinning at high load
- Added VUSIM voltage regulation. This is a screen regulator, so undervolting it should save some power (I have it at 1500mV without problems)
- ARM: mm: lazy cache flushing on non-mapped pages
- A couple of cache related optimizations for Cortex-A9
- Set default temperature limit @ 75C. Should be absolutely safe.
- voltage.h: Set VDDMIN to 810 - Smartreflex calibrated MPU min voltage now is 810mV
- Set kernel/scheduler timer to 300Hz (was 128Hz).
- i2c: use usleep_range to wait instead of msleep (imoseyon reported potential performance benefits)
- ARM: 7178/1: fault.c: Port OOM changes into do_page_fault
- readahead: fault retry breaks mmap file read random detection
- Some scheduler improvements?
-
Personalmente lo ritengo il miglior kernel mai provato sul mio gnex da quasi 2 anni a questa parte...batteria nella media e fluidità immensa.
Vi faccio il mio esempio: mi sono sempre dovuto limitare nel mettere app o widget, in quanto dopo un tot il cell iniziava a laggare, da quando monto questo kernel, mi sono permesso di avere 330 app installate, escludendo quelle di sistema, 11 widget suddivisi su 5 home, widgetlocker con altri 4 widget, tema bluemint graficamente stupendo ma di una pesantezza infinita, icone modificate, e la memoria interna libera pari a 1,5 Gb, e il tutto è di una fluidità incredibile. io consiglio vivamente di provarlo. ha dato nuova vita al mio Gnex a quasi 2 anni dall'acquisto
-
Che versione stai usando? L'ultima?
-
Quote:
Originariamente inviato da
slv96
Che versione stai usando? L'ultima?
La 4.2...l'ultima uscita questa mattina
-
Lo posso installare sulla crdroid? In pratica faccio wipe flash rom e flash kernel giusto?
Inviato dal mio Galaxy Nexus usando Androidiani App
-
Quote:
Originariamente inviato da
mendol
Lo posso installare sulla crdroid? In pratica faccio wipe flash rom e flash kernel giusto?
Inviato dal mio Galaxy Nexus usando
Androidiani App
Io ce l'ho su crdroid... Io ogni volta faccio wipe, flash rom, reboot, rivedo in ricovero, wipe e flash kernel e reboot... Non so se faccio un passaggio in più, ma così non ho mai avuto problemi
-
lo sto flashando ora. vediamo come si comporta
-
Uscita versione V5:
DOWNLOAD Version 5 with Hardware floating point processing: https://www.dropbox.com/s/qtrqqdrhyp...-HardFloat.zip
DOWNLOAD Version 5 with Software floating point processing: https://www.dropbox.com/s/469tobn1la...-SoftFloat.zip
changelog Ver. 5:
- Updated Linux kernel 3.0.88 --> 3.0.94
- Enabled ZRAM from kernel 3.7 (thanks Boype & Faux)
- Disabled Cleancache & Zcache
- Some more battery preservation additions
- Enabled full Hard Float kernel building.
-
Mi sembra di aver letto da qualche parte che questo kernel non sia sovrascribile con tutti gli altri kernel per una qualche questione concernente la ramdisk e se ne consigliava l'installazione sopra il kernel stock. Se é corretto ciò che ho appena riportato occorrerebbe specificarlo nel primo post magari con un link al kernel stock