Originariamente inviato da
091Ryuk132
per quanto riguarda problemi al microfono un po' ho migliorato flashando un'altra ROM ed modificando tramite mobileuncletool i seguenti parametri:
Basics first: Terms and their meaning.
Sph – Speaker volume levels during a telephone conversation,
Mic – microphone sensitivity levels (note that it is not microphone volume),
Ring – ringer volume,
Media – volume while playing music, movies, games,
FMR – FM radio volume,
Matv – TVB Volume
Max Vol: 160 (you cannot set it, except in type -> media)
Steps:
A. Open Mobile Uncle Tools and open engineering mode.
B. Under engineering mode, go to ‘Audio’.
C. Go to ‘Normal Mode’.
C1. Under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0'.
C2. Under ‘Value is 0~255' enter 255. For all levels, from level 0-6 set the value as 255.
This will ensure that your voice is audible to other person even when you turn down the speaker volume.
Feel free with lower values if other person is hearing you too loud.
Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
C3. Next, under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0'.
C4. Enter these values under ‘Value is 0~160' for various levels.
Level 0 -> 100
Level 1 -> 120
Level 2 -> 130
Level 3 -> 135
Level 4 -> 140
Level 5 -> 150
Level 6 -> 160
Again, feel free to experiment with these settings if the earpiece speaker volume is too low or too high for you.
Apply the same settings (above) to ‘Headset Mode’ -> Sph, ‘Loudspeaker Mode’ -> Sph