4 allegato(i)
[Kernel] NEW PhilZ-cwm6 v2.7N * Safe Stock Kernel+CWM6 Touch+Dual USB Mount
Girovagando su xda ho trovato questo kernel appena uscito che magari per qualcuno potrebbe essere interessante.. Io l'ho installato oggi è vi darò le mie impressioni..
Praticamente è basato esclusivamente sul kernel stock, aggiungendo però varie funzionalità, come il full root con busybox e la cwm 6.0.1.4 e ora anche il doppio mount USB e la recovery Touch con nuove funzioni!!
Basta scegliere la versione dedicata alla propria rom, LRT, LRQ, ecc..
Premetto che prima di postarlo l'ho provato personalmente flashando la versione LRT tramite Odin Mobile e funziona perfettamente.
Vi rimando direttamente al link di xda che è molto lungo e completo:
[07.10.2012][PhilZ-cwm6] v2.7N * Safe Stock Kernel+CWM6, No BrickBug, Root - LRG... - xda-developers
Di seguito copia e incolla del post originale, e in fondo i LINK per il download CWM e ODIN alle versioni LRQ e LRT e per installazione e rimozione di CWM Manager, per le altre versioni vi rimando sempre al post originale.
Spero di aver fatto cosa gradita,
Ciao a tutti!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ-cwm6 - Custom Pure Stock Based Kernel
Now v2.7 with custom CWM6 Touch + Dual USB Mount
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
<<< Featuring Permanent Clockworkmod Recovery v6.0.1.4 Touch >>>
< init.d, customboot, root, adb root + dual USB mount in recovery >
** New since v2.7 ** Custom CWM6 based recovery: Touch + Dual USB Mount
Please note that a previous release of 2.7 was pulled in less than 24h to be replaced by a new 2.7 with cwm6 build 1.15 instead of 1.14. It only fixes a minor non vital bug.
Make sure you have the cwm6 build 1.15 (either by date of download or in log when flashing in recovery). If not sure, no issue, just download now and flash again or compare with your version
New Power Off menu:
Allegato 27538
Reboot in download mode menu:
Allegato 27539
Larger menus with bigger font and transparency effects. Bottom virtual touch buttons.
Selection on touch screen disabled for safety.
Allegato 27540
-Patched kernel to avoid brick bug issues on ICS 4.0.4
-Clockworkmod v6.0.1.4 recovery - Wipe /data safely in recovery
-Pure stock kernel (only ramdisk changes)
-Can be flashed in Stock Recovery (root + no yellow triangle) or in Odin
-ADB root in recovery: just wait about a minute to activate
-Init.d and customboot.sh support
-Introduced support for custom MULTI-bootanimation (bin and zip) ** NEW v2.5 **
-Now ro.secure is enabled, no more insecure kernel (adb root in recovery via cwm adbd) ** NEW v2.5 **
Now added support to Chainfire CWMManager full operations (include backup/restore) through an optional update: see post 2
PhilZ-cwm6 vs CF-Root: CF-Root is the all-times reference when we talk about custom stock based kernels. So, why PhilZ-cwm6 kernel?
Quote:
-PhilZ-cwm6 comes with Clockworkmod 6 for added features (incremental backups...) and smoother GUI (for touch version)
-PhilZ-cwm6 has patched kernel to disable MMC_CAP_ERASE : you can wipe/format in cwm6 safely
CWM 6 is also natively brickbug proof on wipe /data even on non patched kernel
-Both CF-Root and PhilZ-cwm6 support init.d and customboot.sh
-PhilZ-cwm6 is now no more true insecure. Like other custom kernels, ADB root access in recovery is through cwm adbd
-PhilZ-cwm6 introduces brand new and original support for multi-bootanimations ** NEW v2.5 **
-CF-Root is pre-rooted and will wipe any custom busybox on start-up.
-PhilZ-cwm6 comes rooted in a zip package that can be flashed directly in STOCK RECOVERY (ICS only): no yellow triangle or custom binary counter issues
-PhilZ-cwm6 in odin version is not pre-rooted: it can be easily done using any of my root scripts here
http://forum.xda-developers.com/show....php?t=1746794
-PhilZ-cwm6 comes natively with the last busybox 1.20.2, that is entirely part of the cwm recovery (/sbin/busybox)
-Now, PhilZ-cwm6 fully supports CWMManager by Chainfire
What Kernel to choose:
The important part is the Kernel code:
XXLRT-DBT
Kernel code is in red (LRT), for this example, you need an LRT ROM. However, often, you can mix kernels when they are close: LR5 kernel with LR6 ROM...
DBT code doesn't matter at all, I add it for reference, it is the CSC
XX: mixed, often doesn't matter for close regions. For example, XW and XX are often interchangeable. However, mixing a DD with an XX ROM or inversly, sometimes works, but often ends in a bootloop. In that case, either boot into recovery or download mode to reflash
in stock recovery 3e: No Yellow Triangle
Download xxx-signed.zip kernel matching your ROM
Put the previously downloaded xxx-signed.zip file on your external sd card
Boot into stock recovery (volume up+home+power)
Select "apply update from external storage".
Now select the xxx-signed.zip file you copied in previous step
You are rooted + new PhilZ-cwm6 kernel with CWM6
Odin packages instructions: ready for root
They come in the form of .tar.md5 file
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
to root, download the root file from here (Method 1) : [20 Sep 2012][ICS]Universal Rooting for most ICS phones, Any ROM, now with CWM6 - xda-developers
Allegato 25603
<< 07 oct 2012 - PhilZ-cwm6 v2.7 with Touch based enhanced recovery >>
** Update to touch recovery v1.15 **
PhilZ-cwm6-XXLRT-DBT-v2.7
PhilZ-cwm6-XXLRT-DBT-2.7-signed.zip
PhilZ-cwm6-XXLRT-DBT-2.7.tar.md5
PhilZ-cwm6-XXLRQ-DBT-v2.7
PhilZ-cwm6-XXLRQ-DBT-2.7-signed.zip
PhilZ-cwm6-XXLRQ-DBT-2.7.tar.md5
PhilZ-cwm6-XXLRI-AUT-v2.7
PhilZ-cwm6-XXLRI-AUT-2.7-signed.zip
PhilZ-cwm6-XXLRI-AUT-2.7.tar.md5
Per tutti gli altri link vi rimando al thread Xda ufficiale: [07.10.2012][PhilZ-cwm6] v2.7N * Safe Stock Kernel+CWM6, No BrickBug, Root - LRG... - xda-developers
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Quote:
Originariamente inviato da
OverDrive
Tutto fatto...
Saluti e... buon flash a tutti gli smanettoni rotfl
Ci facci sapere allora... :D
Inviato con riconoscimento vocale canino...
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Quote:
Originariamente inviato da
OverDrive
Ho combinato un pasticcio smanettando nel System con rootexplorer e le bootanimation!! Il note non risponde più!!! Ora mi trovo con questo Kernel Safe Stock, la CWM 6.0.1.4 dello stesso e però i Backup della stessa rom ma con kernel Custom... posso fare un restore??:'(
Flasha in kernel notecore da recovery.. Poi fai il restore..;)
Inviato dal mio GT-N7000 con Tapatalk 2
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Over....sono dieci minuti...come va?:confused:
Inviato dal mio GT-N7000 con Tapatalk 2
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Uffa volevo provarlo ma il fatto di flashare con ODIN pc non mi convince e qua non cè l'ho rotfl
Inviato dal mio non so cosa con Tapatalk
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
La cartella blobs è tutta spazzatura. Io l ho cancellata in toto anche perche 1.7 gb... Non ho avuto nessun problema
Inviato dal mio GT-N7000 con Tapatalk 2
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Quote:
Originariamente inviato da
wolvie80
Uffa volevo provarlo ma il fatto di flashare con ODIN pc non mi convince e qua non cè l'ho rotfl
Inviato dal mio non so cosa con Tapatalk
Perche odin pc? Non puoi farlo in cwm o con odin mobile?
E comunque mi sono letto il thread in xda e il kernel pare sicuro. Gia numerosi utenti hanno fatto wipe anche emmc senza problemi. Anche il baxkup e restore pare vada benissimo. Quindi l unica accortezza è scegliere il giusto kernel per firmware base e csc.
Inviato dal mio GT-N7000 con Tapatalk 2
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Quote:
Originariamente inviato da
Meda
Perche odin pc? Non puoi farlo in cwm o con odin mobile?
E comunque mi sono letto il thread in xda e il kernel pare sicuro. Gia numerosi utenti hanno fatto wipe anche emmc senza problemi. Anche il baxkup e restore pare vada benissimo. Quindi l unica accortezza è scegliere il giusto kernel per firmware base e csc.
Inviato dal mio GT-N7000 con Tapatalk 2
Tu hai flashato con Mobile Odin???
Il thread dice cosi
Quote:
per gli utenti che già hanno i privilegi di root,
devono flashare tramite ODIN PC, la versione del kernel abbinato alla base del firmware
Inviato dal mio non so cosa con Tapatalk
R: [Kernel] PhilZ-cwm6 v2.5N * Safe Stock Kernel+CWM6, No BrickBug, Root
Quote:
Originariamente inviato da
OverDrive
Wolvie ho flashato io già 2 volte il Kernel LRQ Safe con odin Mobile Pro in versione 3.0 senza nessun problema. Quindi vai tranquillo. Basta non usare versione di Odin Mobile come la 3.2.* o la 3.30 che sono buggate!
Grazie! Poi mi informo sulla spiegazine logica di sta cosa.
Io ho la 3.30 ho aggiornato all'ultima allora devo regredire...
Inviato dal mio non so cosa con Tapatalk