Visualizzazione stampabile
-
Quote:
Originariamente inviato da
wluca97
sono riuscito a metterlo a posto grazie mille mi sei stato veramente utile senza di te lo avrei potuto anche buttare :)
Di niente :) siamo qua per questo.
Ps.. Per ringraziare gli utenti c'è il tasto thanks in basso a sinistra di ogni post
-
scusate se sono ot ma dopo che ho aggiornato a 4.2.2 le recovery hanno perso il touch.ho letto che la twpr 2.4.0.0 lo ha ma fa il mount usb?
scusate spero mi potete indirizzare sul thread giusto
-
Quote:
Originariamente inviato da
fillo82
scusate se sono ot ma dopo che ho aggiornato a 4.2.2 le recovery hanno perso il touch.ho letto che la twpr 2.4.0.0 lo ha ma fa il mount usb?
scusate spero mi potete indirizzare sul thread giusto
indirizzato qui :p
Comunque, nel secondo post c'è un suggerimento importante che ti può interessare :)
Sia la TWRP (io ho la 2.5.0.0) che la PhilZ hanno il mount usb ;) La TWRP è più conosciuta ma anche la PhilZ è davvero ben fatta..
-
si ma quella nel suggerimento e la twrp 2.4.0.0 e dicevano che non aveva il mount usb o che non andava???
-
Quote:
Originariamente inviato da
fillo82
si ma quella nel suggerimento e la twrp 2.4.0.0 e dicevano che non aveva il mount usb o che non andava???
si che funziona il mount usb sulla twrp vai tranquillo, io ogni volta le carico da recovery le cose :) se hai ancora l'hboot 1.36 o 1.39 non hai problemi con nessuna versione.. la 2.6.0.0 invece ha dato problemi a qualcuno solo con il nuovo hboot 1.72.
Questo da xda:
Quote:
Originariamente inviato da Juanig
Quote:
Originariamente inviato da mgmCube
I have hboot 1.72 and officially updated to sense 5, and installed twrp 2.6.0.0 and touch is working fine.
Before this I had twrp 2.5.0.0 with hboot 1.39 and sense 4+ and sense 5 with also working touch. Never had a problem.
I had no problems with 1.36 but now with 1.72 doesn´t work anymore and had to flash Phill´s... What is supposed to be done for TWRP to work again? maybe a repack or it must be updated by devs?
-
ho hboot 1.72 ora provero a mettere la 2.4.0.0 e vediamo.la 2.6.0.0 della twrp non va il touch e la cwm 5.8.3.1 neanche gia provate.
-
Fammi sapere cosi risolviamo questo mistero ricorrente una volta per tutte.. prova anche la Philz
-
allora con la 2.4.0.0 il touch va ma con nessuna recovery va il mount usb.
anche quando il telefono e acceso e collegato al pc non me lo vede come archivio di massa
-
Quote:
Originariamente inviato da
fillo82
allora con la 2.4.0.0 il touch va ma con nessuna recovery va il mount usb.
anche quando il telefono e acceso e collegato al pc non me lo vede come archivio di massa
Ok ho trovato una spiegazione qui (in grassetto):
Quote:
Originariamente inviato da
Souldrinker
Not strange at all.
As has been mentioned several times in this thread, even on this page any official update above 3.16 updates the touch panel drivers making them incompatible with twrp, except for the repacked 2.4.0.0_jb that have issues with adb and usb mount.
So for us who have officially upgraded with ruu or ota from htc can only get touch and usb working in Philz recovery.
Flashing a custom sense 5 rom doesn't change the touch drivers, making twrp still work if you've not officially upgraded.
But once you've upgraded you can't go back (unless you have s-off).
Io ho l'hboot 3.16 per questo non ho mai avuto problemi... Con una versione superiore ci sono problemi ai driver del touch, funziona solo la 2.4.0.0 ma senza adb l'usb mount.
Quindi, vai con la Philz
-
solo due parole...sei grande!grazie luke va tutto con la philz sia il mount usb che il touch.non mi resta che tenere quella e usare solo quella