[KERNEL ICS/JB] DORIMANX GS2 Multi Platform DUALBOOT +Touch Recovery

[illuminato67]

Quote:

Originally Posted by gokhanmoral actually, there will be no change in the binary to fix dual boot with cm10. there may be some new features as I did in s3 part and those may require a change. but I will "only" change the mali drivers (already did but not tested) the gui selection part is just a dummy selection. it shows an image, writes 4-5 lines to screen and it creates only 3 syslinks in /res/dev folder, that simple. and the code is no more than 70 lines. all the rest are open and in the initramfs. I could keep them in the binary if I wanted to make it a proprietary and close. the only reason that I don't open the selection part is 1) to prevent too many "I did it myself" forks (kernels using that are required to give proper credits and I want to thank to dorimanx for that because I did not warn only him about that) and 2) that part is a little messy and it got even messier on s3... I have told about the details about dual booting to lots of people and I can share every single detail or answer any question about the functionality if anybody is interested. and it is even possible to see all the commands by looking into the binary by using "strings /sbin/busybox" command. it is not obfuscated.

DORIMANX:
Thanks GM for more detailed info, it's best to read it from you,
what i have found:
if we use new mali driver + all the rest parts ported by CM
+ use this config
CONFIG_ION=y
CONFIG_ION_EXYNOS=y (This one is crushing the binary)
CONFIG_ION_EXYNOS_CONTIGHEAP_SIZE=71680

(note: without CONFIG_ION_EXYNOS we loose camera and video decoder)

Dual boot binary cant start in dualboot mode and display the logo + the 1,2,3

it's failing with unexpected buffer or something like that...
and not doing the ln -s to /dev/"partitions"

all the rest init script run and we stuck without /system/ + /data
mounted partitions.

if i force it to work with nologo then, it's works, but not asking for second boot.

something wrong with memory allocation for the logo from video driver.
i hope that you can somehow find the solutions, but if it's will be faster just to remove the need to show the logo, and do only the counter!
then it's will be also very good solution! we can boot without LOGO (small bummer, but oh well)

Thanks, i hope it's helps.

Godoooooooo!!!!

[gordon320]

Può essere...intanto 58% residuo con 30 ore sulla batteria...certo 1.30 ore di screen on e 20 di chiamata ecc. ecc. senza cortexbrain attivi con pegasusq bloccato a 800 senza undervolt ma con underclock...figo... v.5.89...rom Samsung

inviato da ? con il mio S?

Domanda stupida ma sono ancora un po ignorante in materia... L'UV si fa da extweaks o voltage control, mentre l'underclock? Potresti spiegarmi come si fa, che app serve e i valori? Ti ringrazio in anticipo

Inviato dal mio GT-I9100 con Tapatalk 2

[illuminato67]

Domanda stupida ma sono ancora un po ignorante in materia... L'UV si fa da extweaks o voltage control, mentre l'underclock? Potresti spiegarmi come si fa, che app serve e i valori? Ti ringrazio in anticipo

Inviato dal mio GT-I9100 con Tapatalk 2

Puoi fare tutto tramite ExTweaks

[gordon320]

Puoi fare tutto tramite ExTweaks

L'UC in Extweaks dov'è? È mica la colonnina della GPU? Potresti spiegarmi
un po?
Inviato dal mio GT-I9100 con Tapatalk 2

[illuminato67]

L'UC in Extweaks dov'è? È mica la colonnina della GPU? Potresti spiegarmi
un po?
Inviato dal mio GT-I9100 con Tapatalk 2

Primo Tab (CPU): imposti la freq Max=qui imposti UC (scaling_max_freq) e Min (scaling_min_freq)

[N1m0Y]

L'UC in Extweaks dov'è? È mica la colonnina della GPU? Potresti spiegarmi
un po?
Inviato dal mio GT-I9100 con Tapatalk 2

Puoi underclockare semplicemente abbassando la frequenza massima della CPU

Inviato dal mio GT-I9100 con Tapatalk 2

[jcoax]

Quote:

Originally Posted by gokhanmoral actually, there will be no change in the binary to fix dual boot with cm10. there may be some new features as I did in s3 part and those may require a change. but I will "only" change the mali drivers (already did but not tested) the gui selection part is just a dummy selection. it shows an image, writes 4-5 lines to screen and it creates only 3 syslinks in /res/dev folder, that simple. and the code is no more than 70 lines. all the rest are open and in the initramfs. I could keep them in the binary if I wanted to make it a proprietary and close. the only reason that I don't open the selection part is 1) to prevent too many "I did it myself" forks (kernels using that are required to give proper credits and I want to thank to dorimanx for that because I did not warn only him about that) and 2) that part is a little messy and it got even messier on s3... I have told about the details about dual booting to lots of people and I can share every single detail or answer any question about the functionality if anybody is interested. and it is even possible to see all the commands by looking into the binary by using "strings /sbin/busybox" command. it is not obfuscated.

Godoooooooo!!!!

amicosss... traduzioneee?? hahaha

[illuminato67]

amicosss... traduzioneee?? hahaha

Te l'aggia fa in Napoletano????

[N1m0Y]

amicosss... traduzioneee?? hahaha

Magari

Inviato dal mio GT-I9100 con Tapatalk 2

[jcoax]

Te l'aggia fa in Napoletano????

hehehe anche... io capisco, gli altri non so...