Visualizzazione stampabile
-
-
Quote:
Originariamente inviato da
marsapa
Tranquillo procedi
è normale che mi ritrovo gli account facebook Google e altri?
il wipe no doveva piallare tutto?
prima attivando un'applicazione potevo lanciarne un'altra tappando sul tasto home, ora sembra che il tasto home non funzioni, come passo da un'app all'altra?
-
Quote:
Originariamente inviato da
Cico78
Con il programma root boster su v10 utilizzando la modalità risparmio batteria ho questo risultato poco soddisfacente.
http://images.tapatalk-cdn.com/15/05...ab7ef7cc76.jpg
Praticamente senza utilizzo perché sono a lavoro,con 3G attivo.
Cosa posso fare?c'è bisogno che si stabilizzi dopo il flash della v10?
Ho cambiato questa impostazione così....può andare bene/meglio?
http://images.tapatalk-cdn.com/15/05...aa2bccaeb1.jpg
-
sempre relativamente alla v. 10:
ho scelto in fase di installazione il launcher miui (ho sempre adorato le rom miui....) ma le scritte sono tutte in cinese, c'è possibilità di cambiarle?
-
Quote:
Originariamente inviato da
DeejayAlex73
Rifai un reset di fabbrica
rifatto tutto e ora tutto ok!
grazie
-
Quote:
Originariamente inviato da
paveltrufi
Anyway, it stills not passing from formatting until I unplug the battery; then, everytime I re-entry to the recovery appears theese logs:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
I don't know why there is no way for me to format the cache; and it's impossible to install any ROM through recovery
I had the very same problem sometime ago. I restarted in recovery, connected the PC and then connected with the phone with adb becoming root with su. I discovered the correct cache partition (you can mount it from the recovery, grep on /proc/mounts to find the device and then umount it again) then zeroed it with dd. When it finished I recreated the filesystem by hand with mkfs. A tricky procedure but worked like a charm... you need some Linux skill to carry it out correctly.
-
Mah devo dire che l'autonomia della v10 mi ha un po' deluso... Ho l impressione che con la v5 reggeva di più
Inviato dal mio ZP999 usando Androidiani App
-
Quote:
Originariamente inviato da
Forenait
Mah devo dire che l'autonomia della v10 mi ha un po' deluso... Ho l impressione che con la v5 reggeva di più
Inviato dal mio ZP999 usando
Androidiani App
Se non fare 4-5 cicli non potete giudicare
-
Quote:
Originariamente inviato da
zipman
[quote name="paveltrufi" post=6780256]Anyway, it stills not passing from formatting until I unplug the battery; then, everytime I re-entry to the recovery appears theese logs:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
I don't know why there is no way for me to format the cache; and it's impossible to install any ROM through recovery
I had the very same problem sometime ago. I restarted in recovery, connected the PC and then connected with the phone with adb becoming root with su. I discovered the correct cache partition (you can mount it from the recovery, grep on /proc/mounts to find the device and then umount it again) then zeroed it with dd. When it finished I recreated the filesystem by hand with mkfs. A tricky procedure but worked like a charm... you need some Linux skill to carry it out correctly.[/QUOTE]
I just had the same problem totay.
Tray again whit battery charged at 100%
Inviato dal mio ZP999 usando Androidiani App
-
Quote:
Originariamente inviato da
DeejayAlex73
Ma anche se non si fanno prima di installare la ROM e si fa un reset di fabbrica cancellando tutto subito dopo averla installata, in teoria non è la stessa cosa?
No cancelli le app aggiunte da marsapa