[ZOPO 980/990/C2/C3/C7] ROM KitKat 4.4.2

My phone with ROM "C2/Version A" is turn off suddenly, so I have to turn on the phone all the time. This happens generally when the battery is less than 50% charged. It is normal with this ROM?

Quote:

---

Originariamente inviato da nayton

My phone with ROM "C2/Version A" is turn off suddenly, so I have to turn on the phone all the time. This happens generally when the battery is less than 50% charged. It is normal with this ROM?

---

What is your cell? Give as many info as you can when you report some problem.

Have you try to do a clean install? Do a full wipe before installing.

Also try disabling S2W, DT2W

Quote:

---

Originariamente inviato da Proteusso

Salve, non so se è stato già evidenziato ma cercare in 186 pagine è troppo lungo ...
Ho installato la vers. 1.0.7 e ho notato che le suonerie non proseguono in continuo ma si interrompono e si ripetono dopo pochi secondi ... problema comune? C'è qualche soluzione nascosta?
Grazie

---

Lo fa anche a me, x questioni più significative non ho mai chiesto spiegazioni in merito a Paolo, ma ora che sono quasi in astinenza da flashare ;) possiamo chiedere

Datemi un Android e vi solleverò il mondo. Datemi un iPhone e lo getterò via.

Quando collego il cellulare al PC devo lasciare lettore multimediale oppure memoria usb. Se lascio memoria usb il PC non lo vede, se lascio lettore multimediale il PC lo vede ma mi dice che ho poca memoria, mentre il cellulare a 32giga di memoria. Perché. Chiedo aiuto.

Inviato dal mio ZOPO 9xxQuad usando Androidiani App

Ho installato la 1.07.grazie

Inviato dal mio ZOPO 9xxQuad usando Androidiani App

Quote:

---

Originariamente inviato da semperfi

To fix proximity sensor in call:

Edit build.prop by adding the following two lines at the bottom.

ro.lge.proximity.delay=25
mot.proximity.delay=25

After that, go to GravityBox KK / power tweaks and enable Proximity wake-up.

At me works verry well!

---

Per favore, qualcuno può spiegare meglio questo passaggio? Mi piacerebbe provarlo

Edit: le 2 righe le ho aggiunte ma io in gravitybox non trovo nessun Power tweaks :(:(

Edit 2: ho impostato gravity in inglese e ho fatto :) a domani le prove di rito

Quote:

---

Originariamente inviato da vayavalla

What is your cell? Give as many info as you can when you report some problem.

Have you try to do a clean install? Do a full wipe before installing.

Also try disabling S2W, DT2W

---

I have um ZOPO C2 PLATINUN 16G ROM, 1GB RAM Version B, but with ROM C2/Version A (because the screen and landscren UPSIDE DOWN)

I made one test.
I waited the screen turn off and after I made Double Tap in the screen and the phone turns off. How can I fix this?

Quote:

---

Originariamente inviato da nayton

I have um ZOPO C2 PLATINUN 16G ROM, 1GB RAM Version B, but with ROM C2/Version A (because the screen and landscren UPSIDE DOWN)

I made one test.
I waited the screen turn off and after I made Double Tap in the screen and the phone turns off. How can I fix this?

---

You can disable it when you flash the ROM, our you can disable it later by opening a terminal app and running:

First: "su"
Second: "sets2w"

And there you can set the different values.

https://www.androidiani.com/forum/sh....php?p=6072045

Quote:

---

Originariamente inviato da vayavalla

You can disable it when you flash the ROM, our you can disable it later by opening a terminal app and running:

First: "su"
Second: "sets2w"

And there you can set the different values.

https://www.androidiani.com/forum/sh....php?p=6072045

---

Tks,I think that will go work. I will test in the next two days and I will send the feeedback.

Thanks for the answer, but I did not help unfortunately. When approaching the phone to ear the screen turns off, but after 2 seconds again turn on. I'm in the first post was wrong, is not caused by a screensaver and just the sensor is triggered and a couple of seconds, and then turns on the screen